Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove from exposure and keep person at rest. Seek medical
Emergency measure - Eyes: Irrigate thoroughly with water for at least 15 minutes. If
irritation develops seek medical attention.
Emergency measure - Skin: Wash affected areas with soap and water. If irritation
develops seek medical attention.
Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water spray, foam, dry-powder or carbon dioxide.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes such as carbon, sulfur and
nitrogen oxides.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: In the event of a large spillage wear an air suit, rubber
gloves and Wellington boots and carefully collect up the
solid and transfer to a sealed container. Wipe up any
residual powder with a damp cloth and place in a container
for disposal. All material should be disposed of in
accordance with section 6.1.30. In the event of a small
spillage wear laboratory coat, eye protection, rubber gloves
and, if the spillage occurs outside a ventilated area, a
half air-fed suit or air-fed visor. Collect the solid
carefully and transfer to a sealed container. Wipe up any
residual solid with a damp cloth and place in a container
for disposal. All material should be disposed of in
accordance with section 6.1.03.

Handling and storage

Handling: Avoid contact with skin, eyes and clothing.

Protective rubber gloves (14 inch PVC gauntlets BS EN374.1),
paper suits and safety goggles (BS2092.2.I.C grade 2 impact
resistant and chemical splash resistant) should be worn.
Where dust generation cannot be avoided, provide and use
local exhaust ventilation. Where local exhaust ventilation
is impracticable, wear an aproved air-fed visor (TM 14/7.25)
or half air suit (prEN 943 or TM 14/7.27).

Storage: The location should be maintained at ambient temperatures,
be cool, dry and well ventilated.

The substance should be stored in the original container
that should be correctly labelled and kept tightly closed
when not in use.

Packaging of the substance and or preparation: Fibre board drums with double lined polyethylene.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Transport code: None.
Transport: Avoid crushing containers. Observe the warning labels on the
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None which is hazardous.

Dust explosion: Not yet determined.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: In normal use as a synthetic intermediate no recycling of
the substance is possible as it is completely converted
during the production processes. Spilled material should be
collected and disposed of by incineration.

Industry - Possibility of neutralisation: The substance is not considered to constitute an immediate

Industry - Possibility of destruction: controlled discharge: None.

Industry - Possibility of destruction - incineration: Incineration is the preferred method of destruction.
Suitable abatement measures for oxides of nitrogen, carbon
monoxide, carbon dioxide and sulphur containing gases should
be set in place for incinerator waste gases.

Industry - Possibility of destruction - water purification: This is not considered to be a normally suitable method for
destruction of the material. However, adverse effects on
sewage treatment systems would be unlikely.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable, the substance will not enter the public