Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. Seek medical attention.
Emergency measure - Eyes: Immediately flush eyes with copious amounts of water for at
least 15 minutes. Seek urgent medical attention.
Emergency measure - Skin: Wash affected area with soap and water. Seek medical
Emergency measure - Ingestion: Rinse out mouth with water. Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water fog, foam, Kohlendioxid and dry chemicals.

Product arising from burning: The substance is combustible and will burn if involved in

a fire, evolving noxious fumes (eg carbon and nitrogen
oxides and fluorine and phosphorous containing compound).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.

Wear appropriate personal protective equipment conforming to
the relevant national or international standards, as
mentioned in section "handling".

Clean the spillage area with paper towels and place in a
closed container for disposal.

Dispose of waste material in accordance with local
regulations by incineration.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the

When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.

Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling

exposure, be suitable for the purpose, and conform to the
appropriate international or national standards, such as a
dust mask conforming to EN149 FFP1.

These measures should be regarded as a minimum.

Storage: Store in a cool area.

Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 3 litre brown coloured polyplastics bottle.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known

Chemical reaction with water: None which is hazardous.

Dust explosion: Under normal conditions of use this material does not
present a significant explosion hazard. However, like most
organic compounds it is combustible and may form a dust
explosion if widely dispersed in air.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will not occur as all waste is
incinerated. However, recovery from minor spillages or
accidental discharge is not economically or technically
feasible, and such waste material will be disposed of by
incineration. In principle, it may be possible to recover
larger spillages of uncontaminated material for subsequent

Industry - Possibility of neutralisation: None

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages may be disposed of by
landfill at an authorised tip in accordance with local

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon and
nitrogen oxides and fluorine and phosphorous containing
compounds) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly
tothe sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be

Industry - Possibility of destruction - other: None

Public at large - Possibility of recovery/recycling: Not applicable