Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 266-021-4 | CAS number: 65996-87-4 The residue obtained from coal tar oil by an alkaline wash such as aqueous sodium hydroxide after the removal of crude coal tar acids. Composed primarily of naphthalenes and aromatic nitrogen bases.
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Administrative data
First-aid measures
. Instantly remove any clothing soiled by the product.
. Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
. In case of irregular breathing or respiratory arrest provide artificial respiration.
After inhalation
. In case of unconsciousness bring patient into stable side position for transport.
. Supply fresh air or oxygen; call for doctor.
After skin contact
. Instantly rinse with water.
. Rinse with ethanoic acid 8% and plenty of water.
. Seek medical treatment.
After eye contact
. Rinse opened eye for several minutes under running water.
. Seek medical treatment.
After swallowing
. Rinse out mouth and then drink plenty of water.
. Administer medicinal carbon
. Seek medical treatment.
Fire-fighting measures
. CO2, extinguishing powder or water jet. Fight larger fire with foam.
For safety reasons unsuitable extinguishing agents
. Water with a full water jet.
Special hazards caused by the material, its products of combustion or resulting gases:
. Can be released in case of fire
. Nitrogen oxides (NOx)
. Carbon monoxide (CO)
Protective equipment:
. Do not inhale explosion gases or combustion gases.
. Wear self-contained breathing apparatus.
Accidental release measures
. Wear protective equipment. Keep unprotected persons away.
Measures for environmental protection:
. Dilute with much water.
Measures for cleaning/collecting:
. Dispose of contaminated material as waste according to item in the section "Disposal considerations".
. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders).
. Ensure adequate ventilation.
Handling and storage
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor or Manufacturer / Downstream User of the Registrant’s intermediate.
Handling
Information for safe handling:
. Ensure good ventilation/exhaustion at the workplace.
Information about protection against explosions and fires:
. Keep ignition sources away - Do not smoke.
. Protect against electrostatic charges.
Storage
Requirements to be met by storerooms and containers:
. No special requirements.
Information about storage in one common storage facility:
. Store away from oxidizing agents.
Further information about storage conditions:
. Keep container tightly sealed.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor or Manufacturer / Downstream User of the Registrant’s intermediate.
Additional information about design of technical systems:
. No further data; see section "Handling and Storage".
Components with limit values that require monitoring at the workplace:
95-13-6 indene
. WEL () Short-term value: 72 mg/m³, 15 ppm
. Long-term value: 48 mg/m³, 10 ppm
108-88-3 toluene
. WEL () Short-term value: 384 mg/m³, 100 ppm
. Long-term value: 191 mg/m³, 50 ppm
. Sk
1330-20-7 xylene, mixed isomers
. WEL () Short-term value: 441 mg/m³, 100 ppm
. Long-term value: 220 mg/m³, 50 ppm
. Sk; BMGV
62-53-3 aniline
. WEL () Long-term value: 4 mg/m³, 1 ppm
. Sk
71-43-2 benzene
. WEL () Long-term value: 1 ppm
. Carc; Sk
100-42-5 styrene
. WEL () Short-term value: 1080 mg/m³, 250 ppm
. Long-term value: 430 mg/m³, 100 ppm
110-86-1 pyridine
. WEL () Short-term value: 33 mg/m³, 10 ppm
. Long-term value: 16 mg/m³, 5 ppm
Personal protective equipment
General protective and hygienic measures
. Keep away from foodstuffs, beverages and food.
. Take off immediately all contaminated clothing
. Wash hands during breaks and at the end of the work.
. Store protective clothing separately.
. Avoid contact with the eyes and skin.
Breathing equipment:
. In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air.
Protection of hands:
. Only use chemical-protective gloves with CE-labelling of category III (EN 374).
Material of gloves
. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material
. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
For the permanent contact in work areas without heightened risk of injury (e.g. Laboratory) gloves made of the following material are suitable:
. Butyl rubber, BR
. eg.: Gloves of Fa. KCL, www.KCL.de (sitemap): Butoject (Art,-Nr. 898, Level 5, >240min)
As protection from splashes gloves made of the following materials are suitable:
. Nitril rubber,NBR
. e.g. oneway gloves fa. KCl www.KCL.de(sitemap): Dermatril (Art.-No. 740)
Eye protection:
. Tightly sealed safety glasses.
. Gauze goggles
Body protection:
. Protective work clothing.
Stability and reactivity
. No decomposition.
Materials to be avoided:
. -
Dangerous reactions
. No dangerous reactions known
Dangerous products of decomposition:
. Nitrous vitriol gases
Disposal considerations
Recommendation
. Remove according to local authority recommendations, e.g. convey to a suitable incinerator.
European waste catalogue
. The waste code classification is to be carried out according to the European Waste Catalogue (EWC) specifically for each branch of industry and each type of process.
Uncleaned packagings:
Recommendation:
. Disposal must be made according to official regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.