Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 478-210-0
CAS number: 69901-75-3
Get medical attention.
NOTES TO THE PHYSICIAN
No recommendation given, but first aid may still be required in the case of accidental exposure, inhalation or ingestion of this chemical. If in doubt, get medical attention promptly.
Move into fresh air and keep at rest. Get medical attention if any discomfort continues.
Rinse mouth thoroughly. If a large amount is swallowed/in the case of discomfort, get medical attention.
Wash skin thoroughly with soap and water.
Rinse thoroughly with plenty of water, keeping the eyelid open. In the case of persistent discomfort, get medical attention.
Water spray, foam, dry powder or carbon dioxide.
SPECIAL FIRE-FIGHTING PROCEDURES
During all fire-fighting activities, wear appropriate protective equipment, including self-contained breathing apparatus.
UNUSUAL FIRE & EXPLOSION HAZARDS
No unusual fire or explosion hazards noted.
Formation of toxic gases is possible during heating or fire. May include oxides of carbon and nitrogen.
PROTECTIVE MEASURES IN FIRE
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Follow precautions for safe handling described under 'Expsoure controls/personal protection'
Avoid release to the environment.
SPILL CLEAN UP METHODS
Avoid dust formation. Pick up mechanically and collect in suitable containers. Dispose of material in accordance with local regulations. Ventilate area and wash spill site after material pick up is complete.
Read and follow manufacturer’s recommendations:
The substance will only be used by trained personnel. Measures are in place to minimise workplace exposure levels. These include the use of personal protective equipment and engineering controls, such as local exhaust ventilation.
Keep containers tightly closed and secure from falling down. Store in a cool, dry place at a temperature of 2-8 degrees C.
OCCUPATIONAL EXPOSURE CONTROLS
Use engineering controls to reduce air contamination to a permissible level.
Local exhaust ventilation extraction should be present during charging and sampling should be carried out in a ventilated, self-contained cabinet.
Wear air supplied respiratory protection.
PVC gloves are recommended.
Goggles/face shield are recommended.
No specific hygiene procedures noted, but good personal hygiene practices are always advisable, especially when working with chemicals.
Wear appropriate protective clothing to prevent skin contact including disposable coverall, boots and hard hat.
ENVIRONMENTAL EXPOSURE CONTROLS
Ensure site procedures for material handling and storage are in place to limit environmental exposure.
Stable under normal conditions of use.
CONDITIONS TO AVOID:
MATERIALS TO AVOID
HAZARDOUS DECOMPOSITION PRODUCTS
By fire, toxic gases (CO, CO2, NOx) may be formed.
When handling waste, consideration should be made to the safety precautions applying to handling of the product.
Dispose of waste in accordance with all applicable laws and regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again