High temperature calcination products of titanium dioxide, calcium carbonate, calcium fluoride, quartz and antimony oxide containing lewisite and wollastonite

Acute Toxicity: inhalation

Administrative data

Endpoint:

acute toxicity: inhalation

Type of information:

experimental study

Adequacy of study:

key study

Study period:

22 July 2016 - 16 December 2016

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Justification for type of information:

REACH Annex VII column 2 states that testing by the inhalation route is appropriate if exposure of humans via inhalation is likely. Forming insoluble particulate matter, the inhalation route was considered the most appropriate exposure pathway for uverithe.

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2016

Report date:

2016

Materials and methods

Test guideline

Test guideline 1

Qualifier:

according to guideline

Guideline:

OECD Guideline 436 (Acute Inhalation Toxicity: Acute Toxic Class Method)

Version / remarks:

adopted September 7, 2009

Deviations:

no

Test guideline 2

Qualifier:

according to guideline

Guideline:

EU Method B.52 (Acute Inhalation Toxicity - Acute Toxic Class Method)

Version / remarks:

Commission Regulation (EC) No. 260/2014 method B.52 published in the Official Journal of the European Union L81, dated March 19, 2014).

Deviations:

no

GLP compliance:

yes (incl. QA statement)

Test type:

acute toxic class method

Limit test:

yes

Test material

Test material information

Constituent 1

Reference substance name:

antimony trioxide

IUPAC Name:

antimony trioxide

Constituent 2

Reference substance name:

Titanium dioxide

EC Number:

236-675-5

EC Name:

Titanium dioxide

Cas Number:

13463-67-7

Molecular formula:

O2Ti

IUPAC Name:

Titanium(IV) oxide

Constituent 3

Reference substance name:

Calcium oxide

EC Number:

215-138-9

EC Name:

Calcium oxide

Cas Number:

1305-78-8

Molecular formula:

CaO

IUPAC Name:

oxocalcium

Constituent 4

Reference substance name:

Silicon dioxide

EC Number:

231-545-4

EC Name:

Silicon dioxide

Cas Number:

7631-86-9

Molecular formula:

O2Si

IUPAC Name:

dioxosilane

Test material form:

solid: particulate/powder

Specific details on test material used for the study:

SOURCE OF TEST MATERIAL
- Source and lot/batch No. of test material: sponsor batch# 434/08/15
- Purity test date: 21 January 2016
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Composition: Antimony oxide (Sb2O3) 38.60%; Titanium oxide (TiO) 31.15%; Calcium oxide (CaO) 26.67%; Silicon oxide (SiO2): 4.40%; and Fluorine (F-): 1.53%.
- Physical characteristics: Powder
- Storage condition of test material: At ambient temperature (10 - 25°), container kept tightly closed and stored in a dry and well-ventilated place.

Test animals

Species:

rat

Strain:

Crj: CD(SD)

Sex:

male/female

Details on test animals or test system and environmental conditions:

TEST ANIMALS
- Source: Charles River Laboratories, Research Models and Services Germany GmbH, Sandhofer Weg 7, 97633 Sulzfeld, Germany
- Females (if applicable) nulliparous and non-pregnant: yes
- Age at study initiation: males approx. 8 weeks and females approx. 9 weeks
- Weight at study initiation: males (235 - 262 g); females (224 - 255 g)
- Fasting period before study: Feeding was discontinued 16 hours before exposure
- Housing: MAKROLON cages (type III plus)
- Diet: Commercial diet, ssniff R/M-H V1534 ad libitum
- Water: tap water ad libitum
- Acclimation period: At least 5 adaption days

ENVIRONMENTAL CONDITIONS
- Temperature (°C): 22 ± 3°C
- Humidity (%): 55 ± 15%
- Air changes (per hr): Not reported
- Photoperiod (hrs dark / hrs light): 12:12 hours dark/light cycles at 150 lux

IN-LIFE DATES: From: To: not reported

Administration / exposure

Route of administration:

inhalation: dust

Type of inhalation exposure:

nose only

Vehicle:

air

Mass median aerodynamic diameter (MMAD):

1.723 µm

Geometric standard deviation (GSD):

2.26

Remark on MMAD/GSD:

The generated dust particles had a mass median aerodynamic diameter (MMAD) of 1.723 µm, as determined with a cascade impactor. The Geometic Standard Deviation (GSD) of the MMAD was 2.26. The measured MMAD/GSD are as expected, considering the particle size determined prior to experimentation (Diameter (D) percentage cumulative size: D10% = 0.65 µm; D50% = 1.80 µm; D90% = 4.45 µm).

