Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

General information: In case of accident or if you feel unwell, seek medical advice immediately.

After inhalation: Supply fresh air. Seek medical treatment.

After skin contact: Immediately rinse with water. Immediately remove all soiled and contaminated clothing. Seek medical treatment.

After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.

After swallowing: Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.

Most important symptoms and effects, both acute and delayed No further relevant information available.

Indication of any immediate medical attention and special treatment needed: No further relevant information available.

Fire-fighting measures

Extinguishing media

Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions. CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

For safety reasons unsuitable extinguishing agents: Water with full jet

Special hazards arising from the substance or mixture:

In case of fire, the following can be released: Chlorine, Hydrogen chloride (HCl)

Advice for firefighters

Protective equipment:

Wear self-contained respiratory protective device.

Wear fully protective suit.

Additional information

Collect contaminated fire fighting water separately. It must not enter the sewage system.

Prevent any seepage into the ground.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

The usual precautionary measures are to be adhered to when handling chemicals.

Wear protective equipment. Keep unprotected persons away.

Avoid formation of dust.

Environmental precautions:

Do not allow product to reach sewage system or any water course.

Do not allow to penetrate the ground/soil.

Methods and material for containment and cleaning up:

Pick up mechanically.

Send for recovery or disposal in suitable receptacles.

Reference to other sections

See Section 7 for information on safe handling.

See Section 8 for information on personal protection equipment.

See Section 13 for disposal information.

Handling and storage

Precautions for safe handling

Wear protective equipment. Keep unprotected persons away.

The usual precautionary measures are to be adhered to when handling chemicals.

Provide suction extractors if dust is formed.

Information about fire - and explosion protection: The product is not combustible.

Conditions for safe storage, including any incompatibilities

Storage:

Requirements to be met by storerooms and receptacles: Corrosive action on metals.

Information about storage in one common storage facility: Not required.

Further information about storage conditions: Keep container tightly sealed.

Specific end use(s): No further relevant information available.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN3260
Shipping information
Proper shipping name and description:
3260 CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Ruthenium(III) chloride hydrate)
Chemical name:
Ruthenium trichloride (hydrate)
Labels:
8
Special provisions / remarks
Remarks:
Environmental hazards: Not applicable.
Special precautions for user: Warning: Corrosive substances.
Danger code (Kemler): 80
Segregation groups: Acids
Limited quantities (LQ): 1 kg
Transport category: 2
Tunnel restriction code: E
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN3260
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Ruthenium(III) chloride hydrate)
Chemical name:
Ruthenium trichloride (hydrate)
Labels:
8
Special provisions / remarks
Remarks:
Environmental hazards: Not applicable.
Special precautions for user Warning: Corrosive substances.
Danger code (Kemler): 80
Segregation groups: Acids

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN3260
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Ruthenium(III) chloride hydrate)
Chemical name:
Ruthenium trichloride (hydrate)
Labels:
8
Special provisions / remarks
Remarks:
Special precautions for user Warning: Corrosive substances.
Danger code (Kemler): 80
Segregation groups Acids

Additional transport information

Additional information
Special provisions / remarks / other:
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code: Not applicable.
UN "Model Regulation": UN3260, CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Ruthenium(III) chloride hydrate), 8, II

Exposure controls / personal protection

Additional information about design of technical facilities: Ensure good ventilation/exhaustion at the workplace.

Control parameters

Ingredients with limit values that require monitoring at the workplace:

Additional information: The lists valid during the making were used as basis.

Exposure controls

Personal protective equipment:

General protective and hygienic measures: The usual precautionary measures are to be adhered to when handling chemicals. Do not eat, drink, smoke or sniff while working. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin. Immediately remove all soiled and contaminated clothing

Respiratory protection: Use respiratory protective device against the effects of fumes/dust/aerosol. Filter P3

Protection of hands: Protective gloves

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation

Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable: Fluorocarbon rubber (Viton)

Eye protection: Tightly sealed goggles

Stability and reactivity

Reactivity

Chemical stability

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.

Possibility of hazardous reactions: No dangerous reactions known.

Conditions to avoid: No further relevant information available.

Incompatible materials: Corrosive action on metals.

Hazardous decomposition products: Chlorine, Hydrogen chloride (HCl)

Additional information: -

Disposal considerations

Waste treatment methods

Recommendation Disposal must be made according to official regulations.

Uncleaned packaging:

Recommendation: Disposal must be made according to official regulations.

Recommended cleansing agents: Water, if necessary together with cleansing agents.