Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate

Endpoint summary

Description of key information

Skin irritation

The dermal irritation potential of target chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) was assessedin various experimental studies which were conducted on rabbits and rats for target chemicalDisodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) and its structurally similar read across substances[4-[[4-anilino-1-naphthyl][4-(dimethylamino)phenyl] methylene]cyclohexa-2,5-dien-1-ylidene]dimethylammonium acetate (CAS No. 83803-79-6) and Disodium 4-hydroxy-3-[(4-sulphonatonaphthyl)azo] naphthalenesulphonate (3567-69-9). The predicted data usingQSAR toolbox andhas also been compared with the experimental data.Based on the available data for the target and read across substances and applying the weight of evidence approach, it can be concluded that chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) is unable to cause skin irritation and thus considered as not irritating. Comparing the above annotations with the criteria of CLP regulation, it can be classified under the category “Not Classified”.

 

Eye irritation

An ocular irritation potential of target chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) was assessedin various experimental studies which were conducted on rabbits for target chemicalDisodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) andits structurally similar read across substance Acid Red 18 (CAS No: 2611-82-7) and functionally similar read across substances Basic violet 1 (CAS No: 8007-87-3). The predicted data usingQSAR toolboxhas also been compared with the experimental data.Based on the available data for the target and read across substances and applying the weight of evidence approach, it can be concluded that chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) is unable to cause eye damage and thus can be considered as not irritating. Comparing the above annotations with the criteria of CLP regulation, it can be classified under the category “Not Classified”.

Key value for chemical safety assessment

Skin irritation / corrosion

Link to relevant study records

Reference

Endpoint:

skin irritation: in vivo

Type of information:

(Q)SAR

Adequacy of study:

weight of evidence

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

results derived from a valid (Q)SAR model and falling into its applicability domain, with limited documentation / justification

Justification for type of information:

Data is from OECD QSAR toolbox version 3.3 and QMRF report has been attached

Qualifier:

according to guideline

Guideline:

other: Estimated data

Principles of method if other than guideline:

Prediction is done using QSAR Toolbox version 3.3

GLP compliance:

not specified

Specific details on test material used for the study:

- Name of test material (IUPAC name): Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate
- Common name: Methyl blue, Acid blue 93
- Molecular formula: C37H26N3Na2O9S3
- Molecular weight: 800.8182 g/mol
- Smiles notation: c1cc(ccc1C(=C2C=CC(=[NH+]c3ccc(cc3)S(=O)(=O)[O-])C=C2)c4ccc(cc4)Nc5ccc(cc5)S(=O)(=O)[O-])Nc6ccc(cc6)S(=O)(=O)O.[Na+].[Na+]
- InChl: 1S/C37H29N3O9S3.2Na/c41-50(42,43)34-19-13-31(14-20-34)38-28-7-1-25(2-8-28)37(26-3-9-29(10-4-26)39-32-15-21-35(22-16-32)51(44,45)46)27-5-11-30(12-6-27)40-33-17-23-36(24-18-33)52(47,48)49;;/h1-24,38-39H,(H,41,42,43)(H,44,45,46)(H,47,48,49);;/q;2*+1/p-1
- Substance type: Organic
- Physical state: Solid

Species:

rabbit

Strain:

New Zealand White

Details on test animals or test system and environmental conditions:

No data available

Type of coverage:

occlusive

Preparation of test site:

clipped

Vehicle:

not specified

Controls:

not specified

Amount / concentration applied:

No data available

Duration of treatment / exposure:

24 hours

Observation period:

72 hours

Number of animals:

3

Details on study design:

No data available

Irritation parameter:

overall irritation score

Basis:

mean

Time point:

72 h

Reversibility:

not specified

Remarks on result:

no indication of irritation

Irritant / corrosive response data:

No skin irritation was observed.

Estimation method: Takes mode value from the 5 nearest neighbours
Domain  logical expression:Result: In Domain

((((((((((((((("a" or "b" or "c" or "d" )  and ("e" and ( not "f") )  )  and ("g" and ( not "h") )  )  and ("i" and ( not "j") )  )  and ("k" and ( not "l") )  )  and ("m" and ( not "n") )  )  and ("o" and ( not "p") )  )  and ("q" and ( not "r") )  )  and ("s" and ( not "t") )  )  and ("u" and ( not "v") )  )  and ("w" and ( not "x") )  )  and "y" )  and "z" )  and "aa" )  and ("ab" and "ac" )  )

Domain logical expression index: "a"

