Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove patient to fresh air.  Seek medical attention.

Emergency measure - Eyes: Rinse eyes thoroughly for at least 15 minutes with clean

water.  Seek medical attention.

Emergency measure - Skin: Remove contaminated clothing (launder before re-use).  Rinse

affected area thoroughly for at least 15 minutes.  If

irritation persists seek medical attention.

Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water fog or foam may be used.

Product arising from burning: Products of combustion may contain oxides of carbon together

with some soot.

Product determined by test: N

Protective equipment: Full protective clothing and a self-contained breathing

apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Wear suitable protective clothing (see 2.3.1). Material

(liquid or solid) is readily dispersible in water which may

result in an effluent discharge with elevated colour and

suspended solids. Prevent material from entering sewers or

other waterways. Absorb spillages of dispersions with a

suitable inert material (eg. sand or soil).  Carefully

transfer the spillage to suitably labelled waste containers,

or use a sealed industrial vacuum machine.  Clean the

spillage area with water and detergent.

Dispose of waste material by incineration in accordance with

local regulations.

Handling and storage

Handling: Prevent exposure to high temperature and flames.  Prevent

exposure to strong oxidizers and reducing agents.  Keep

container tightly sealed to prevent moisture/vapor exchange.

The substance should be stored, handled and used in

conditions of good industrial hygiene and in conformity with

any local regulations in order to avoid exposure by

ingestion and skin contact.

Engineering controls are necessary to reduce exposure to the


When exposure cannot be prevented or adequately controlled,

appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate

international or national standards ie. chemical protective

gloves (Standard prEN374), chemical resistant clothing

(Standard EN368), and eye protection (Standard prEN166).

When necessary, appropriate respiratory protection should be


Storage: Store in tightly sealed containers in a dry well-ventilated


Packaging of the substance and or preparation: 5-50 ml plastic inkjet printer ink cartridge, packaged in


0.5 litre, 1 litre plastic bottles, 10 litre plastic

containers, or 5, 15 or 55 gallon high density polypropylene


Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Transport: Avoid crushing the containers. In the event of a spillage,
observe the Safety Data Sheet and the warning labels on the
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported

Chemical reaction with water: None reported

Dust explosion: Not applicable for the imported aqueous dispersion.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery for recycling is not possible.

Industry - Possibility of neutralisation: Not applicable.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with

inert material (eg sand or soil) may be disposed in

accordance with local regulations.  When selecting a

disposal alternative, landfill is not recommended.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration in

accordance with local regulations.  Waste gas treatment to

remove oxides of nitrogen should be fitted.

Industry - Possibility of destruction - water purification: Not recommended.

Public at large - Possibility of recovery/recycling: The substance will only enter the public domain in the form

of articles that can be disposed of in accordance with

applicable regulations.