Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. If not breathing give artificial
respiration. If breathing is difficult administer oxygen.
Seek medical attention immediately.
Emergency measure - Eyes: Flush with water for at least 15 minutes. Seek medical
attention immediately.
Emergency measure - Skin: Flush area with large amounts of water for 15 minutes.
Remove contaminated clothing. Use soap if available. Seek
medical attention immediately.
Emergency measure - Ingestion: Seek medical attention immediately. Do not induce vomiting
unless directed by medical personnel. Never give anything by
mouth to an unconscious person.

Fire-fighting measures

Recommended extinguishing agent: Fires involving this material may be extinguished with
appropriate media, including water.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes including carbon and nitrogen
oxides and fluorine containing compounds. However, there is
no experimental evidence to support the anticipated
combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.

Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.

Absorb spillages of solutions with a suitable inert material
(eg sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original containers.

Clean the spillage area and dispose of waste material
preferably by incineration in accordance with local

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.

Engineering controls are necessary to reduce exposure to the

When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166

When necessary appropriate respiratory protection should be
used. e.g. a dust mask conforming to EN149 FFP1.

The standards mentioned above should be regarded as a

Storage: Store in a cool, dry, well-ventilated area.

Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: The material should be packaged in double polyethylene liner
in 40-100 kg capacity plastic drums.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Transport code: UN1325
Transport: Avoid crushing containers. In the even of a spillage,
observe warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: None which is hazardous.

Dust explosion: Under normal conditions of use this material does not
present a significant explosion hazard. However, like most
organic compounds it is combustible and may form a dust
explosion if widely dispersed in air.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery from minor spillages or accidental discharge is not
economically or technically feasible, and such waste
material will be disposed of by incineration. In principle,
it may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is not
considered hazardous to health. However, there are
reasonable grounds for concern over mutagenicity.

The dust hazard will be minimised by appropriate storage and
handling methods.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes including carbon
and nitrogen oxides and halogen containing substances could
be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly
tothe sewage system or the aqueous environment. However,

adverse effects on sewage treatment systems would be

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: Not applicable.