Referential boundary: The target chemical should be classified as Alkene OR Ammonium salt OR Aromatic amine OR Aryl OR Sulfonic acid by Organic Functional groups ONLY

Domain logical expression index: "b"

Referential boundary: The target chemical should be classified as Alkene OR Ammonium salt OR Aromatic amine OR Aryl OR Overlapping groups OR Sulfonic acid by Organic Functional groups (nested) ONLY

Domain logical expression index: "c"

Referential boundary: The target chemical should be classified as Aliphatic Nitrogen, two aromatic attach [-N-] OR Aromatic Carbon [C] OR Miscellaneous sulfide (=S) or oxide (=O) OR Nitrogen, hydrogen attach {v+5} OR Nitrogen, two or tree olefinic attach [>N-] OR Olefinic carbon [=CH- or =C<] OR Ortho-substitutes on N=C<, aromatic OR Suflur {v+4} or {v+6} OR Sulfonate, aromatic attach [-SO2-O] by Organic functional groups (US EPA) ONLY

Domain logical expression index: "d"

Referential boundary: The target chemical should be classified as Amine OR Anion OR Aromatic compound OR Cation OR Secondary amine OR Secondary aromatic amine OR Sulfonic acid derivative by Organic functional groups, Norbert Haider (checkmol) ONLY

Domain logical expression index: "e"

Referential boundary: The target chemical should be classified as No alert found by DNA binding by OECD

Domain logical expression index: "f"

Referential boundary: The target chemical should be classified as Michael addition OR Michael addition >> P450 Mediated Activation to Quinones and Quinone-type Chemicals OR Michael addition >> P450 Mediated Activation to Quinones and Quinone-type Chemicals >> Arenes OR Michael addition >> P450 Mediated Activation to Quinones and Quinone-type Chemicals >> Polycyclic (PAHs) and heterocyclic (HACs) aromatic hydrocarbons-Michael addition OR Michael addition >> Polarised Alkenes-Michael addition OR Michael addition >> Polarised Alkenes-Michael addition >> Alpha, beta- unsaturated ketones OR SN1 OR SN1 >> Carbenium Ion Formation OR SN1 >> Carbenium Ion Formation >> Polycyclic (PAHs) and heterocyclic (HACs) aromatic hydrocarbons-SN1 OR SN1 >> Iminium Ion Formation OR SN1 >> Iminium Ion Formation >> Aliphatic tertiary amines OR SN1 >> Nitrenium Ion formation OR SN1 >> Nitrenium Ion formation >> Tertiary aromatic amine by DNA binding by OECD

Domain logical expression index: "g"

Referential boundary: The target chemical should be classified as No alert found by DNA binding by OASIS v.1.3

Domain logical expression index: "h"

Referential boundary: The target chemical should be classified as AN2 OR AN2 >> Nucleophilic addition to alpha, beta-unsaturated carbonyl compounds OR AN2 >> Nucleophilic addition to alpha, beta-unsaturated carbonyl compounds >> alpha, beta-Unsaturated Aldehydes OR AN2 >> Schiff base formation OR AN2 >> Schiff base formation >> alpha, beta-Unsaturated Aldehydes OR SN2 OR SN2 >> Direct acting epoxides formed after metabolic activation OR SN2 >> Direct acting epoxides formed after metabolic activation >> Quinoline Derivatives OR SN2 >> SN2 at an activated carbon atom OR SN2 >> SN2 at an activated carbon atom >> Quinoline Derivatives by DNA binding by OASIS v.1.3

Domain logical expression index: "i"

Referential boundary: The target chemical should be classified as Not known precedent reproductive and developmental toxic potential by DART scheme v.1.0

Domain logical expression index: "j"

Referential boundary: The target chemical should be classified as Inorganic chemical OR Known precedent reproductive and developmental toxic potential OR Metal atoms were identified OR Metals (1a) OR Not covered by current version of the decision tree OR Organophosphorus compounds (1b) OR Toluene and small alkyl toluene derivatives (8a) by DART scheme v.1.0

Domain logical expression index: "k"

Referential boundary: The target chemical should be classified as Inclusion rules not met by Skin irritation/corrosion Inclusion rules by BfR

Domain logical expression index: "l"

Referential boundary: The target chemical should be classified as Esters of organic sulfonic or sulfuric esters OR Ketones OR Quaternary organic ammonium compounds OR Sulfonic acids or their salts by Skin irritation/corrosion Inclusion rules by BfR

Domain logical expression index: "m"

