Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 464-390-8 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove victim to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give
oxygen. Seek immediate medical attention.
Emergency measure - Eyes: Flush eyes with plenty of water for at least 15 minutes.
Seek medical attention.
Emergency measure - Skin: Wash skin with soap and plenty of water for at least 15
minutes. Remove contaminated clothing and launder before re-
use. Seek medical attention.
Emergency measure - Ingestion: If victim is conscious and alert give water or milk to
drink. Seek immediate medical attention.
Fire-fighting measures
Recommended extinguishing agent: Water fog, dry chemical, foam or carbon dioxide.
Extinguishing Media not to be used: None.
Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg oxides of carbon, sulfur
and nitrogen, plus chlorine and sodium containing
compounds). However, there is no experimental evidence to
support the anticipated combustion products.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus should be worn.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Do not release to drain.
Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.00.
Methods for cleaning up:
Avoid dust formation by damping down with water.
Transfer the spillage to waste containers labeled in the
same way as the original containers. Clean the spillage
area with water and detergent.
Disposal considerations:
Waste from Residues: Dispose of by incineration or landfill
in accordance with local regulations. Stack gases should be
scrubbed.
Contaminated packaging: Dispose of by incineration or
landfill in accordance with local regulations.
Handling and storage
Handling: Precautions: The substance should be handled under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid unnecessary
exposure.
Technical Measures: Engineering controls such as local
exhaust ventilation should be used in order to reduce
exposure to the substance.
Personal protection:
Personal Protective Equipment: The provision of personal
protective equipment and the need to provide engineering
control measures should be decided upon by the user as part
of a formal exposure risk assessment. Based upon the
available toxicological information the protective measures
described below should be regarded as a minimum.
Respiratory Protection: Based upon current information and
in the absence of occupational exposure limits the use of a
dust mask to a minimum standard of EN149 FFP1 is
recommended.
Hand Protection: Chemical protective gloves to a Standard
EN374 should be provided. Usage periods should not exceed
the breakthrough times for the chemical stated by the
manufacturer of the glove.
Eye Protection: Eye protection should be used when handling
the substance. The protection should be capable of giving
chemical protection as classified in EN166.
Skin Protection: Handling of the material should be done
wearing chemical protective clothing suitable for protection
against the chemical as classified by Standard EN368.
Storage: Store in a cool, dry, well-ventilated area. Keep containers
tightly closed when not in use.
Avoid contact with strong acids, strong bases and strong
oxidizing agents.
Packaging of the substance and or preparation: 25 kg cardboard boxes.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport: Not regulated.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Precautions: The substance should be handled under conditions of good industrial hygiene and in conformity with any local regulations in order to avoid unnecessary exposure.
Technical Measures: Engineering controls such as local exhaust ventilation should be used in order to reduce exposure to the substance.
Personal protection:
Personal Protective Equipment: The provision of personal protective equipment and the need to provide engineering control measures should be decided upon by the user as part of a formal exposure risk assessment. Based upon the available toxicological information the protective measures described below should be regarded as a minimum.
Respiratory Protection: Based upon current information and in the absence of occupational exposure limits the use of a dust mask to a minimum standard of EN149 FFP1 is recommended.
Hand Protection: Chemical protective gloves to a Standard EN374 should be provided. Usage periods should not exceed the breakthrough times for the chemical stated by the manufacturer of the glove.
Eye Protection: Eye protection should be used when handling the substance. The protection should be capable of giving chemical protection as classified in EN166.
Skin Protection: Handling of the material should be done wearing chemical protective clothing suitable for protection
against the chemical as classified by Standard EN368.
Stability and reactivity
Danger other than fire: None known.
Chemical reaction with water: None.
Dust explosion: Likely.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: [610]: Recovery, not specified.
Industry - Possibility of neutralisation: [630]: Neutralisation, not specified.
Industry - Possibility of destruction: controlled discharge: [641]: Removal by controlled discharge to a waste water
treatment plant.
Industry - Possibility of destruction - incineration: [662]: Incinerate, high temperature - long burn.
Industry - Possibility of destruction - water purification: -
Industry - Possibility of destruction - other: [671]: Pyrolysis.
Public at large - Possibility of recovery/recycling: [610]: Recovery, not specified.
Public at large - Possibility of neutralisation: [630]: Neutralisation, not specified.
Public at large - Possibility of destruction: controlled discharge: [640]: Removal, not specified.
Public at large - Possibility of destruction - incineration: [660]: Incinerate, not specified.
Public at large - Possibility of destruction - water purification: -
Public at large - Possibility of destruction - others: Not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
