Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General: Take off immediately all contaminated clothing. Wash clothing before reuse.
Eye contact: Rinse immediately with plenty of water.
Skin contact: Wash immediately with plenty of water. Use soap if available.
Inhalation: Remove patient to fresh air. If breathing is difficult give oxygen.
Ingestion: Immediate first aid is not likely to be required. Obtain medical advice.

Fire-fighting measures

Extinguishing media: Water spray, foam, dry chemical, or carbon dioxide
Exposure hazards: None known
Combustion products: carbon dioxide, carbon monoxide (CO), soot, smoke, hydrocarbons
Protective equipment: Firefighters, and others exposed, wear self-contained breathing apparatus. Equipment should be thoroughly decontaminated after use.

Accidental release measures

Personal precautions:
Use personal protection recommended in section 8 of the Safety Data Sheet
Respiratory protection: Avoid breathing vapour or mist. Use approved respiratory protection equipment (full facepiece recommended) when airborne exposure limits are exceeded. If used, full facepiece replaces the need for face shield and/or chemical goggles.
Hand protection: Suitable materials : PVC, nitrile (rubber).
Skin protection: Wear suitable protective clothing. Wear full protective clothing if exposed to splashes.

Environmental precautions: Keep out of drains and water courses.

Methods for cleaning up: Contain large spills with dikes and transfer the material to appropriate containers for reclamation or disposal. Absorb remaining material or small spills with an inert material and then place in a chemical waste container. Flush spill area with water.

Handling and storage

Handling: Good industrial practice in housekeeping and personal hygiene should be followed.
Engineering measures: Provide natural or mechanical ventilation to control exposure levels below airborne exposure limits. If practical, use local mechanical exhaust ventilation at sources of air contamination such as processing equipment.
Storage: Keep in a cool, dry, well ventilated place. Stable under normal conditions of handling and storage.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

ACGIH Handbook Threshold Limit Values for Chemical Substances and Physical Agents
Occupational Exposure Limit
Type of limit: TLV (US) 4.9 mg/m3

Stability and reactivity

Disposal considerations