Referential boundary: The target chemical should be classified as (!Undefined)Group All Lipid Solubility < 0.01 g/kg AND (!Undefined)Group CNS Surface Tension > 62 mN/m AND Group All log Kow < -3.1 AND Group All Melting Point > 200 C AND Group CNS log Kow < 0.5 AND Group CNS log Kow < -2 AND Group CNS Melting Point > 120 C AND Group CNS Melting Point > 50 C AND Group CNS Molecular Weight > 620 g/mol by Skin irritation/corrosion Exclusion rules by BfR

Domain logical expression index: "n"

Referential boundary: The target chemical should be classified as (!Undefined)Group All log Kow < -3.1 OR (!Undefined)Group All log Kow > 9 OR (!Undefined)Group All Melting Point > 200 C OR (!Undefined)Group C Surface Tension > 62 mN/m OR (!Undefined)Group CN Lipid Solubility < 0.4 g/kg OR Exclusion rules not met OR Group All log Kow > 9 OR Group C Aqueous Solubility < 0.0001 g/L OR Group C Melting Point > 55 C OR Group C Vapour Pressure < 0.0001 Pa OR Group CN Aqueous Solubility < 0.0001 g/L OR Group CN Aqueous Solubility < 0.1 g/L OR Group CN log Kow > 4.5 OR Group CN log Kow > 5.5 OR Group CN Melting Point > 180 C OR Group CN Molecular Weight > 290 g/mol OR Group CN Molecular Weight > 540 g/mol OR Group CN Vapour Pressure < 0.001 Pa by Skin irritation/corrosion Exclusion rules by BfR

Domain logical expression index: "o"

Referential boundary: The target chemical should be classified as No alert found by Protein binding alerts for skin sensitization by OASIS v1.3

Domain logical expression index: "p"

Referential boundary: The target chemical should be classified as Acylation OR Acylation >> Direct acylation involving a leaving group OR Acylation >> Direct acylation involving a leaving group >> (Thio)Acyl and (thio)carbamoyl halides and cyanides  by Protein binding alerts for skin sensitization by OASIS v1.3

Domain logical expression index: "q"

Referential boundary: The target chemical should be classified as Inclusion rules not met by Eye irritation/corrosion Inclusion rules by BfR

Domain logical expression index: "r"

Referential boundary: The target chemical should be classified as Organic sulphonic salts by Eye irritation/corrosion Inclusion rules by BfR

Domain logical expression index: "s"

Referential boundary: The target chemical should be classified as (!Undefined)Group All Lipid Solubility < 0.01 g/kg AND Group All log Kow < -3.1 AND Group All Melting Point > 200 C AND Group All Molecular Weight > 650 g/mol AND Group CNS log Kow < -2 AND Group CNS Melting Point > 200 C AND Group CNS Melting Point > 50 C AND Group CNS Molecular Weight > 620 g/mol by Eye irritation/corrosion Exclusion rules by BfR

Domain logical expression index: "t"

Referential boundary: The target chemical should be classified as Group All Aqueous Solubility < 0.000005 g/L OR Group All Aqueous Solubility < 0.00002 g/L OR Group CNS Aqueous Solubility < 0.006 g/l OR Group CNS log Kow > 1.5 OR Group CNS log Kow > 3.6 by Eye irritation/corrosion Exclusion rules by BfR

Domain logical expression index: "u"

Referential boundary: The target chemical should be classified as Alkali Earth AND Non-Metals by Groups of elements

Domain logical expression index: "v"

Referential boundary: The target chemical should be classified as Halogens OR Metalloids OR Transition Metals by Groups of elements

Domain logical expression index: "w"

Referential boundary: The target chemical should be classified as Group 1 - Alkali Earth Li,Na,K,Rb,Cs,Fr AND Group 14 - Carbon C AND Group 15 - Nitrogen N AND Group 16 - Oxygen O AND Group 16 - Sulfur S by Chemical elements

Domain logical expression index: "x"

Referential boundary: The target chemical should be classified as Group 15 - Phosphorus P by Chemical elements

Domain logical expression index: "y"

Similarity boundary:Target: O=S(=O)(c1ccccc1Nc1ccc(C(=C2C=CC(=N{+}c3ccccc3S(=O)(=O)O{-}.[Na]{+})C=C2)c2ccc(Nc3ccccc3S(=O)(=O)O{-})cc2)cc1)O{-}.[Na]{+}
Threshold=30%,
Dice(Atom centered fragments)
Atom type; Count H attached; Hybridization

Domain logical expression index: "z"

