Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
Reaction mass of Trisodium (7-(2,6-difluoro-pyrimidine-4-ylamino)-3-(5-ethenesulfonyl-2-hydroxy-3-sulfophenylazo)-4-hydroxy-naphthalene-2-sulfonato)cuprate(II) and Disodium (7-(2,6-difluoro-pyrimidine-4-ylamino)-3-(5-ethenesulfonyl-2-hydroxy-3-sulfophenylazo)-4-hydroxy-naphthalene-2-sulfonato)cuprate(II)
EC number: 479-550-2 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Move exposed person to fresh air; in case of indisposition
seek medical advice.
Emergency measure - Eyes: Rinse with plenty of water; if irritation occurs, seek
medical advice.
Emergency measure - Skin: Wash with soap and water.
Emergency measure - Ingestion: Symptomatic treatment; in case of indisposition seek medical
advice.
Fire-fighting measures
Recommended extinguishing agent: Water, dry powder, foam
Product arising from burning: Combustion products may contain carbon, nitrogen and sulfur
oxides as well as sodium and chlorinated derivatives
Product determined by test: N
Protective equipment: Wear self contained breathing apparatus
Accidental release measures
Emergency measures in case of spillage: Avoid skin and eye contact. Don't inhale dust. Wear
appropriate personal protective equipment (see "Handling").
Solids: sweep up avoiding formation of dust (wet powders
with water or use an approved industrial vacuum cleaner)
and place in suitable according to TRGS 201 labelled
containers for disposal.
Liquids: absorb using an adequate absorbent (such as
kieselgur, sand, saw dust), collect and place in suitable
according to TRGS 201 labelled containers for disposal.
Dispose of waste material in authorized incineration
facilities.
Handling and storage
Handling: Alle Arbeitsverfahren sind grundsätzlich so zu gestalten,
dass die Belastung durch Einatmen des Stoffes so gering wie
möglich sowie der Augenkontakt ausgeschlossen ist.
Bei Abfüll-, Umfüll- und Dosierarbeiten sowie bei
Probenahmen sollten geschlossene bzw. zumindest staubdichte
Vorrichtungen verwendet werden. Beim Umgang in offenen
Systemen sollte möglicher Staub unmittelbar am
Entstehungsort abgesaugt werden. Wenn technische
Absaug- oder Lüftungsmaßnahmen nicht möglich oder
unzureichend sind, sollte Atemschutz (z.B.:::) getragen
werden. Zur Vermeidung von Hautkontakt sollten geprüfte
Schutzhandschuhe (z.B. aus PVC oder Nitrilkautschuk) und
geeignete Schutzkleidung (z.B.:::) getragen werden.
Ein sicherer Augenschutz (z.B. Korbbrille) ist unbedingt
erforderlich. In unmittelbarer Nähe des Arbeitsbereiches
sollten Augenbrausen bereitgestellt und ihr Standort
auffällig gekennzeichnet werden. Bei möglicher
Staubentwicklung sollten wegen der potentiellen
Staubexplosionsgefahr potentielle Zündquellen aus dem
Arbeitsbereich entfernt werden. Des weiteren sollten
Maßnahmen gegen elektrostatische Aufladungen getroffen
werden.
"ENGLISH"
Work processes must always be designed so that the exposure
by inhalation of the substance is as low as possible and eye
contact is excluded. Closed or at least dustproof equipment
should be used during filling, transfer, metered feeding and
sampling. In the cause of handling in open systems, any dust
that may form should be extracted directly at the point of
origin.
If technical extraction or ventilation measures are not
possible or are insufficient, respiratory protection (e.g
.::) should be worn. To avoid skin contact, tested gloves
(e.g. made of PVC or nitrile rubber) and suitable protective
clothing (e.g.:::) should be worn. Safe eye protection (e.g.
tightly fitting goggles) is absolutely essential.
Eye douches should be made available in the immediate
vicinity of the work area and their location conspicuously
labelled. If dust forms, due to the potential risk of a dust
explosion, potential ignition sources should be removed from
the work area. In addition, measures should be taken to
prevent static discharge.
Storage: The substance should be stored in well sealed, according to
the regulations labelled and secure containers in adequate
rooms at room temperature. The containers should be secured
against falling down. Avoid residue outside the containers.
Packaging of the substance and or preparation: Adequate plastic containers
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport: Not classified
Transport in well sealed suitable containers. The containers
should be secured against falling down. Label containers in
accordance with pertinent regulations.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: Not known
Chemical reaction with water: No dangerous reaction with water.
Dust explosion: Not to be expected if handled under good industrial hygiene
practices.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Normal application results in the consumption of ca. 90 %
by irreversible binding to the cellulose fibers; recovery
or recycling of the remaining test substance is not
possible.
Industry - Possibility of neutralisation: No suitable method known
Industry - Possibility of destruction: controlled discharge: Not suitable for deposit in landfill site
Industry - Possibility of destruction - incineration: Incineration with flue gas scrubbing
Industry - Possibility of destruction - water purification: Removal by controlled discharge to a waste water treatment
plant. It is estimated that approx. 10 % of the total
quantity used is discharged into internal industrial
effluents as highly diluted solution. A purification of the
waste water in a waste water treatment plant is recommended.
The dyestuff should be used in a well equiped dyehouse. If
necessary the waste water can be purified prior to the waste
water treatment by membrane filtration or by flocculation
with cationic agents or by treatment with cationic agents or
by treatment with ozone. The most effective method is the
membrane filtration: more than 99 % of the remaining
dyestuff can be removed from the waste water.
Industry - Possibility of destruction - other: None
Public at large - Possibility of recovery/recycling: Not applicable
Public at large - Possibility of neutralisation: Not applicable
Public at large - Possibility of destruction: controlled discharge: Not applicable
Public at large - Possibility of destruction - incineration: Incineration with flue gas scrubbing
Public at large - Possibility of destruction - water purification: Removal by controlled discharge to a waste water treatment
plant.
Public at large - Possibility of destruction - others: None
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
