Cuprate(4-), [C-(aminosulfonyl)-C-[[[2-[[4-chloro-6-[(2,5-disulfophenyl)amino]-1,3,5-triazin-2-yl]amino]ethyl]amino]sulfonyl]-29H,31H-phthalocyanine-C,C-disulfonato(6-)-N29,N30,N31,N32]-, sodium salts

Explosiveness

Link to relevant study record(s)

Reference

Endpoint:

explosiveness, other

Type of information:

experimental study

Adequacy of study:

key study

Study period:

1 June 1993 and 28 June 1993

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Reason / purpose for cross-reference:

reference to same study

Reason / purpose for cross-reference:

reference to same study

Reason / purpose for cross-reference:

reference to same study

Qualifier:

according to guideline

Guideline:

EU Method A.14 (Explosive properties)

Version / remarks:

Method A14 of Commission Directive 92/ 69/ EEC (which constitutes Annex V of Council Di rective 67/ 548/ EEC).

Deviations:

not specified

GLP compliance:

yes (incl. QA statement)

Specific details on test material used for the study:

No further details specified in the study report.

Key result

Parameter:

other: BAM FALL HAMMER TEST

Remarks on result:

other: No signs of ignition or explosion on impact. When the test assembly was dismantled there were no signs of decomposition.

Key result

Parameter:

other: BAM FRICTION TEST

Remarks on result:

other: No signs of ignition or explosion .

Key result

Parameter:

thermal sensitivity - Koenen test: diameter of the orifice plate

Remarks:

2 mm

Remarks on result:

not thermal sensitive if heated under defined confinement

Key result

Parameter:

thermal sensitivity - Koenen test: diameter of the orifice plate

Remarks:

6 mm

Remarks on result:

not thermal sensitive if heated under defined confinement

BAM FALL HAMMER TEST

Test 1: No signs of ignition or explosion on impact. When the test assembly was dismantled there were no signs of decomposition.

Test 2: No signs of ignition or explosion on impact. When the test assembly was dismantled there were no signs of decomposition.

Test 3: No signs of ignition or explosion on impact. When the test assembly was dismantled there were no signs of decomposition.

Test 4: No signs of ignition or explosion on impact. When the test assembly was dismantled there were no signs of decomposition.

Test 5: No signs of ignition or explosion on impact. When the test assembly was dismantled there were no signs of decomposition.

Test 6: No signs of ignition or explosion on impact. When the test assembly was dismantled there were no signs of decomposition.

 

RESULT: Negative.

 

BAM FRICTION TEST

Test 1: No signs of ignition or explosion.

Test 2: No signs of ignition or explosion.

Test 3: No signs of ignition or explosion.

Test 4: No signs of ignition or explosion.

Test 5: No signs of ignition or explosion.

Test 6: No signs of ignition or explosion.

 

RESULT: Negative.

 

KOENEN STEEL TUBE TEST

2 mm Orifice Plate
Test		T1	T2
1 2 3	Tube recovered unchanged. Tube recovered unchanged. Tube recovered unchanged.	38 36 37	300 300 300
6 mm Orifice Plate
Test		T1	T2
1 2 3	Tube recovered unchanged. Tube recovered unchanged. Tube recovered unchanged.	59 55 59	300 300 300

Where:

T1 = time (in seconds) from application of the flame to a noticeable effect from the orifice

T2 = time (in seconds) from application of the flame to the recorded event (e.g. explosion) or as in these tests, to the end of the test with no record event.

 

RESULT: Negative

Interpretation of results:

GHS criteria not met

Conclusions:

JPR BLUE 100 has been determined not to have explosive properties.

Executive summary:

A number of hazardous physico-chemical properties of the compound JPR BLUE 100 (Lot Number 303001) have been determined at the request of the sponsor.

 

The Explosiveness study complied with Method A14 of Commission Directive 92/ 69/ EEC (which constitutes Annex V of Council Directive 67/ 548/ EEC).

 

JPR BLUE 100 has been determined not to have explosive properties.

Description of key information

JPR BLUE 100 has been determined not to have explosive properties.

Key value for chemical safety assessment

Explosiveness:

non explosive

Additional information

A number of hazardous physico-chemical properties of the compound JPR BLUE 100 (Lot Number 303001) have been determined at the request of the sponsor.

The Explosiveness study complied with Method A14 of Commission Directive 92/ 69/ EEC (which constitutes Annex V of Coucil Directive 67/ 548/ EEC).

JPR BLUE 100 has been determined not to have explosive properties.

Justification for classification or non-classification

JPR BLUE 100 has been determined not to have explosive properties, therefore, does not trigger any classification requirements under CLP regulations .