Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 434-760-3 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove to fresh air. Restore breathing. Keep warm and quiet
and seek medical attention.
Emergency measure - Eyes: Flush eyes with a large amount of water for at least 15
minutes. Seek medical attention.
Emergency measure - Skin: Wash affected areas thoroughly with soap and water. Seek
medical attention if irritation persists.
Emergency measure - Ingestion: Seek immediate medical attention.
Fire-fighting measures
Recommended extinguishing agent: carbon dioxide, dry chemical or foam
Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon and nitrogen
oxides). However, there is no experimental evidence to
support the anticipated combustion products.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.
Absorb spillages of solutions with a suitable inert material
(eg sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original containers.
Clean the spillage area with water and detergent.
Waste material should be recovered where possible.
Handling and storage
Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipmemt should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard EN374
Chemical resistant clothing to Standard EN368
Eye protection to Standard EN166
When necessary appropriate respiratory protection should be
used. e.g. an organic vapour mask conforming to EN405 FFA1.
The standards mentioned above should be regarded as a
minimum.
Storage: Store in a cool, dry, well-ventilated area.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: 20kg plastic pail, 50kg plastic or steel drum.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: None
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None reported.
Chemical reaction with water: None reported.
Dust explosion: Not applicable.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Recovery from any spillages or accidental discharge of
formulations containing the substance should be encouraged
where economically or technically feasible.
The substance may be lost during the recycling of
formulations and can be subsequently disposed of by landfill
or incineration at a licensed waste disposal site.
Industry - Possibility of neutralisation: No chemical treatment is practicable to neutralise the
hazardous health properties.
Industry - Possibility of destruction: controlled discharge: The substance may be disposed of by landfill at an
authorised site in accordance with local regulations, where
possible, following recycling of formulations containing the
substance.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon and
nitrogen oxides) could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment.
Public at large - Possibility of recovery/recycling: Not applicable. The substance will not enter the public
domain.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
