Di-tert-dodecyl disulphide

Skin irritation / corrosion

Administrative data

Endpoint:

skin irritation: in vitro / ex vivo

Type of information:

experimental study

Adequacy of study:

key study

Study period:

26 November 2015 -- 14 December 2015

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2015

Report date:

2016

Materials and methods

Test guideline

Qualifier:

according to guideline

Guideline:

other: OECD Guideline 439 (In vitro dermal irritation)

Deviations:

no

GLP compliance:

yes (incl. QA statement)

Test material

Test material information

Constituent 1

Reference substance name:

Di-tert-dodecyl disulphide

EC Number:

248-468-7

EC Name:

Di-tert-dodecyl disulphide

Cas Number:

27458-90-8

Molecular formula:

C22H46S2 to C24H50S2

IUPAC Name:

2-ethyl-5,6,6-trimethyl-1-[(3,5,6,6-tetramethylheptyl)disulfanyl]heptane; 2-ethyl-5,6,6-trimethyl-1-[(5,6,6-trimethylheptyl)disulfanyl]heptane; 3-ethyl-1-[(2-ethyl-5,6,6-trimethylheptyl)disulfanyl]-5,6,6-trimethylheptane

Test material form:

other: light yellow liquid

In vitro test system

Test system:

human skin model

Source species:

human

Cell type:

other: EpiskinTM Model Kit (0.38 cm2 tissues)

Cell source:

other: SkinEthic Laboratories, Lyon, France

Vehicle:

unchanged (no vehicle)

Details on test system:

TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: 37°C
- Temperature of post-treatment incubation (if applicable): 37°C

REMOVAL OF TEST MATERIAL AND CONTROLS
- Number of washing steps: several
- Observable damage in the tissue due to washing: no
- Modifications to validated SOP: no

DYE BINDING METHOD
- Dye used in the dye-binding assay: MTT
- Spectrophotometer: no data
- Wavelength: 570 nm
- Filter: no data
- Filter bandwidth: no data

NUMBER OF INDEPENDENT TESTING RUNS / EXPERIMENTS TO DERIVE FINAL PREDICTION: 1
SCORING SYSTEM:
- Optical density (OD) was measured at 570 nm:
Relative mean viability (%) = 100 x mean cOD(test item) / mean cOD(negative control)
where:
- mean cOD Negative Control = mean ODNC – mean ODblank
- mean cOD Test Item = mean ODTI – mean ODblank
- mean cOD Positive Control = mean ODPC - mean ODblank
DECISION CRITERIA
Mean relative viability is = 50%: category 2 (H315)
Mean relative viability is > 50% and Mean IL-1a released concentration > 60 pg/mL: category 2 (H315)
Mean relative viability is > 50% and Mean IL-1a released concentration = 60 pg/mL: no category

Control samples:

yes, concurrent vehicle

yes, concurrent positive control

Amount/concentration applied:

Amount/concentration applied
TEST MATERIAL
- Amount(s) applied (volume or weight with unit): 10 ìL
VEHICLE
- Amount(s) applied (volume or weight with unit): 10ìL
POSITIVE CONTROL
- Amount(s) applied (volume or weight): 10ìL
- Concentration (if solution): 5% (w/v) aqueous solution

Duration of treatment / exposure:

15 min

Duration of post-treatment incubation (if applicable):

MTT-loading after a 42h-incubation period following rinsing. Observation of MTT-> formazan transform
ation by viable cells

Number of replicates:

3

Results and discussion

In vitro

Results

Irritation / corrosion parameter:

% tissue viability

Run / experiment:

Time point: 15 min exposure + 42h expression

Value:

100

Vehicle controls validity:

valid

Remarks:

100%

Negative controls validity:

not examined

Positive controls validity:

valid

Remarks:

9%

Remarks on result:

no indication of irritation

Other effects / acceptance of results:

- OTHER EFFECTS:
- Visible damage on test system: no
- Direct-MTT reduction: no
- Colour interference with MTT: no

ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: yes
- Acceptance criteria met for positive control: yes
- Acceptance criteria met for variability between replicate measurements: yes
- Range of historical values if different from the ones specified in the test guideline: no

Applicant's summary and conclusion

Interpretation of results:

GHS criteria not met

Conclusions:

Under the experimental conditions of this study, the test item is considered to be non-irritant to skin.

Executive summary:

The skin irritation potential of DI-TERT-DODECYL DISULPHIDE was evaluated in the EpiskinTM reconstructed human epidermis model. The study design was based upon international guidelines (OECD Guideline No. 439 and Commission Regulation (EC) No. 761/2009, B.46. The study was conducted in compliance with standard operating procedures and the principles of Good Laboratory Practice. Preliminary tests were performed to detect the ability of the test item to directly reduce MTT as well as its colouring potential. Following the preliminary tests, the skin irritation potential of the test item was tested in the main test. The test item and both the negative and positive controls were applied topically on triplicate tissues and incubated at room temperature for 15 minutes. At the end of the treatment period, each tissue was rinsed with D-PBS and incubated for 42 hours at +37°C, 5% CO2 in a humidified incubator. The cell viability was then assessed by means of the colourimetric MTT reduction assay. Relative viability values were calculated for each tissue and expressed as a percentage of the mean viability of the negative control tissues which was set at 100% (reference viability).

In the preliminary tests, the test item was found not to have direct MTT reducing properties or colouring potential. All acceptance criteria for the negative and positive controls were fulfilled. The study was therefore considered to be valid. Following a 15 minutes exposure and 42 hours of recovery period, the relative mean viability of the tissues treated with the test item was 100% with a standard deviation of 9%. As the mean viability was > 50% after the MTT reduction, the results met the criteria for a non-irritant response.