Substance Information

NB: Registration status and tonnage

  • The REACH Registered substance portal was updated on 9th November 2020; the REACH registered factsheets were further updated on 21st December 2020. Details of the improvements can be found at Dissemination Platform Updates. Reprocessing the entire dataset is ongoing since 21 December 2020. ECHA is making all possible efforts to synchronise the registration status and tonnage with the shortest delay.
  • While reprocessing is ongoing please note that substances whose registration dossiers are not yet processed can incorrectly state in the Infocard that they are not registered under REACH. In these cases if there is a link to a REACH registered substance factsheet then the substance IS registered. The correct total tonnage band can be found in the factsheet(s) for the substance.

Naphtha (petroleum), light, C5-rich, sweetened

A complex combination of hydrocarbons obtained by subjecting a petroleum naphtha to a sweetening process to convert mercaptans or to remove acidic impurities. It consists of hydrocarbons having carbon numbers predominantly in the range of C4 through C5, predominantly C5, and boiling in the range of approximately minus 10°C to 35°C (14°F to 95°F).

EC / List no.: 295-442-6

CAS no.: 92045-60-8

Mol. formula:

formula
GHS08: Serious Health Hazard

Danger! According to the harmonised classification and labelling (ATP01) approved by the European Union, this substance may be fatal if swallowed and enters airways, may cause genetic defects and may cause cancer.

GHS02: Flammable GHS07: Health hazard GHS09: Hazardous to the Environment

Additionally, the classification provided by companies to ECHA in REACH registrations identifies that this substance is toxic to aquatic life with long lasting effects, is an extremely flammable liquid and vapour, is suspected of damaging fertility or the unborn child, causes skin irritation and may cause drowsiness or dizziness.

  • C

Carcinogenic

  • M

Mutagenic

This substance has not been registered under the REACH Regulation, therefore as yet ECHA has not received any data about this substance from registration dossiers.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses

This substance is used in the following products: fuels, air care products, anti-freeze products, coating products, lubricants and greases, washing & cleaning products and welding & soldering products.
Other release to the environment of this substance is likely to occur from: indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters), outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids), indoor use as processing aid and outdoor use as processing aid.

Article service life

Release to the environment of this substance can occur from industrial use: in processing aids at industrial sites, manufacturing of the substance, formulation of mixtures, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid and of substances in closed systems with minimal release.
ECHA has no public registered data indicating whether or into which articles the substance might have been processed.

Widespread uses by professional workers

ECHA has no public registered data indicating whether or in which chemical products the substance might be used. ECHA has no public registered data on the types of manufacture using this substance. Other release to the environment of this substance is likely to occur from: indoor use as processing aid, outdoor use as processing aid, indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).

Formulation or re-packing

ECHA has no public registered data indicating whether or in which chemical products the substance might be used. Release to the environment of this substance can occur from industrial use: formulation of mixtures, manufacturing of the substance, formulation in materials, in processing aids at industrial sites, in the production of articles, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, for thermoplastic manufacture, as processing aid and of substances in closed systems with minimal release.

Uses at industrial sites

This substance has an industrial use resulting in manufacture of another substance (use of intermediates).
This substance is used in the following areas: formulation of mixtures and/or re-packaging.
This substance is used for the manufacture of: chemicals and rubber products.
Release to the environment of this substance can occur from industrial use: in processing aids at industrial sites, manufacturing of the substance, as an intermediate step in further manufacturing of another substance (use of intermediates), formulation of mixtures, as processing aid, of substances in closed systems with minimal release, formulation in materials, in the production of articles, as processing aid and for thermoplastic manufacture.

Manufacture

Release to the environment of this substance can occur from industrial use: manufacturing of the substance, in processing aids at industrial sites, as processing aid, formulation of mixtures, formulation in materials, in the production of articles, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, for thermoplastic manufacture and of substances in closed systems with minimal release.

The InfoCard summarises the non-confidential data on substances as held in the databases of the European Chemicals Agency (ECHA), including data provided by third parties. The InfoCard is automatically generated. Information requirements under different legislative frameworks may therefore not be up–to–date or complete. Substance manufacturers and importers are responsible for consulting official publications. This InfoCard is covered by the ECHA Legal Disclaimer.

ECHA logo about INFOCARD - Last updated: 11/11/2020

Categories Display