Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Move to fresh air. Symptomatic treatment. Seek immediate
medical attention if necessary.
Emergency measure - Eyes: Wash eyes thoroughly for at least 15 minutes with water.
Seek medical attention.
Emergency measure - Skin: Remove contaminated clothing.

Wash thoroughly with soap and water. Seek medical attention
if irritation occurs.
Emergency measure - Ingestion: Symptomatic treatment. Do not induce vomiting. Seek
immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water, carbon dioxide, foam or dry chemical.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon and nitrogen
oxides). However, there is no experimental evidence to
support the anticipated combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear impervious gloves, protective clothing, eye protection
and respiratory protection as appropriate.


Avoid dust formation. Absorb spillages of solutions with a
suitable inert material (eg sand or soil). Carefully
transfer the spillage to waste containers, or use a sealed
industrial vacuum machine. Containers filled with waste
material must be labelled in the same way as the original
containers.


Clean the spillage area with water and detergent. Wash the
waste to an on-site waste water treatment plant. Do not
allow waste to enter surface drainage systems.


Dispose of waste material by incineration in accordance with
local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
personal protective equipment should be worn, such as
chemical resistant gloves, to standard prEN 374, chemical
protective clothing to EN 368, eye protection to prEN 166,
and, where appropriate, adequate respiratory protection.

Storage: Store in a dry well-ventilated area. Avoid elevated
temperatures above ca 20°C.


Keep containers tightly closed when not in use, away from
moisture.

Packaging of the substance and or preparation: 25kg fibreboard kegs with antistatic liners.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None
Transport: Avoid crushing containers.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: None which is hazardous.

Dust explosion: There is a potential dust hazard since the substance is an
organic dusty solid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery from spillages or accidental discharge is not
economically or technically feasible, and such waste
material will be collected mechanically and disposed of by
incineration. [Recovery code 611].

Industry - Possibility of neutralisation: Not applicable as the notification tests have not identified
any hazardous properties. [Neutralisation code 630].

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) may be disposed of by
landfill in accordance with local regulations.

[Landfill code 650].

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon and
nitrogen oxides) could be formed.

[Incineration code 661].

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.

[Removal in treatment plants code 640].

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: Not applicable.