Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 847-971-4 | CAS number: 2363126-59-2
Flammability
Administrative data
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2020-05-05 til 2020-05-21
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 020
- Report date:
- 2020
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Manganese-(II)-hexacyanomanganate (II) sodium salts
- EC Number:
- 847-971-4
- Cas Number:
- 2363126-59-2
- Molecular formula:
- NaxMny[Mn(CN)6]z X = 1.2-1.4; Y = 1.0; Z = 0.8-0.85
- IUPAC Name:
- Manganese-(II)-hexacyanomanganate (II) sodium salts
- Reference substance name:
- Water
- EC Number:
- 231-791-2
- EC Name:
- Water
- Cas Number:
- 7732-18-5
- Molecular formula:
- H2O
- IUPAC Name:
- Oxidane
- Test material form:
- solid: particulate/powder
Constituent 1
impurity 1
Results and discussion
Flammable solids
- Key result
- Test procedure:
- burning rate test: preliminary screening test
- Burning time:
- ca. 3 s
- Remarks on result:
- substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
Applicant's summary and conclusion
- Interpretation of results:
- not classified based on GHS criteria
- Conclusions:
- The test item has been determined to be not highly flammable as it did not propagate combustion over the 200 mm of the preliminary screening test in under 4 minutes.
- Executive summary:
The determination was carried out by measuring the burning rate of test item prepared as a pile of set dimensions, using a procedure designed to be compatible with Method A.10 Flammability (Solids) of Commission Regulation (EC) No 440/2008 of 30 May 2008.
A mould (250 mm long x 20 mm wide x 10 mm high) was loosely filled with test item (tested as received). A non-combustible, non-porous board was placed onto the mould which was then inverted. The mould was removed and an air-rich Bunsen burner flame applied to one end of the pile until ignition occurred; the time taken to propagate 200 mm was recorded.
The pile ignited with a small orange flame which self-extinguished after 3 seconds. A red glowing reaction then propagated over 200mm in 30 minutes 9 seconds. The result of the preliminary screening test obviated the need to perform the main test.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