Referential boundary: The target chemical should be classified as Aliphatic Nitrogen, two aromatic attach [-N-] AND Aromatic Carbon [C] AND Miscellaneous sulfide (=S) or oxide (=O) AND Nitrogen, hydrogen attach {v+5} AND Nitrogen, two or tree olefinic attach [>N-] AND Olefinic carbon [=CH- or =C<] AND Ortho-substitutes on N=C<, aromatic AND Suflur {v+4} or {v+6} AND Sulfonate, aromatic attach [-SO2-O] by Organic functional groups (US EPA) ONLY

Domain logical expression index: "aa"

Referential boundary: The target chemical should be classified as Aliphatic Nitrogen, two aromatic attach [-N-] AND Aromatic Carbon [C] AND Miscellaneous sulfide (=S) or oxide (=O) AND Nitrogen, hydrogen attach {v+5} AND Nitrogen, two or tree olefinic attach [>N-] AND Olefinic carbon [=CH- or =C<] AND Ortho-substitutes on N=C<, aromatic AND Suflur {v+4} or {v+6} AND Sulfonate, aromatic attach [-SO2-O] by Organic functional groups (US EPA) ONLY

Domain logical expression index: "ab"

Parametric boundary:The target chemical should have a value of log Kow which is >= -4.65

Domain logical expression index: "ac"

Parametric boundary:The target chemical should have a value of log Kow which is <= -2.38

Interpretation of results:

other: not irritating

Conclusions:

The chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) was estimated to be not irritating to the skin of New Zealand White rabbits. Based on the estimated result Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) can be considered to be not irritating to skin and can be classified under the category ˋ Not Classified’ as per CLP regulation.

Executive summary:

The dermal irritation potential of Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) was estimated using OECD QSAR toolbox version 3.4 with logPow as the primary descriptor. The chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) was estimated to be not irritating to the skin of New Zealand White rabbits. Based on the estimated result Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) can be considered to be not irritating to skin and can be classified under the category ˋ Not Classified’ as per CLP regulation.

Endpoint conclusion

Endpoint conclusion:

no adverse effect observed (not irritating)

Eye irritation

Link to relevant study records

Reference

Endpoint:

eye irritation: in vivo

Type of information:

(Q)SAR

Adequacy of study:

weight of evidence

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

results derived from a valid (Q)SAR model and falling into its applicability domain, with limited documentation / justification

Justification for type of information:

Data is from OECD QSAR toolbox version 3.3 and QMRF report has been attached

Qualifier:

according to guideline

Guideline:

other: estimated data

Principles of method if other than guideline:

Prediction is done using QSAR Toolbox version 3.3

GLP compliance:

not specified

Specific details on test material used for the study:

- Name of test material (IUPAC name): Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate
- Common name: Methyl blue, Acid blue 93
- Molecular formula: C37H26N3Na2O9S3
- Molecular weight: 800.8182 g/mol
- Smiles notation: c1cc(ccc1C(=C2C=CC(=[NH+]c3ccc(cc3)S(=O)(=O)[O-])C=C2)c4ccc(cc4)Nc5ccc(cc5)S(=O)(=O)[O-])Nc6ccc(cc6)S(=O)(=O)O.[Na+].[Na+]
- InChl: 1S/C37H29N3O9S3.2Na/c41-50(42,43)34-19-13-31(14-20-34)38-28-7-1-25(2-8-28)37(26-3-9-29(10-4-26)39-32-15-21-35(22-16-32)51(44,45)46)27-5-11-30(12-6-27)40-33-17-23-36(24-18-33)52(47,48)49;;/h1-24,38-39H,(H,41,42,43)(H,44,45,46)(H,47,48,49);;/q;2*+1/p-1
- Substance type: Organic
- Physical state: Solid

Species:

rabbit

Strain:

New Zealand White

Details on test animals or tissues and environmental conditions:

No data available

Vehicle:

not specified

Controls:

not specified

Amount / concentration applied:

No data available

Duration of treatment / exposure:

single application

Observation period (in vivo):

72 hours

Number of animals or in vitro replicates:

3

Details on study design:

No data available

Irritation parameter:

overall irritation score

Basis:

mean

Time point:

72 h

Reversibility:

not specified

Remarks on result:

no indication of irritation

Irritant / corrosive response data:

No eye irritation was observed.

