Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice inhalation: If breathed in, move person into fresh air. Artificial respiration and/or oxygen
may be necessary. Consult a physician.

Skin contact: Take off all contaminated clothing immediately. Wash off with soap and water.
If skin irritation persists, call a physician.

Eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a
physician.

Ingestion: Do NOT induce vomiting. Call a physician immediately.

Notes to physician: Treat symptomically.

Fire-fighting measures

Suitable extinguishing media : Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable extinguishing media: water, foam.

Specific hazards: In fire conditions, toxic decomposition products may be formed. Rapid uncotnrolled polymerization may occur during a fire.

Special protective equipment for firefighters: wear self-contained breathing apparatus and protective suit.

Further information: Isolate area. Evacuate personnel and keep upwind of fire. Cool containers/tanks with water spray. Shut off source of fuel, if possible and without risk.

Accidental release measures

NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with clean-up.
Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up.

Safeguards (Personnel) : Wear personal protective equipment.

Environmental precautions : Prevent further leakage or spillage.

Spill Cleanup: Remove all sources of ignition. Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. Wear personal protective equipment.

Accidental Release Measures : Dispose of in accordance with local regulations.

Handling and storage

Handling (Personnel) : Avoid contact with skin, eyes and clothing. Avoid breathing mist or dried down material. Wash clothing after use.

Handling (Physical Aspects) : Provide adequate precautions, such as electrical grounding, or inert atmospheres when material is used in the presence of flammable materials to prevent ignition.

Storage: Keep away from heat, sparks and flames. Keep refrigerated. Keep container tightly closed in a dry and well-ventilated place. If frozen, thaw at room temperature between 15-30°C (59-86°F) and roll drum through several revolutions every 8-12 hours to redistribute inhibitor until completely thawed. Do not store for more than one(1) week at these temperatures. Consume monomer or return to refrigerated storage.

Storage temperature : 8 - 12 °C (46 - 54 °F)

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
3082
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (4-Ethenyl phenol acetate)
Labels:
Labelling No. 9
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
3082
Shipping information
Proper shipping name and description:
Environmentally hazardous substance, liquid, n.o.s. (4-Ethenyl phenol acetate)
Labels:
Labelling No. 9
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Not regulated as a hazardous material by DOT. Discrepancies between hazard classification and transport classification(s) assessments are a result of differences in the regulatory texts.

Exposure controls / personal protection

Engineering controls : Ensure adequate ventilation.

Personal protective equipment:
- Respiratory protection: Where there is potential for airborne exposures in excess of applicable limits, wear NIOSH approved respiratory protection.

-Hand protection: Material: Double layer gloves, polyvinylchloride/nitrile rubber. Permeation rate: 90 min

-Eye protection: Wear coverall chemical splash goggles and face shield when the possibility exists for eye and face contact due to splashing or spraying of material.

-Skin and body protection: Chemical-resistant boots. Complete suit protecting against chemicals.

-Protective measures: Eyewash facility and safety shower should be available.

Stability and reactivity

Possibility of hazardous reactions: polymerisation; Polymerization will not occur at ambient temperatures in the presence of inhibitors. Chemically stable, but will polymerize rapidly and exothermically in the presence of free-radical initiators.

Conditions to avoid : Elevated temperature

Incompatible materials : Oxidizing agents Free radical sources, Iron, Copper, Bases, Strong acids

Hazardous decomposition products: Hazardous decomposition products: Acetic acid , Phenol, Carbon monoxide

Disposal considerations

Waste disposal methods -Product: In accordance with local and national regulations. Do not dispose of waste into sewer. Must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities.

Waste disposal methods - container: Do not reuse empty container. Dispose of container properly. Empty containers may contain hazardous residue.