Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of necessary first-aid measures & Most important symptoms/effects, acute and delayed:

General advice:

Product not completely tested. Take maximum precautions when handling. Take off immediately all contaminated clothing.

Inhalation:

Move patient from contaminated area to fresh air. Oxygen or artificial respiration if needed. Keep under medical surveillance. In case of

problems : Hospitalise.

Skin contact:

Wash immediately, abundantly and thoroughly with soap and water. Get medical attention if irritation develops and persists.

Eye contact:

Wash open eyes immediately, abundantly and thoroughly for at least 15 minutes. Consult an ophthalmologist immediately.

Ingestion:

In case of problems : Consult a doctor. Do NOT induce vomiting. Hospitalise.

Protection of first-aiders:

In case of insufficient ventilation, wear suitable respiratory equipment. Protective suit

Fire-fighting measures

- Suitable extinguishing media: Water spray, Foam, Dry powder, Carbon dioxide (CO2)

- Unsuitable extinguishing media: High volume water jet

Special hazards arising from the substance or mixture: Thermal decomposition giving toxic products

Carbon oxides, Nitrogen oxides, Hydrogen fluoride

Advice for firefighters: Special protective actions for fire-fighters:

Wear self-contained breathing apparatus and protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:

Use personal protective equipment. Ensure adequate ventilation. Prohibit contact with skin and inhalation of dust. In the case of respirable

dust, use self-contained breathing apparatus.

Environmental precautions:Prevent product from entering drains. Do not release into the environment.

Methods and materials for containment and cleaning up:

Recovery: Sweep up to prevent slipping hazard. No sparking tools should be used. Avoid dust formation. Recover the product and place in a dry labelled

container. Keep in suitable, closed containers for disposal.

Elimination: Dispose of in accordance with local regulations

Handling and storage

Precautions for safe handling:

Technical measures/Precautions:

Product not completely tested. Take maximum precautions when handling. Storage and handling precautions applicable to products: Solid.

Dust forming. Forming EXPLOSIVE mixtures with air (in the presence of an ignition source (Spark)). Toxic. Irritant even corrosive. Provide

showers, eye-baths. Provide water supplies near the point of use. Provide electrical earthing of equipment. Provide self-contained breathing

apparatus nearby. Provide appropriate exhaust ventilation at machinery.

Safe handling advice:

Smoking, eating and drinking should be prohibited in the application area. Avoid the formation and deposition of dust. Prohibit all sources of

sparks and ignition - Do not smoke. Avoid accumulation of static charges during transfers in metallic systems. Avoid charging as a dust

shower – risk of product flammability. In case of insufficient ventilation, wear suitable respiratory equipment Keep well away from naked

flames. Store away from heat. At all stages of the operation, do not exceed the temperature at which decomposition into toxic and corrosive

products will occur.

Hygiene measures:

When using do not eat or drink. Prohibit contact with skin and eyes and inhalation of dust (or vapours). Remove and wash contaminated

clothing before re-use.

Conditions for safe storage, including any incompatibilities:

Keep container tightly closed in a dry and well-ventilated place. Store away from moisture and heat to maintain the technical properties of the

product. Keep away from heat and sources of ignition. Do not smoke.

Do not store above: 50 °C

Incompatible products:

Strong oxidizing agents, Acids, Bases

Packaging material:

Recommended: Polyethylene

To be avoided: Metals

Wash hands after handling. Remove contaminated clothing and protective equipment before entering eating areas.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not classified as dangerous in the meaning of transport regulations.Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Not classified as dangerous in the meaning of transport regulations.

Exposure controls / personal protection

Exposure Limit Values (dust)

Source Date Value type Value (ppm) Value (mg/m3) Remarks

ACGIH (US) 02 2012 TWA – 10 Inhalable particles.

ACGIH (US) 02 2012 TWA – 3 Respirable particles.

Exposure controls:

General protective measures: Ensure sufficient air exchange and/or exhaust in work areas

Personal protective equipment:

Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment (effective dust mask)

Hand protection: Protective gloves

Eye/face protection: Safety glasses with side-shields

Skin and body protection: Protective suit

Stability and reactivity

Reactivity & Chemical stability:

The product is stable at normal handling and storage temperatures.

Possibility of hazardous reactions:

In the presence of an ignition source: Dust may form explosive mixture in air.

Conditions to avoid: Temperatures above 50 °C

Store protected from moisture and heat. Remove all sources of ignition.

Incompatible materials to avoid: Acids, Bases, Strong oxidizing agents

Hazardous decomposition products:

Thermal decomposition:Decomposition temperature: 270 °C

Nitrogen oxides (NOx), Carbon oxides, Hydrogen fluoride

Disposal considerations

Disposal of product: Destroy the product by incineration (in accordance with local and national regulations).

Disposal of packaging: Destroy packaging by incineration at an approved waste disposal site. In accordance with local and

national regulations.