Estimation method: Takes mode value from the 7 nearest neighbours
Domain  logical expression:Result: In Domain

(((((((((((((("a" or "b" or "c" or "d" )  and ("e" and ( not "f") )  )  and ("g" and ( not "h") )  )  and ("i" and ( not "j") )  )  and ("k" and ( not "l") )  )  and ("m" and ( not "n") )  )  and ("o" and ( not "p") )  )  and ("q" and ( not "r") )  )  and ("s" and ( not "t") )  )  and "u" )  and "v" )  and "w" )  and "x" )  and ("y" and "z" )  )

Domain logical expression index: "a"

Referential boundary: The target chemical should be classified as Alkene OR Ammonium salt OR Aromatic amine OR Aryl OR Sulfonic acid by Organic Functional groups ONLY

Domain logical expression index: "b"

Referential boundary: The target chemical should be classified as Alkene OR Ammonium salt OR Aromatic amine OR Aryl OR Overlapping groups OR Sulfonic acid by Organic Functional groups (nested) ONLY

Domain logical expression index: "c"

Referential boundary: The target chemical should be classified as Aliphatic Nitrogen, two aromatic attach [-N-] OR Aromatic Carbon [C] OR Miscellaneous sulfide (=S) or oxide (=O) OR Nitrogen, hydrogen attach {v+5} OR Nitrogen, two or tree olefinic attach [>N-] OR Olefinic carbon [=CH- or =C<] OR Ortho-substitutes on N=C<, aromatic OR Suflur {v+4} or {v+6} OR Sulfonate, aromatic attach [-SO2-O] by Organic functional groups (US EPA) ONLY

Domain logical expression index: "d"

Referential boundary: The target chemical should be classified as Amine OR Anion OR Aromatic compound OR Cation OR Secondary amine OR Secondary aromatic amine OR Sulfonic acid derivative by Organic functional groups, Norbert Haider (checkmol) ONLY

Domain logical expression index: "e"

Referential boundary: The target chemical should be classified as No alert found by DNA binding by OASIS v.1.3

Domain logical expression index: "f"

Referential boundary: The target chemical should be classified as AN2 OR AN2 >> Nucleophilic addition to alpha, beta-unsaturated carbonyl compounds OR AN2 >> Nucleophilic addition to alpha, beta-unsaturated carbonyl compounds >> alpha, beta-Unsaturated Aldehydes OR AN2 >> Schiff base formation OR AN2 >> Schiff base formation >> alpha, beta-Unsaturated Aldehydes OR Michael addition OR Michael addition >> Quinone type compounds OR Michael addition >> Quinone type compounds >> Quinone methides OR Radical OR Radical >> ROS formation after GSH depletion OR Radical >> ROS formation after GSH depletion >> Quinone methides OR SN1 OR SN1 >> Alkylation after metabolically formed carbenium ion species OR SN1 >> Alkylation after metabolically formed carbenium ion species >> Polycyclic Aromatic Hydrocarbon Derivatives OR SN2 OR SN2 >> Alkylation, direct acting epoxides and related OR SN2 >> Alkylation, direct acting epoxides and related >> Epoxides and Aziridines OR SN2 >> Alkylation, direct acting epoxides and related after P450-mediated metabolic activation OR SN2 >> Alkylation, direct acting epoxides and related after P450-mediated metabolic activation >> Polycyclic Aromatic Hydrocarbon Derivatives OR SN2 >> Direct acting epoxides formed after metabolic activation OR SN2 >> Direct acting epoxides formed after metabolic activation >> Quinoline Derivatives OR SN2 >> SN2 at an activated carbon atom OR SN2 >> SN2 at an activated carbon atom >> Quinoline Derivatives by DNA binding by OASIS v.1.3

Domain logical expression index: "g"

Referential boundary: The target chemical should be classified as No alert found by DNA binding by OECD

Domain logical expression index: "h"

Referential boundary: The target chemical should be classified as Michael addition OR Michael addition >> P450 Mediated Activation to Quinones and Quinone-type Chemicals OR Michael addition >> P450 Mediated Activation to Quinones and Quinone-type Chemicals >> Arenes OR Michael addition >> P450 Mediated Activation to Quinones and Quinone-type Chemicals >> Polycyclic (PAHs) and heterocyclic (HACs) aromatic hydrocarbons-Michael addition OR SN1 OR SN1 >> Iminium Ion Formation OR SN1 >> Iminium Ion Formation >> Aliphatic tertiary amines OR SN1 >> Nitrenium Ion formation OR SN1 >> Nitrenium Ion formation >> Tertiary aromatic amine by DNA binding by OECD

Domain logical expression index: "i"

Referential boundary: The target chemical should be classified as No alert found by Protein binding by OASIS v1.3

Domain logical expression index: "j"

