Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 606-074-6 | CAS number: 18621-17-5
Guidance on Safe Use
Administrative data
First-aid measures
Following inhalation
Remove victim to fresh air. If not breathing, give artificial respiration, better not to mouth-to-mouth. If breathing is difficult, give oxygen. Consult medical personnel.
Following skin contact
Wash material off the skin with plenty of soap and water. If redness, itching or a burning sensation develops, get medical attention.
Following eye contact
Immediately flush with plenty of water for at least 15 minutes. If redness, itching or a burning sensation develops, have eyes examined and treated by medical personnel.
Following ingestion
Provided the patient is conscious, wash out mouth with water. Vomiting should only be induced under the direction of a physician or a poison control centre.
Fire-fighting measures
Suitable extinguishing media
Use extinguishing media appropriate, such as water spray, alcohol-resistant foam, dry chemical powder or carbon dioxide, for surrounding fire.
Unsuitable extinguishing media
Avoid high pressure media which could cause the formation of a potentially explosible dust.
Special hazards arising from the substance or mixture
Emit toxic fumes under fire conditions, such as carbon oxides, Nitrogen oxides (NOx);
If substance is an organic solid, fine dust dispersed in air in sufficient concentrations in the presence of an ignition source is a potential for a dust explosion hazard.
Advice for fire-fighters
Keep containers cool with water spray and on special protective equipment for firefighters, such as boots, overalls, gloves, eye and face protection and breathing apparatus.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
For non-emergency personnel
a) the wearing of suitable protective equipment (including personal protective equipment referred to under Section 8 of the safety data sheet)to prevent any contamination of skin, eyes and personal clothing;
b) removal of ignitionsources, provision of sufficient ventilation, control of dust; and
c) Emergency procedures such as the need to evacuate the danger area or to consult an expert.
For emergency responders
Wear positive pressure self-contained breathing apparatus, wear anti - toxic, anti - static, wear chemical anti - penetration gloves.
Environmental precautions
Prevent entry to sewers and public waters.
Methods and material for containment and cleaning up
For containment
Contain solid spills with appropriate barriers and prevent migration and entry into sewers or streams.
For cleaning up
Clean up spills immediately and dispose of waste safely. Recover the product by vacuuming, shovelling or sweeping. Transfer spilled material to a suitable container for disposal. Contact competent authorities after a spill.
Handling and storage
Precautions for safe handling
a) Take measures to prevent the build-up of electrostatic charge.
b) Provide appropriate exhaust ventilation at places where dust is formed.
c) Not to eat, drink, smoke in work areas.
d) To wash hands after use.
e) To remove contaminated clothing and protective equipment before entering eating areas.
Conditions for safe storage, including any incompatibilities
Technical measures and storage conditions
a) Store away from incompatible substances.
b) Keep tightly closed and store in a dry place and well-ventilated place.
c) Recommended Temperature controlled NMT30℃ for storage.
d) Hygroscopic. Store under inert gas.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not applicable
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not applicable
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not applicable
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not applicable
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Appropriate engineering controls
a) Suitable eye/body wash equipment should be available in the vicinity of any potential exposure.
b) Ensure adequate ventilation, especially in confined areas.
c) Use explosion-proof electrical appliances, ventilation, lighting and other equipment.
d) Set up emergency evacuation routes and necessary evacuation zones.
Personal protective equipment
Eye / Face protection
Use equipment for eye/faceprotection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
a) Wear suitable protective clothing.
b) Handle with gloves.Gloves must be inspected prior to use. Use proper gloves removal technique (without touching glove`s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
c) The selected protective gloves have to satisfy the specifications of Regulation(EU 2016/425)and the standard EN 374 derived from it.
d) This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Body protection
Choose body protection in relation to its type, to the concentration and amount of dangerous substance, and to the specific work-place,the type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95(US)or type P1(EN143) dust masks.use respirators and components tested and approved under appropriate gpvernment standards such as NIOSH(US)or CEN(EU).
Control of environmental exposure
No special environmental precautions required.
Stability and reactivity
Reactivity
No data available.
Chemical stability
The substance is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Possibility of hazardous reactions
No data available.
Conditions to avoid
Direct sunlight, extremely high temperatures, hygroscopic and incompatible materials.
Incompatible materials
Strong acids, strong bases, strong oxidizers.
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions.--Carbon monoxide, Carbon dioxide, Nitrogen oxides and others.
Disposal considerations
Waste treatment methods
a) Dispose of contents/container in accordance with local, regional, national, and international regulations. Avoid release to the environment.
b) Contaminated packaging dispose of as unused product.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
