Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 216-602-3 | CAS number: 1623-08-1
Guidance on Safe Use
Administrative data
First-aid measures
General advice:
- Show this safety data sheet to the doctor in attendance.
- First aider needs to protect himself.
- For effective first-aid, special training / education is needed.
- Place affected clothing in a sealed bag for subsequent decontamination.
- Do not leave the victim unattended.
In case of inhalation:
- Move to fresh air.
- Keep at rest.
- Consult a physician.
In case of skin contact:
- Take off contaminated clothing and shoes immediately.
- Wash off immediately with plenty of water for at least 15 minutes.
- Consult a physician if necessary.
- Wash contaminated clothing before re-use.
In case of eye contact:
- Rinse with running water whilst keeping the eyes wide open (at least 15 minutes)
- Get immediate medical advice/ attention.
In case of ingestion:
- Do NOT induce vomiting.
- Rinse mouth with water.
- Consult a physician if necessary.
Fire-fighting measures
Suitable extinguishing media:
- All extinguishing agents can be used.
- Water
- Foam
- powder
- Carbon dioxide (CO2)
- Sand
Unsuitable extinguishing media:
- None known.
- Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Special hazards arising from the substance or mixture:
- On heating Highly irritating vapours are released.
Special protective equipment for firefighters:
- In the event of fire, wear self-contained breathing apparatus.
- Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing
- For further information refer to section 8 "Exposure controls/personal protection".
Specific fire fighting methods:
- Evacuate personnel to safe areas.
- Cool containers/tanks with water spray.
- Wear suitable protective equipment.
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
- Avoid contact with the skin and the eyes.
- Do not breathe dust.
- Remove all sources of ignition.
- Personal protective equipment
- Wear suitable protective clothing.
- Eye/face protection
- Wear suitable gloves.
- Respirator with a particle filter (EN 143)
- Remove all incompatible materials as quickly as possible
- For further information refer to section 8 "Exposure controls/personal protection".
Environmental precautions:
- Prevent product from entering sewage system.
- Contain the spilled material by bunding.
Methods and materials for containment and cleaning up:
Recovery:
- Recover as much of the product as possible.
- Sweep up and shovel into suitable containers for disposal.
- Carefully recover the remainder by sweeping or vacuuming it up.
- Avoid dust formation.
- Keep in suitable, closed containers for disposal.
Decontamination/cleaning:
- Wash non-recoverable remainder with large amounts of water.
- Recover the cleaning water for subsequent disposal.
Disposal:
- Dispose of in accordance with local regulations.
Handling and storage
Precautions for safe handling:
- Dust extraction (suction).
- Do not heat the product.
- Do not mix with incompatible materials (See list section 10).
- Handle in accordance with good industrial hygiene and safety practice.
- Avoid dust formation.
- Use only in well-ventilated areas.
- Avoid high temperatures.
- Reduce the duration of exposure to the minimum required.
- Do NOT handle without gloves.
- Do NOT handle if hands have any cuts or wounds.
- Avoid any direct contact with the product.
Hygiene measures:
- Use clean, well-maintained personal protection equipment.
- Ensure that eyewash stations and safety showers are close to the workstation location.
- Wash hands before eating, drinking, or smoking.
- When using do not eat, drink or smoke.
- Smoking, eating and drinking should be prohibited in the application area.
- Store personal protection equipment in a clean location away from the work area.
- Shower or bathe at the end of working.
- Wash hands after handling.
- Before reuse, thoroughly clean personal protection equipment
- Emergency equipment immediately accessible, with instructions for use.
Technical measures/Storage conditions:
- Keep containers tightly closed in a dry, cool and well-ventilated place.
- Keep in a dry, cool place.
- Keep in a well-ventilated place.
- Keep away from incompatible materials to be indicated by the manufacturer
- Keep away from open flames, hot surfaces and sources of ignition.
- Do NOT heat the storage container.
- Keep away from: Oxidizing materials.
Packaging material:
- Store in original container.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not regulated
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not regulated
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not regulated
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
1. Technical protection measures
Engineering measures:
- Local exhaust
- Dust must be extracted directly at the point of origin.
- Facilities and equipment easily cleanable.
2. Organisational protection measures:
- The protective equipment must be selected in accordance with current CEN standards and in cooperation with the supplier of the protective equipment.
- Selection of appropriate personal protective equipment should be based on an evaluation of the performance characteristics of the protective equipment relative to the task(s) to be performed, conditions present, duration of use, and the potential hazards and/or risks that may occur during use.
- Always have on hand a first-aid kit, together with proper instructions.
- Use clean, well-maintained personal protection equipment.
- Ensure that eyewash stations and safety showers are close to the workstation location.
- Wash hands before eating, drinking, or smoking.
- When using do not eat, drink or smoke.
- Smoking, eating and drinking should be prohibited in the application area.
- Store personal protection equipment in a clean location away from the work area.
- Shower or bathe at the end of working.
- Wash hands after handling.
- Before reuse, thoroughly clean personal protection equipment
- Emergency equipment immediately accessible, with instructions for use.
3. Hand protection
- Long sleeve gloves
- The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
- Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time.
- Gloves must be inspected prior to use.
4. Skin and Body protection:
- Protective suit
- Boots
- Choose body protection according to the amount and concentration of the dangerous substance at the work place.
6. Eye protection:
- Goggles
7. Respiratory protection:
- In case of liberation of fibres or dust :
- Respirator with a particle filter (EN 143)
Environmental exposure controls:
- Prevent product from entering sewage system.
- Contain the spilled material by bunding.
Stability and reactivity
Reactivity: no data available
Chemical stability
- Stable at room temperature.
- Stable under normal conditions.
Possibility of hazardous reactions: no data available
Conditions to avoid: no data available
Incompatible materials:
- Strong oxidizing agents.
Hazardous decomposition products:
- On combustion or on thermal decomposition (pyrolysis) releases:
- harmful and flammable vapours which may increase the risk of a fire or explosion.
- (Carbon oxides (CO + CO2)).
- PHOSPHINE
- Oxides of phosphorus
Disposal considerations
Waste treatment methods:
Product Disposal:
- Do not dispose of with domestic refuse.
- Avoid release to the environment.
- Dispose of in accordance with local regulations.
- Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point.
Advice on cleaning and disposal of packaging:
- Rinse with an appropriate solvent.
- Allow it to drain thoroughly.
- After recovery of solvent dispose of by special waste incineration.
- Do not enter tanks or containers before they have been cleaned and de-gassed.
- Recycle following cleaning.
- Dispose of contents/container in accordance with local regulation.
- Dispose of in accordance with local regulations.
Measure for waste avoidance or recovery:
- Do not burn, or use a cutting torch on the empty drum.
- Do NOT dispose of untreated packaging with industrial waste.
- Do not dispose of the product at a rubbish tip.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