Referential boundary: The target chemical should be classified as Acylation OR Acylation >> Direct acylation involving a leaving group OR Acylation >> Direct acylation involving a leaving group >> (Thio)Acyl and (thio)carbamoyl halides and cyanides  OR Michael Addition OR Michael Addition >> Michael addition on conjugated systems with electron withdrawing group OR Michael Addition >> Michael addition on conjugated systems with electron withdrawing group >> alpha,beta-Carbonyl compounds with polarized double bonds  OR Michael Addition >> Polarised Alkenes OR Michael Addition >> Polarised Alkenes >> Polarised Alkene - alkenyl pyridines, pyrazines, pyrimidines or triazines  OR Nucleophilic addition OR Nucleophilic addition >> Addition to carbon-hetero double bonds OR Nucleophilic addition >> Addition to carbon-hetero double bonds >> Ketones OR SN2 OR SN2 >> Interchange reaction with sulphur containing compounds OR SN2 >> Interchange reaction with sulphur containing compounds >> Thiols and disulfide compounds  by Protein binding by OASIS v1.3

Domain logical expression index: "k"

Referential boundary: The target chemical should be classified as Not possible to classify according to these rules (GSH) by Protein binding potency

Domain logical expression index: "l"

Referential boundary: The target chemical should be classified as Highly reactive (GSH) OR Highly reactive (GSH) >> 3-Alken-2-ones (MA) by Protein binding potency

Domain logical expression index: "m"

Referential boundary: The target chemical should be classified as (!Undefined)Group All Lipid Solubility < 0.01 g/kg AND Group All log Kow < -3.1 AND Group All Melting Point > 200 C AND Group All Molecular Weight > 650 g/mol AND Group CNS log Kow < -2 AND Group CNS Melting Point > 200 C AND Group CNS Melting Point > 50 C AND Group CNS Molecular Weight > 620 g/mol by Eye irritation/corrosion Exclusion rules by BfR

Domain logical expression index: "n"

Referential boundary: The target chemical should be classified as (!Undefined)Group All Aqueous Solubility < 0.000005 g/L OR (!Undefined)Group All Aqueous Solubility < 0.00002 g/L OR (!Undefined)Group All log Kow < -3.1 OR (!Undefined)Group All log Kow > 9 OR (!Undefined)Group All Melting Point > 200 C OR (!Undefined)Group CN Lipid Solubility < 0.4 g/kg OR Exclusion rules not met OR Group All Aqueous Solubility < 0.000005 g/L OR Group All Aqueous Solubility < 0.00002 g/L OR Group All log Kow > 9 OR Group C Aqueous Solubility < 0.0001 g/L OR Group C Aqueous Solubility < 0.0005 g/L OR Group C Melting Point > 55 C OR Group CN Aqueous Solubility < 0.1 g/L OR Group CN log Kow > 4.5 OR Group CN Molecular Weight > 290 g/mol OR Group CNS Aqueous Solubility < 0.006 g/l OR Group CNS log Kow > 1.5 OR Group CNS log Kow > 3.6 by Eye irritation/corrosion Exclusion rules by BfR

Domain logical expression index: "o"

Referential boundary: The target chemical should be classified as Alkali Earth AND Non-Metals by Groups of elements

Domain logical expression index: "p"

Referential boundary: The target chemical should be classified as Alkaline Earth OR Halogens OR Metalloids OR Metals OR Transition Metals by Groups of elements

Domain logical expression index: "q"

Referential boundary: The target chemical should be classified as Group 1 - Alkali Earth Li,Na,K,Rb,Cs,Fr AND Group 14 - Carbon C AND Group 15 - Nitrogen N AND Group 16 - Oxygen O AND Group 16 - Sulfur S by Chemical elements

Domain logical expression index: "r"

Referential boundary: The target chemical should be classified as Group 15 - Phosphorus P by Chemical elements

Domain logical expression index: "s"

Referential boundary: The target chemical should be classified as Not categorized by Repeated dose (HESS)

Domain logical expression index: "t"

Referential boundary: The target chemical should be classified as 3-Methylcholantrene (Hepatotoxicity) Alert OR Aliphatic nitriles (Hepatotoxicity) Rank B OR Aromatic hydrocarbons (Liver enzyme induction) Rank C OR Benzene/ Naphthalene sulfonic acids (Less susceptible) Rank C OR Tamoxifen (Hepatotoxicity) Alert by Repeated dose (HESS)

Domain logical expression index: "u"

