Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Water solubility

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
water solubility
Type of information:
experimental study
Adequacy of study:
key study
Study period:
October 2005
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: Study conducted in compliance with agreed protocols, with no or minor deviation from standard test guidelines and/or minor methodological deficiencies, which do not affect the quality of relevant results.
Qualifier:
according to guideline
Guideline:
OECD Guideline 105 (Water Solubility)
Deviations:
no
Qualifier:
according to guideline
Guideline:
EU Method A.6 (Water Solubility)
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Type of method:
column elution method
Water solubility:
< 0.012 mg/L
Temp.:
20 °C
Remarks on result:
other: Peak 1. pH was 4.2 and 6.0 for the two different flow rates.
Water solubility:
< 0.03 mg/L
Temp.:
20 °C
Remarks on result:
other: Peak 2. pH was 4.2 and 6.0 for the two different flow rates.
Water solubility:
< 0.1 mg/L
Temp.:
20 °C
Remarks on result:
other: Peak 3. pH was 4.2 and 6.0 for the two different flow rates.

Preliminary test:

The concentration of EA-3098 in the aqueous phases after two and three successive centrigugation steps was for peak 1 <1.0 x 10 -5 g/l, peak 2 <4.0 x 10-5 g/l and for peak 3 <1.o x 10-4 g/l, respectively. From this it could be concluded that the water solubility of EA-3098 is <10 mg/l. Therefore, the column elution method was chosen for the determination of the water solubility of EA-3098. The pH of the aqueous phase after 2 centrifugation steps was 9.5.

Main study (column elution method):

Analysis confirmed the presence of test substance on the loaded carrier material before filling the column.

The eluates did not contain undissolved particles. In the eluates from the blank column a small peak was detected for peak 1. The concentration was calculated using the RF-factor and was <Limit of Detection (LOD).

The results are summarised in Tables 1, 2 and 3.

Table 1: Results of column elution method for peak 1

Actual flow rate (ml/h)

Sample no.

Concentration analysed (mg/l)

pH

24

1-10

<LOD*

4.2

12

1-10

<LOD*

6.0

* LOD = 0.012 mg/l (all samples contained a small test substance peak, which was smaller than the limit of detection).

Table 2: Results of column elution method for peak 2

Actual flow rate (ml/h)

Sample no.

Concentration analysed (mg/l)

pH

24

1-10

<LOD*

4.2

12

1-10

<LOD*

6.0

*LOD = 0.03 mg/l

Table 3: Results of column elution method for peak 3

Actual flow rate (ml/h)

Sample no.

Concentration analysed (mg/l)

pH

24

1-10

<LOD*

4.2

12

1-10

<LOD*

6.0

*LOD = 0.1 mg/l

Conclusions:
Interpretation of results (migrated information): insoluble (< 0.1 mg/L)
Since EA-3098 is a mixture of components, quantitative analysis was based on the three largest peaks in the chromatogramn of EA-3098.

The water solubility of EA-3098 at 20.4 ± 0.5°C is < 1. 2x 10-5 g/l based on peak 1, < 3.0 x 10-5 g/l based on peak 2 and < 1.0 x 10-4 g/l based on peak 3, using the column elution method.
The pH was measured to be 4.2 and 6.0.
Executive summary:

The column elution method was used to determine the water solubility of EA-3098 and was based on the following guidelines:

OECD Guideline no. 105: "Water Solubility" and EEC Directive 62/69/EEC Method A.6 "Water solubility".

Since EA-3098 is a mixture of components, quantitative analysis was based on the three largest peaks in the chromatogramn of EA-3098.

The water solubility of EA-3098 at 20.4 ± 0.5°C is < 1.2 x 10-5 g/l based on peak 1, < 3.0 x 10-5 g/l based on peak 2 and < 1.0 x 10-4 g/l based on peak 3, using the column elution method.

The pH was measured to be 4.2 and 6.0.

.

Description of key information

Since EA-3098 is a mixture of components, quantitative analysis was based on the three largest peaks in the chromatogramn of EA-3098.

The water solubility of EA-3098 at 20.4 ± 0.5°C is < 1.2 x 10-5 g/l based on peak 1, < 3.0 x 10-5 g/l based on peak 2 and < 1.0 x 10-4 g/l based on peak 3, using the column elution method.

Key value for chemical safety assessment

Water solubility:
0.1 mg/L
at the temperature of:
20.4 °C

Additional information

The column elution method was used to determine the water solubility of EA-3098 and was based on the following guidelines:

OECD Guideline no. 105: "Water Solubility" and EEC Directive 62/69/EEC Method A.6 "Water solubility".

Since EA-3098 is a mixture of components, quantitative analysis was based on the three largest peaks in the chromatogramn of EA-3098.

The water solubility of EA-3098 at 20.4 ± 0.5°C is < 1.2 x 10-5g/l based on peak 1, < 3.0 x 10-5g/l based on peak 2 and < 1.0 x 10-4g/l based on peak 3, using the column elution method.

The pH was measured to be 4.2 and 6.0.