Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. If breathing is difficult or ceases,
give oxygen or mouth to mouth resuscitaton. Keep warm and at
rest. Obtain medical attention.
Emergency measure - Eyes: Wash thoroughly with water and continue for at least 15
minutes. Seek medical advice.
Emergency measure - Skin: Remove contaminated clothing and launder before reuse.
Thoroughly wash all affected areas with soap and water.
Seek medical attention.
Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Use carbon dioxide, water, dry powder or foam.

Product arising from burning: Highly toxic and corrosive fumes of fluorides.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate all personnel from the immediate vicinity and
isolate the affected area.

Wear an air suit or breathing apparatus and impervious
clothing designed to protect the head and skin, rubber or
plastic gloves and boots.

Collect spillage, preferably by vacuum, and place in a
suitably labelled, sealable container for disposal or
recovery. When as much as possible of the spillage has been
collected, flush the spillage site with copious amounts of
water to an effluent drain. If the spilage was in an
enclosed or partially enclosed area, thoroughly ventilate
and test the area before allowing reaccess.

Dispose of waste material in accordance with local
regulations by incineration.

Handling and storage

Handling: Substance is used in enclosed plant with a suitable local
exhaust ventilation. An air suit, gloves and rubber boots
are worn when this substance is handled.

Storage: Store at or below ambient temperature in a dry dark place
(e.g.in double polyethylene bags inside closed and labelled
keg). Keep containers tightly closed when not in use.
Whenever possible hydroxy acid should be used in enclosed
plant fitted with suitable exhaust ventilation.

Packaging of the substance and or preparation: CCI11400 is packaged in double polyethylene bags inside a
keg.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: none
Transport: Avoid crushing the containers. In the event of a spillage
observe warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None

Dust explosion: There is a potential dust explosion hazard for this organic
powder.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: The substance will be consumed during normal usage.

Industry - Possibility of destruction: controlled discharge: Batch filtate will be the only material containing waste
substance (up to 1 gram). Treated batch filtrate and the
batch water displacement washes are sent to the on site
waste water treatment plant.

Industry - Possibility of destruction - incineration: Not applicable

Industry - Possibility of destruction - water purification: None

Public at large - Possibility of recovery/recycling: Not applicable. The substance will not enter the public
domain.