Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 283-659-9 | CAS number: 84696-55-9 Substance resulting from the use and production of tin and its alloys obtained from primary and secondary sources and including recycled plant intermediates. Composed primarily of tin compounds and may contain other residual nonferrous metals and their compounds.
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Guidance on Safe Use
Administrative data
First-aid measures
Inhalation: Bring the person into the fresh air, rest and consult a doctor
Oral ingestion: Rinse mouth (spit out!), and consult a doctor if necessary
Dermal: Remove contaminated clothing, wash immediately with water and soap
Eyes: Rinse for 15 minutes with water, consult an ophthalmologist
General:Get medical advice as quickly as possible in the case of a serious or lasting dysfunction.
Fine powders and/or soluble compounds of As, Pb … have hazardous properties with delayed effects following inhalation and oral intake.
Fire-fighting measures
Suitable extinguishing media: No special recommendation (taking account of environment polluting extinguishing water)
Extinguishers that cannot be used: None, preferably no water
Special exposure dangers: No
Special protective equipment for Fire Brigade personnel: Wear a self-contained breathing apparatus and protective clothing.
Special hazards arising from the substance or mixture: Respirable dust.
Advice for firefighters: Wear a self-contained breathing apparatus and full protective clothing and gloves must be worn in case of fire. Dispose of fire debris and contaminated fire fighting media in accordance with official regulations.
Accidental release measures
Personal precautionary measures: Avoid inhalation of the dust and/or fumes. Wear suitable clothing, breathing protection (P2 filter) and face protection.
Environmental protection measures: Take action to prevent the substance from ending up in drainage pipes, surface water and the soil.
Cleaning methods: Seal off and cover spilt product (sand)
Material for containment:No data
Methods for cleaning up:Ventilate the area thoroughly.
Restrict the area to those persons wearing respiratory protection. Do not allow unprotected people into the area until cleanup has been completed.
Allow spilled material to solidify and scrape up with shovels into a suitable container for recycle or disposal as hazardous waste.
Collect dust, particulates, powders using a vacuum cleaner with a HEPA filter. Place in a suitable container for recycling or disposal as hazardous waste
DO NOT empty into drains or waterways.
Handling and storage
Handling: Avoid swallowing or inhaling the dust or smoke. Avoid activities that create dust or smoke. Provide good ventilation to keep the concentration in the air below the limits. Procedural and control technologies are used to minimise emission and any resulting exposure (when handling the substance, during cleaning and maintenance works and in case of accident). All procedures are well documented and supervised by the site operator.
Only properly trained and authorised personnel may handle the substance.
Conditions for safe storage, including any incompatibilities:
Requirements to be met by storerooms and containers:Store away from incompatible materials. Store in a cool, dry, well-ventilated place, avoiding contact with heat and strong acids.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Occupational exposure limit values: Current OELs/TLV-TWAs (in mg/m3) in the EU of the components
Belgium France Germany UK
Tin 2 2 2 2
Copper 1 (0,2 fume) 1 (0,2 fume) 0.1 1 (0,2 fume)
Lead 0.15 0.1 0.1 0.1
Zinc 5 5 5 5
Antimony 0,5 0,5 - 0,5
Cadmium 0.002 0.05 0.05 0.025
Arsenic 0.16 0.2 0.016 0.05
Exposure controls
Technical protection measures:Local exhaust ventilation with enclosure and general ventilation are required in case of emission of dust/aerosol in air. Suction nozzles of local ventilation should be located at or below work level. Air outtakes of general ventilation should be located at the top of the room and air intakes should be located at the bottom of the room.
Personal Protection:Avoid direct contact with the material. If the concentration level is determined and known, select appropriate personal protection measures taking into account the concentration at the given workplace, exposure length and works performed by the given employee as well as the instructions provided by the producer of the personal protection equipment.
Eye/face protection:Protective goggles (EN 166).
Skin protection:Protective clothing (EN 347, EN 340).
Body /hand protection:Work gloves against dust (EN 388).
Respiratory protection:With dust or fume formation: P3-mask (EN 149).
Personal hygiene:Wash hands thoroughly after work to prevent oral ingestion. Do not eat, drink or smoke in the workplace.
Environmental exposure controls:Take action to prevent the substance from getting into drainage pipes, surface water and the soil.
Stability and reactivity
The product is stable and unreactive in normal circumstances.
Disposal considerations
Product recommendation:Waste must be removed in accordance with national and/or regional waste legislation.
European waste catalogue:10 08 99
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.