Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures

After inhalation: fresh air. Consult a physician.

After skin contact: wash off with plenty of water. Remove contaminated clothing. Consult a physician.

After eye contact: rinse out with plenty of water. Call in ophthalmologist.

After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.

Most important symptoms and effects, both acute and delayed

Allergic reactions, irritant effects, Dermatitis, Cyanosis.

The following applies to ammonium salts in general:

After swallowing: local irritation symptoms, nausea, vomiting, diarrhea.

Systemic effect - after the uptake of very large quantities: drop in blood pressure, collapse, CNS disorders, spasms, narcotic conditions, respiratory paralysis, haemolysis.

Indication of any immediate medical attention and special treatment needed

No information available.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media: water, carbon dioxide, foam, dry powder.

Unsuitable extinguishing media: for this substance/mixture no limitations of extinguishing agents are given.

Special hazards arising from the substance or mixture

Combustible.

In the event of decomposition: danger of explosion.

Risk of dust explosion.

Development of hazardous combustion gases or vapours possible in the event of fire.

Fire may cause evolution of: hydrogen chloride gas, nitrogen oxides, nitrous gases.

Advice for firefighters

Special protective equipment for firefighters

Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.

Further information

Suppress (knock down) gases/vapours/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Advice for non-emergency personnel: avoid substance contact. Avoid inhalation of dusts. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Advice for emergency responders: Protective equipment see section “Exposure controls/personal protection”.

Environmental precautions

Do not empty into drains. Risk of explosion.

Methods and materials for containment and cleaning up

Cover drains. Collect, bind, and pump off spills.

Observe possible material restrictions (see sections “Handling and storage” and “Stability and reactivity”).

Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.

Reference to other sections

Indications about waste treatment see section “Disposal considerations”.

Handling and storage

Precautions for safe handling

Advice on safe handling: Observe label precautions. Work under hood. Do not inhale substance/mixture.

Hygiene measures: Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Conditions for safe storage, including any incompatibilities

Requirements for storage areas and containers: No metal containers.

Storage conditions: Tightly closed and away from sources of ignition and heat. Observe national regulations. Dry. Recommended storage temperature see product label.

Specific end use(s)

Apart from the use as a reagent for analysis, no other specific uses are stipulated.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 2923
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, TOXIC, N.O.S. (HYDROXYLAMMONIUM CHLORIDE)
Special provisions / remarks
Special provisions:
Environmentally hazardous: yes
Special precautions for user: yes
Tunnel restriction code: E

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not relevant
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN 2923
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, TOXIC, N.O.S. (HYDROXYLAMMONIUM CHLORIDE)
Special provisions / remarks
Remarks:
Environmentally hazardous: yes
Special precautions for user: yes

Transport in bulk according to Annex II of MARPOL 73/78 and IBC Code
Not relevant

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 2923
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, TOXIC, N.O.S. (HYDROXYLAMMONIUM CHLORIDE)
Special provisions / remarks
Remarks:
Environmentally hazardous: yes
Special precautions for user: no
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control Parameters

Exposure Controls

Engineering measures: Technical measures and appropriate operations should be given priority over the use of personal protective equipment.

See section “Precautions for safe handling” in “Handling and Storage”.

Individual protection measures

Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.

Eye/face protection: Safety glasses

Hand protection

Full contact

Glove material: nitrile rubber

Glove thickness: 0.11 mm

Break through time: > 480 min

Splash contact

Glove material: nitrile rubber

Glove thickness: 0.11 mm

Break through time: > 480 min

The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact).

The breakthrough times stated above were determined by KCL in laboratory tests according to EN374 with samples of the recommended glove types.

This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Other protective equipment: protective clothing

Respiratory protection:

Required when dusts are generated. Recommended filter type: Filter P 3 (according to DIN 3181) for solid and liquid particles of toxic and very toxic substances.

The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Environmental exposure controls

Do not empty into drains. Risk of explosion.

Stability and reactivity

Reactivity

Explosive

Mechanical sensitivity (friction).

Chemical stability

The product is chemically stable under standard ambient conditions (room temperature).

Possibility of hazardous reactions

Violent reactions possible with: alkaline substances

Possible formation of: hydroxylamine

Risk of explosion with: fire-promoting substances, oxidizing agents.

Conditions to avoid: heating (decomposition)

Incompatible materials: aluminum, copper, zinc, tin

Hazardous decomposition products: in the event of fire see section “Firefighting measures”

Disposal considerations

Waste treatment methods

See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have any further questions.