Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

4.1. Description of first aid measures

General information

Remove soiled or soaked clothing immediately

After inhalation

When inhaled remove to fresh air and seek medical aid.

After contact with skin

In case of contact with skin wash off immediately with soap and water

After contact with eyes

In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice

After ingestion

If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label

4.2. Most important symptoms and effects, both acute and delayed

Symptoms

No symptoms known currently.

Hazards

No hazards known at this time.

4.3. Indication of any immediate medical attention and special treatment needed

Treatment

Treat symptomatically.

Fire-fighting measures

5.1. Extinguishing media

Suitable extinguishing media

water spray jet

foam

carbon dioxide

dry powder

5.2. Special hazards arising from the substance or mixture

In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)

Nitrous gases (NOx)

5.3. Advice for firefighters

Special protective equipment for firefighting

Use self-contained breathing apparatus

Further information

Wear protective equipment.

Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Wear suitable personal protective equipment.

6.2. Environmental precautions

Do not allow to enter drains or waterways

6.3. Methods and material for containment and cleaning up

Pick up with absorbent material (eg sand, sawdust). Rinse away rest with water

Handling and storage

7.1. Precautions for safe handling

Advice on safe handling

No special measures necessary if stored and handled as prescribed.

Hygiene measures

Wash hands before breaks and after work.

Use barrier skin cream.

Remove soiled or soaked clothing immediately and clean thoroughly before using again.

Advice on protection against fire and explosion

Observe the general rules of industrial fire protection

7.2. Conditions for safe storage, including any incompatibilities

Further information on storage conditions

Keep container tightly closed in a cool, well-ventilated place, open and handle carefully.

7.3. Specific end use(s)

No further recommendations.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not restricted
Shippingopen allclose all
Labels:
not restricted
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not restricted
Shippingopen allclose all
Labels:
not restricted
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not restricted
Shipping information
Proper shipping name and description:
not restricted
Chemical name:
not restricted
Labels:
not restricted
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not restricted
Shipping information
Proper shipping name and description:
not restricted
Chemical name:
not restricted
Labels:
not restricted
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code (International
Bulk Chemicals Code)
No transport as bulk according IBC - Code.

Exposure controls / personal protection

8.1. Control parameters

Exposure limit values

Exposure limit values are not available.

DNEL/DMEL values

DNEL/DMEL values are not available.

PNEC values

PNEC values are not available.

8.2. Exposure controls

General protective measures

Avoid contact with skin

Avoid contact with eyes

Hand protection : For long-term exposure:

Butyl rubber gloves.

Minimum breakthrough time / gloves : 480 min

Minimum thickness / gloves 0,7 mm

For short-term exposure (splash protection):

Nitrile rubber gloves.

Minimum breakthrough time / gloves : 30 min

Minimum thickness / gloves 0,4 mm

These types of protective gloves are offered by various

manufacturers. Please note the manufacturers´ detailed

statements, especially about the minimum thickness and the

minimum breakthrough time. Consider also the particular

working conditions under which the gloves are being used.

Eye protection : safety glasses

Stability and reactivity

10.1. Reactivity

See section 10.3. "Possibility of hazardous reactions"

10.2. Chemical stability

Under normal conditions the product is stable.

10.3. Possibility of hazardous reactions

No hazardous reactions when stored and handled according to prescribed instructions.

10.4. Conditions to avoid

None known.

10.5. Incompatible materials

not known

10.6. Hazardous decomposition products

When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

13.1. Waste treatment methods

Product

In accordance with local authority regulations, take to special waste incineration plant

Uncleaned packaging

Packaging that cannot be cleaned should be disposed of as product waste