Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 608-927-8 | CAS number: 339530-91-5
Guidance on Safe Use
Administrative data
First-aid measures
General information: Instantly remove any clothing soiled by the product.
After inhalation: Supply fresh air and call for doctor for safety reasons. In case of unconsciousness bring patient into stable side position for transport.
After skin contact: Instantly wash with water and soap and rinse thoroughly. Seek medical treatment.
After eye contact: Rinse opened eye for several minutes (10 - 15) under running water. Then consult doctor.
After swallowing: Call a doctor immediately.
Most important symptoms and effects, both acute and delayed: No further relevant information available.
Indication of any immediate medical attention and special treatment needed: No specific antidote available. Treat symptomatically and supportively.
Fire-fighting measures
Extinguishing media:
- Suitable extinguishing agents: CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam.
- For safety reasons unsuitable extinguishing agents: Do not use a heavy water stream.
Special hazards arising from the substance or mixture:
- Formation of toxic gases is possible during heating or in case of fire. Can be released in case of fire: Hydrogen fluoride (HF), Sulphur dioxide (SO2), Carbon monoxide (CO) and carbon dioxide (CO2)
Advice for firefighters:
- Protective equipment: Wear self-contained breathing apparatus. Do not inhale explosion gases or combustion gases. Wear full protective suit.
Additional information: Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
- Wear protective equipment (described in section 8). Keep unprotected persons away.
- Avoid causing dust.
- Do not inhale dust.
- Avoid contact with substance.
Environmental precautions:
- Do not allow product to reach sewage system or water bodies.
- Do not allow to enter drainage system, surface or ground water.
Methods and material for containment and cleaning up:
- Collect mechanically.
- Dispose of contaminated material as waste according to official regulations.
Handling and storage
Precautions for safe handling
- Prevent formation of dust.
- Provide suction extractors if dust is formed.
Information about protection against explosions and fires: No special measures required.
Conditions for safe storage, including any incompatibilities
- Further information about storage conditions: Store in cool, dry conditions in well sealed containers.
- Storage class VCI class 13
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- not classified
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- not classified
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- not classified
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- not classified
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Personal protective equipment
The usual precautionary measures should be adhered to general rules for handling chemicals.
Wash hands during breaks and at the end of the work.
Breathing equipment: Use breathing protection only if dust is formed. Recommended filter device for short term use: Filter P3
Protection of hands: Protective gloves (EN 374). The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer.
Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Safety glasses
Body protection: Protective work clothing.
Stability and reactivity
No decomposition if used according to specifications.
No dangerous reactions known.
Hazardous decomposition products: Sulphur dioxide, Hydrogen fluoride, Carbon monoxide and carbon dioxide
Disposal considerations
Disposal must be made according to official regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