Details on inhalation exposure:

GENERATION OF TEST ATMOSPHERE / CHAMBER DESCRIPTION
- Exposure apparatus: RHEMA-LABORTECHNIK dynamic inhalation apparatus (6579 Hofheim/Taunus, Germany)
- Exposure chamber volume: 28.5 L
- Method of holding animals in test chamber: Animals held in pyrex tubes at edge of the chamber in radial position for nose-only exposure.
- Source and rate of air: The generator was fed with compressed air (5.0 bar) from a compressor (ALUP Kompressorenfabrik, 73257 Köngen, Germany). At the bottom of the exposure chamber, the air was sucked off at a lower flow rate, in order to produce a homogenous distribution and positive pressure in the exposure chamber (inflow 900 L/h, outflow 800 L/h). A manometer and air-flor meter (ROTA Yokogawa GmbH & Co. KG), were used to control supply and exhaust, respectively. Flow rates were checked hourly.
- System of generating particulates/aerosols: rotating brush dust generator
- Method of particle size determination: Cascade impactor 6.0 L/min (Article No. 700800-CI-060), TSE Systems GmbH, 61352 Bad Homburg, Germany)
- Temperature, humidity, pressure in air chamber: Temperature (21.1°C ± 0.1°C) and humidity (59.5% ± 0.2%) were measured once every hour with a climate control monitor (testo 175-HZ data logger).

TEST ATMOSPHERE
- Brief description of analytical method used: The dust from the exposure chamber was drawn through the cascade impactor for 1 minute at a constant flow rate of 5 L/min. The slides were removed from the impactor and weighed on an analytical balance (SARTORIUS, type 1601 004, precision 0.1 mg).
- Samples taken from breathing zone: yes. Dust samples were taken once every hour during the exposure. For that purpose, a probe was placed close to the animals’ noses and air was drawn through the air sample filter at a constant flow of air of 5 L/min for 1 minute. The filters were weighed before and after sampling.

TEST ATMOSPHERE (if not tabulated)
- Particle size distribution: 1.723
- MMAD (Mass median aerodynamic diameter) / GSD (Geometric st. dev.): 2.26

Analytical verification of test atmosphere concentrations:

yes

Duration of exposure:

4 h

Remarks on duration:

As stipulated in OECD Guidelines 436

Concentrations:

5 mg/L

No. of animals per sex per dose:

3 males and 3 females (n = 6)

Control animals:

no

Details on study design:

- Duration of observation period following administration: 14 days
- Frequency of observations and weighing: During and following exposure, clinical examinations were made daily. Individual weights of animals were determined once during the acclimatisation period, before the exposure on test day 1, on test days 2, 4, 8 and 15. Changes in weight were calculated and recorded at 1 day, and at the end of the test.
- Necropsy of survivors performed: yes. Necropsy of all animals was carried out and all gross pathological changes were recoded for each animal, with particular attention to any changes in the respiratory tract.
- Other examinations performed: clinical signs, body weight,organ weights, histopathology, other: Cageside observations included, but were not limited to: changes in the skin and fur, eyes, mucous membranes, respiratory, circulatory, autonomic and central nervous system, as well as somatomotor activity and behaviour pattern. Particular attention was directed to observation of tremor, convulsions, salivation, diarrhoea, lethargy, sleep and coma.

Results and discussion

Effect levels

Key result

Sex:

male/female

Dose descriptor:

LC50

Effect level:

> 5.07 mg/L air (analytical)

Based on:

test mat.

Exp. duration:

4 h

Remarks on result:

not determinable due to absence of adverse toxic effects

Mortality:

No mortality was observed

Clinical signs:

other: Under the present test conditions, a 4-hour inhalation exposure to Uverithe at a concentration of 5.07 mg/L air induced slight dyspnoea until 3 hours post exposure in all rats. This effect was considered to be an overall clinical sign of general toxicity

Body weight:

No influence in body weight gain was noted.

Gross pathology:

No pathological findings were observed at necropsy in any of the male or female rats (n=6).

Applicant's summary and conclusion

Interpretation of results:

GHS criteria not met

Conclusions:

Under the present test conditions, the LC50 value for rats following inhalation of Uverithe for 4 hours was determined as >5.07 mg/L air. According to the Globally Harmonised Classification System (GHS), the test item does not require classification for acute inhalation toxicity.

Executive summary:

CD/Crl(SD) rats (3 male; 3 female) were exposed to an aerosol dust of Uverithe at a gravimetrically determined concentration of 5.07±0.02 mg/L air for 4 hours by inhalation, via nose-only exposure. The dust particles had a Mass Median Aerodynamic Diameter (MMAD) or 1.723 µm and a Geometic Standard Deviation (GSD) or 2.26. Under the present test conditions, 4-hour inhalation exposure induced slight dyspnoea until 3 hours post exposure in all rats. No other clinical signs of toxicity, mortality or pathological changes at necropsy, were observed in the treated rats.

Under the present test conditions, the LC50 value for rats following inhalation of Uverithe for 4 hours was determined as >5.07 mg/L air. Conducted according to OECD 436 and GLP, the study was considered reliable without restriction (Klimisch 1).