Similarity boundary:Target: O=S(=O)(c1ccccc1Nc1ccc(C(=C2C=CC(=N{+}c3ccccc3S(=O)(=O)O{-}.[Na]{+})C=C2)c2ccc(Nc3ccccc3S(=O)(=O)O{-})cc2)cc1)O{-}.[Na]{+}
Threshold=30%,
Dice(Atom centered fragments)
Atom type; Count H attached; Hybridization

Domain logical expression index: "v"

Referential boundary: The target chemical should be classified as Amine AND Anion AND Aromatic compound AND Cation AND Secondary amine AND Secondary aromatic amine AND Sulfonic acid derivative by Organic functional groups, Norbert Haider (checkmol) ONLY

Domain logical expression index: "w"

Referential boundary: The target chemical should be classified as Amine AND Anion AND Aromatic compound AND Cation AND Secondary amine AND Secondary aromatic amine AND Sulfonic acid derivative by Organic functional groups, Norbert Haider (checkmol) ONLY

Domain logical expression index: "x"

Referential boundary: The target chemical should be classified as Aliphatic Nitrogen, two aromatic attach [-N-] AND Aromatic Carbon [C] AND Miscellaneous sulfide (=S) or oxide (=O) AND Nitrogen, hydrogen attach {v+5} AND Nitrogen, two or tree olefinic attach [>N-] AND Olefinic carbon [=CH- or =C<] AND Ortho-substitutes on N=C<, aromatic AND Suflur {v+4} or {v+6} AND Sulfonate, aromatic attach [-SO2-O] by Organic functional groups (US EPA) ONLY

Domain logical expression index: "y"

Parametric boundary:The target chemical should have a value of log Kow which is >= -4.27

Domain logical expression index: "z"

Parametric boundary:The target chemical should have a value of log Kow which is <= -2.16

Interpretation of results:

other: not irritating

Conclusions:

The chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) was estimated to be not irritating into the eyes of New Zealand White rabbits. Based on the estimated result Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) can be considered to be not irritating to eye.

Executive summary:

The ocular irritation potential of Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  estimated using OECD QSAR toolbox version 3.4 with logPow as the primary descriptor. The chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) was estimated to be not irritating into the eyes of New Zealand White rabbits. Based on the estimated result Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) can be considered to be not irritating to eye and can be classified under the category ˋ Not Classified’ as per CLP regulation.

Endpoint conclusion

Endpoint conclusion:

no adverse effect observed (not irritating)

Respiratory irritation

Endpoint conclusion

Endpoint conclusion:

no study available

Additional information

Skin irritation:

Various studieshas been investigated for the test chemicalDisodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  to observe the potential for dermal irritation to a greater or lesser extent. The studies are based on in vivo experiments in rabbits and rats for target chemicalDisodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  and its structurally similar read across substances[4-[[4-anilino-1-naphthyl][4-(dimethylamino)phenyl] methylene]cyclohexa-2,5-dien-1-ylidene]dimethylammonium acetate (CAS No. 83803-79-6) and Disodium 4-hydroxy-3-[(4-sulphonatonaphthyl)azo] naphthalenesulphonate (3567-69-9).The predicted data using the OECD QSAR toolbox and Danish QSAR databasehas also been compared with the experimental data and summarized as below;

 

In a prediction done by SSS (2017) using the OECD QSAR toolbox with log kow as the primary descriptor, the skin irritation potential was estimated for test chemicalDisodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) . The chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  is estimated to be not irritating to skin of New Zealand White rabbits.

 

According to Danish QSAR database , the skin irritation effects were estimated by using four different models i.e, Battery, Leadscope, SciQSAR and CASE Ultra for Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) . Based on estimation, no skin irritation reactions were observed in rabbits. Therefore, Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) was considered to be not irritating.

 

The above results were further supported by the experimental studies designed and conducted by Sustainability Support Services (Europe) AB, 2017 to determine the dermal reaction profile of two read across chemicals [4-[[4-anilino-1-naphthyl][4-(dimethylamino)phenyl] methylene]cyclohexa-2,5-dien-1-ylidene]dimethylammonium acetate (CAS No. 83803-79-6) and Disodium 4-hydroxy-3-[(4-sulphonatonaphthyl)azo] naphthalenesulphonate (3567-69-9) in Sprague Dawley rats. Each study was performed as per OECD Guidelines 402 and complying to the GLP procedures. In each study, ten rats (5 male and 5 female) were used for conducting dermal irritation /corrosion study.  The test item [4-[[4-anilino-1-naphthyl][4-(dimethylamino)phenyl] methylene]cyclohexa-2,5-dien-1-ylidene]dimethylammonium acetate (CAS No. 83803-79-6) was applied to shorn skin of 5 male and 5 female animals at 2000 mg/kg body weight. Administration of the test item at 2000 mg/kg did not result in any skin reaction at the site of application during the study period of 14 days. Also, the erythema and edema score of rats was calculated as 0. Administration of the test item did not result in any signs of toxicity and mortality during the study period of 14 days. Animals exhibited normal body weight gain through the study period of 14 days. Gross pathological examination did not reveal any abnormalities attributable to the treatment. Hence, it was concluded that the chemicals [4-[[4-anilino-1-naphthyl][4-(dimethylamino)phenyl] methylene]cyclohexa-2,5-dien-1-ylidene]dimethylammonium acetate (CAS No. 83803-79-6) and Disodium 4-hydroxy-3-[(4-sulphonatonaphthyl)azo] naphthalenesulphonate (3567-69-9) were Non-Irritating to the skin of Sprague Dawley rats under the experimental conditions tested.

