Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 609-333-1 | CAS number: 37143-54-7
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid-measures
First aid personnel should pay attention to their own safety. If the patient is likely to become unconscious, place and transport in stable sideways position (recovery position). Immediately remove contaminated clothing.
If inhalted: Keep patient calm, remove to fresh air, seek medical attention. Immediately inhale corticosteriod close aerosol.
On skin contact: Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.
On contact with eyes: Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
On ingestion: Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Most important symptoms and effects, both acute and delayed
Symptoms: The most important known symptoms and effects are described in the labelling (see section 2) and/or in seciton 11. Further symptoms are possible
Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital funtions), no known specific antidote.
First aid personnel should pay attention to their own safety. If the patient is likely to become unconscious, place and transport in stable sideways position (recovery position). Immediately remove contaminated clothing.
If inhalted: Keep patient calm, remove to fresh air, seek medical attention. Immediately inhale corticosteriod close aerosol.
On skin contact: Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.
On contact with eyes: Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
On ingestion: Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Most important symptoms and effects, both acute and delayed
Symptoms: The most important known symptoms and effects are described in the labelling (see section 2) and/or in seciton 11. Further symptoms are possible
Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital funtions), no known specific antidote.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
water spray, dry powder, foam, carbon dioxide
Special hazards arising from the substance or mixture
nitrogen oxides, carbon oxides
The substances/groups of substances mentioned can be released in case of fire. Under certain conditions in case of fire other hazardous combustion products may be generated.
Advice for fire-fighters
Special protective equipment:
Wear self-contained breathing apparatus and chemical-protective clothing.
Futher information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Suitable extinguishing media:
water spray, dry powder, foam, carbon dioxide
Special hazards arising from the substance or mixture
nitrogen oxides, carbon oxides
The substances/groups of substances mentioned can be released in case of fire. Under certain conditions in case of fire other hazardous combustion products may be generated.
Advice for fire-fighters
Special protective equipment:
Wear self-contained breathing apparatus and chemical-protective clothing.
Futher information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Accidental release measures
Personal precaution, protective equipment and emergency procedures
Avoid inhalation: Avoid contact with the skin, eyes and clothing.
Environmental precautions
Do not discharge into drains/surface water/groundwater
Methods and material for containment and cleaning up
For small amounts: Pick up with suitable appliance and dispose of.
For large amounts: Pick up with suitable appliance and dispose of.
Reference to other sections
Information regarding exposure controls/personal protection and disposal considerations can be found in section 8 and 13.
Avoid inhalation: Avoid contact with the skin, eyes and clothing.
Environmental precautions
Do not discharge into drains/surface water/groundwater
Methods and material for containment and cleaning up
For small amounts: Pick up with suitable appliance and dispose of.
For large amounts: Pick up with suitable appliance and dispose of.
Reference to other sections
Information regarding exposure controls/personal protection and disposal considerations can be found in section 8 and 13.
Handling and storage
Precautions for safe handling
Ensure thorough ventilation of stores and work areas.
Protection against fire and explosion.
Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.
Conditions for safe storage, including any incompatibilities
Segregate from acids and acid forming substances.
Further information on storage conditions: keep container tightly closed in a cool, well-ventilated place.
Storage stability: storage duration: 24 months
From the data on storage duration in this safety data sheet no agreed statement regarding the warantee of application properties can be deduced.
Specific end use(s):
For the relevant identified use(s) listed in section 1 the advice mentioned in the section 7 is to be observed.
Ensure thorough ventilation of stores and work areas.
Protection against fire and explosion.
Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.
Conditions for safe storage, including any incompatibilities
Segregate from acids and acid forming substances.
Further information on storage conditions: keep container tightly closed in a cool, well-ventilated place.
Storage stability: storage duration: 24 months
From the data on storage duration in this safety data sheet no agreed statement regarding the warantee of application properties can be deduced.
Specific end use(s):
For the relevant identified use(s) listed in section 1 the advice mentioned in the section 7 is to be observed.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 2733
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- 2733
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- 2733
Shipping information
- Proper shipping name and description:
- Amines, flammable, corrosive, N.O.S. (contains 1-Methoxy-2-propanamine)
- Chemical name:
- 1-Methoxy-2-propanamine
- Labels:
- 3, 8
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 2733
Shipping information
- Proper shipping name and description:
- Amines, flammable, corrosive, N.O.S. (contains 1-Methoxy-2-propanamine)
- Chemical name:
- 1-Methoxy-2-propanamine
- Labels:
- 3, 8
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
Components with workplace control parameters
The substances without values are not listed in the occupational exposure regulations for the validity area of this safety data sheet.
Exposure controls
Personal protective equipment
Respiratory protection in case of vapour/aerosol release.
Hand protection:
Chemical resistant protective gloves (EN 374) Suitable materials also with prolonged, direct contact (recommended: protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other manufacturer's directions for use should be observed because of great diversity of types.
Supplementary note: the specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e..g temperature) it must be considered, that the practical useage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Eye protection: Tightly fitting safety goggles (cage goggles) (e.g. EN 166) and face shield.
Body protection: Must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment. Avoid contact with the skin, eyes and clothing. Do not breathe vapour/spray.
Components with workplace control parameters
The substances without values are not listed in the occupational exposure regulations for the validity area of this safety data sheet.
Exposure controls
Personal protective equipment
Respiratory protection in case of vapour/aerosol release.
Hand protection:
Chemical resistant protective gloves (EN 374) Suitable materials also with prolonged, direct contact (recommended: protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other manufacturer's directions for use should be observed because of great diversity of types.
Supplementary note: the specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e..g temperature) it must be considered, that the practical useage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Eye protection: Tightly fitting safety goggles (cage goggles) (e.g. EN 166) and face shield.
Body protection: Must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment. Avoid contact with the skin, eyes and clothing. Do not breathe vapour/spray.
Stability and reactivity
Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
Reacts with acids. Reacts with isocyanates. Reacts with aldehydes. The progress of reaction is exothermic.
Conditions to avoid
Avoid all sources of ignition: head, sparks, open flame
Incompatible materials
Substances to avoid: acids, isocyanates, aldehydes
Hazardous decompositions products
Possible thermal decomposition products: carbon oxides, nitrogen oxides
No hazardous reactions if stored and handled as prescribed/indicated.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
Reacts with acids. Reacts with isocyanates. Reacts with aldehydes. The progress of reaction is exothermic.
Conditions to avoid
Avoid all sources of ignition: head, sparks, open flame
Incompatible materials
Substances to avoid: acids, isocyanates, aldehydes
Hazardous decompositions products
Possible thermal decomposition products: carbon oxides, nitrogen oxides
Disposal considerations
Waste treatment methods
Incinerate in suitable incineration plant, observing local authority regulations.
A waste code in accordance with the European waste catalog (EWC) cannot be specified, due to dependence on the usage.
The waste code in accordance with the European waste catalog (EWC) must be specified in cooperation with disposal agency/manufacturer/ authorities.
Contaminated packaging:
Contaminated packaging should be emptied as far as possible, then it can be passed on for recycling after being thoroughly cleaned.
Incinerate in suitable incineration plant, observing local authority regulations.
A waste code in accordance with the European waste catalog (EWC) cannot be specified, due to dependence on the usage.
The waste code in accordance with the European waste catalog (EWC) must be specified in cooperation with disposal agency/manufacturer/ authorities.
Contaminated packaging:
Contaminated packaging should be emptied as far as possible, then it can be passed on for recycling after being thoroughly cleaned.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
