Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

4.1 DESCRIPTION OF FIRST AID MEASURES

Eye Contact:

Rinse immediately with plenty of water for at least 15 minutes. Obtain medical attention immediately.

Skin Contact:

Wash immediately with plenty of water and soap. Remove contaminated clothing and shoes without delay. Obtain

medical attention. Do not reuse contaminated clothing without laundering. Destroy or thoroughly clean shoes before

reuse.

Ingestion:

If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything

by mouth to an unconscious person.

Inhalation:

Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.

4.2 MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED

None known.

4.3 INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS

Not applicable.

Fire-fighting measures

5.1 EXTINGUISHING MEDIA

Suitable Extinguishing Media:

Use water spray, alcohol foam, carbon dioxide or dry chemical to extinguish fires. Water stream may be ineffective.

5.2 SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE

Keep containers cool by spraying with water if exposed to fire.

5.3 ADVICE FOR FIREFIGHTERS

Protective Equipment:

Firefighters, and others exposed, wear self-contained breathing apparatus.

Accidental release measures

6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES

Where exposure level is not known, wear approved, positive pressure, self-contained respirator. Where exposure

level is known, wear approved respirator suitable for level of exposure. In addition to the protective clothing/equipment

in Section 8 (Exposure Controls/Personal Protection), wear impermeable boots.

6.2 ENVIRONMENTAL PRECAUTIONS

Avoid release to the environment.

6.3 METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP

Cover spills with some inert absorbent material; sweep up and place in a waste disposal container. Do not flush away

with water. Do not allow spills to enter either drains or waterways. Remove sources of ignition.

6.4 REFERENCES TO OTHER SECTIONS

See Sections 7, 8 and 13 for additional information.

Handling and storage

7.1 PRECAUTIONS FOR SAFE HANDLING

Precautions: Keep away from heat, sparks and open flame. - No smoking. Keep container tightly closed.

Ground/Bond container and receiving equipment. Use explosion-proof electrical, ventilating, lighting and other

equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Use only outdoors or

in a well-ventilated area. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product.

Wear protective gloves/clothing and eye/face protection. Contaminated work clothing should not be allowed out of the

workplace. Avoid release to the environment. Do not breathe vapors or spray mist.

Special Handling Statements: Provide good ventilation of working area (local exhaust ventilation if necessary).

During processing and handling of the product, comply with the indicative occupational exposure limit values. Within

the EEA (EU or Norway) this substance must be handled under strictly controlled conditions. Containers must be

bonded and grounded when pouring or transferring material.

7.2 CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES

Store in a cool, dry, well ventilated place and keep container tightly closed. Areas containing this material should have

fire safe practices and electrical equipment in accordance with applicable regulations and/or guidelines. Standards

are primarily based on the material`s flashpoint, but may also take into account properties such as miscibility with

water or toxicity. All local and national regulations should be followed. Keep away from sources of ignition - refrain

from smoking. Avoid flammable gas mixtures. Take precautionary measures against electrostatic loading - earthing

necessary during loading operations. Vapours may form explosive mixtures with air.

Storage Temperature: Store at < 30 °C

Reason: Quality.

Storage Class (TRGS 510): 3

7.3 SPECIFIC END USE(S)

Refer to Section 1 or Exposure Scenario if applicable.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 2924
Shipping information
Proper shipping name and description:
FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Chemical name:
2-BUTANONE, ALIPHATIC POLYAMINE
Language:
English
Labels:
Flammable liquid
Corrosive
Special provisions / remarks
Special provisions:
Tunnel restriction code: D/E
Remarks:
Comments: Not intended for shipment by inland waterways in tank vessels.

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN 2924
Shipping information
Proper shipping name and description:
FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Chemical name:
2-BUTANONE, ALIPHATIC POLYAMINE
Language:
English
Labels:
Flammable liquid
Corrosive
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN 2924
Shipping information
Proper shipping name and description:
FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Chemical name:
2-BUTANONE, ALIPHATIC POLYAMINE
Labels:
Flammable liquid
Corrosive
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 2924
Shipping information
Proper shipping name and description:
FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Chemical name:
2-BUTANONE, ALIPHATIC POLYAMINE
Labels:
Flammable liquid
Corrosive
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering Measures:

Engineering controls are not usually necessary if good hygiene practices are followed.

Where this material is not used in a closed system, good enclosure and local exhaust ventilation should be provided

to control exposure.

Within the EEA (EU or Norway) this substance must be handled under strictly controlled conditions.

Respiratory Protection:

For operations where inhalation exposure can occur use an approved respirator. Recommendations are listed below.

Other protective respiratory equipment may be used based on user's own risk assessment.

Recommended:

Full Face Mask with organic vapor cartridge, Type A filter (BP >65°C)

Eye protection:

Wear eye/face protection such as chemical splash proof goggles or face shield.

Skin Protection:

Avoid skin contact.

Wear impermeable gloves and suitable protective clothing.

Since this product is absorbed through the skin, care must be taken to prevent skin contact and contamination of

clothing.

Hand protection:

Wear protective gloves. Recommendations are listed below. Other protective materials may be used based on user's

own risk assessment. Barrier creams may help to protect the exposed areas of the skin, they should however not be

applied once exposure has occurred. Replace gloves immediately when torn or any change in appearance

(dimension, color, flexibility etc.) is noticed.

Gloves for repeated or prolonged exposure - non exhaustive list:

Polyethylene Nylon (PE), thickness: > 0.062 mm, break through time: > 480 min

Gloves for short term exposure/splash protection - non exhaustive list:

Nitrile rubber (NBR), thickness: 0.38 mm, break through time: up to 30 min

The chemical resistance depends on the type of product and amount of product on the glove. Therefore gloves need

to be changed when in contact with chemicals.

Not suitable gloves - non exhaustive list:

Natural rubber (NRL), thickness: 0.12 mm

Due to many conditions (e.g. temperature, abrasion) the practical usage of a chemical protective glove in practice

may be much shorter than the permeation time determined through testing. Use PE gloves as under gloves for

difficult situations like for instance: high exposure, unknown composition or unknown properties of the chemicals.

Additional Advice:

Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water. It is recommended that a

shower be taken after completion of workshift especially if significant contact has occurred. Work clothing should then

be laundered prior to reuse. Street clothing should be stored separately from work clothing and protective equipment.

Work clothing and shoes should not be taken home.

Stability and reactivity

10.1 REACTIVITY No information available

10.2 CHEMICAL STABILITY Stable

10.3 POSSIBILITY OF HAZARDOUS REACTIONS

Polymerization: Will not occur

Conditions To Avoid: None known.

10.4 CONDITIONS TO AVOID Avoid exposure to excessive heat, strong acids and alkalis, oxidizing agents, and

open flame. Avoid contact with moist air, water or acids.

10.5 INCOMPATIBLE MATERIALS

moisture/water

10.6 HAZARDOUS DECOMPOSITION PRODUCTS

Amine compounds

Disposal considerations

13.1 WASTE TREATMENT METHODS

The company encourages the recycle and reuse of products and packaging, where possible and permitted.

Product disposal

When recycle or reuse is not possible, the comany recommends that our products, especially when classified as

hazardous, be disposed of by thermal treatment or incineration at approved facilities. All local and national regulations

should be followed. For disposal within the European Community, waste codes according to Directive 2008/98/EC

should be assigned by the user based on the application for which the product was used.

Packaging disposal

Handle contaminated packages in the same way as the product itself. Disposal of emptied and cleaned packaging

must be made in accordance with applicable local and national regulations.

Disposal-relevant information

Do not release directly or indirectly to surface water, ground water, soil or public sewage system.