 

Thus on the basis of available data for thetarget chemicalDisodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  and its structurally similar read across substances[4-[[4-anilino-1-naphthyl][4-(dimethylamino)phenyl] methylene]cyclohexa-2,5-dien-1-ylidene]dimethylammonium acetate (CAS No. 83803-79-6) and Disodium 4-hydroxy-3-[(4-sulphonatonaphthyl)azo] naphthalenesulphonate (3567-69-9),it can be concluded thatchemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  is unable to cause skin irritation and considered as not irritating. Comparing the above annotations with the criteria of CLP regulation, it can be classified under the category “Not Classified”.

 

 

Eye irritation:

In different studies,the test chemicalDisodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  has been investigated for potential for ocular irritationto a greater or lesser extent. The studies are based on in vivo experiments in rabbits for target chemicalDisodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) and itsstructurally similar read across substanceAcid Red 18 (CAS No: 2611-82-7)and functionally similar read across substanceBasic violet 1 (CAS No: 8007-87-3).The predicted data using the OECD QSAR toolbox has also been compared with the experimental data and summarized as below;

 

 

In a prediction done by SSS (2017) using the OECD QSAR toolbox with log kow as the primary descriptor, the eye irritation potential was estimated for test chemicalDisodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) . The chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  is estimated to be not irritating to eye of New Zealand White rabbits.

 

The Scientific Committee On Cosmetic Products And Non-Food Products (SCCNFP) {The Scientific Committee On Cosmetic Products And Non-Food Products (SCCNFP), last updated 23 April 2004} assessed an ocular irritation potential of read across chemical Acid Red 18 (CAS No: 2611-82-7) by determining the Cytotoxicity in the neutral red uptake assay (NRU) on human keratinocytes with the modification that human keratinocytes of the HaCaT cell line were used. The treatment was performed in serum-free culture medium. Doses from 681 – 10000 μg/ml [1% in water] were applied together with appropriate controls. Two independent NRU assays with identical doses were performed. No NRU-50 value could be determined from the cytotoxicity curves as the viability was still 61% in the first assay and 70% in the second, so the NRU-50 was reported to be > 10000 μg/ml. Hence, Acid red 18 can be considered not irritating to Human Keratinocytes in the neutral red uptake assay.

 

The above results were further supported by the experimental study reported by Commission of the European Communities {Directorate-General Environment, Consumer Protection and Nuclear Safety- Commission of the European Communities- Brussels Luxembourg, 1988} for read across chemical Basic Violet 1 (CAS no: 8004-87-3). No eye ocular lesions were observed when the rabbits were tested at0.1% aqueous solution of test substance. Hence the chemical Basic Violet 1 (CAS no: 8004-87-3) was considered to be not irritating to the rabbits’ eye.

 

Thus on the basis of available data for thetarget chemicalDisodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  andits structurally similar read across substance Acid Red 18 (CAS No: 2611-82-7) and functionally similar read across substances Basic violet 1 (CAS No: 8007-87-3),it can be concluded thatchemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  is unable to cause eye irritation and considered as not irritating. Comparing the above annotations with the criteria of CLP regulation, it can be classified under the category “Not Classified”.

 

Justification for classification or non-classification

The skin and eye irritation potential of test chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  and its structurally similar read across substanceswere observed in various studies. The results obtained from these studies indicate that the chemical Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4) is unlikely to cause skin and eye irritation. Hence Disodium [[4-[bis[4-[(sulphonatophenyl)amino]phenyl]methylene]cyclohexa-2,5-dien-1-ylidene]amino]benzenesulphonate (CAS No: 28983-56-4)  can be classified under the category “Not Classified” for skin and eye as per CLP.