Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Moved the exposed person to fresh air at once. Rinse nose
and mouth with water. Get medical attention if any
discomfort continues.
Emergency measure - Eyes: Immediately flush with plenty of water for up to 15 minutes.
Remove any contact lenses and open eyes wide appart. Get
medical attention if any discomfort continues.
Emergency measure - Skin: Remove affected person from source of contamination. Remove
contaminated clothes and rinse skin thoroughly with water.
Get medical attention if any discomfort continues.
Emergency measure - Ingestion: Promptly get affected person to drink large volumes of water
to dilute the swallowed chemical. Rinse nose, mouth and
throat with water. Get medical attention if any discomfort
continues.

Fire-fighting measures

Recommended extinguishing agent: Appropriate extinguishing media would include water, dry
chemical, foam and carbon dioxide.

Product arising from burning: The substance is combustible and will burn if involved in
a fire, evolving noxious fumes (eg carbon oxides and sulphur
and sodium containing compounds).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Personal Precautions:

Wear protective clothing. Avoid contact with eyes. Avoid
inhalation of dust. In case of inadequate ventilation, use
respiratory protection.


Environmental Precautions:

Do not allow to enter drains, sewers or watercourses. Avoid
release to the environment.


Spill Clean Up Methods:

Wear necessary protective equipment. Avoid generation and
spreading of dust. Collect powder using special dust vacuum
cleaner with particle filter or carefully sweep into a
closed container. Collect spillage in containers, seal
securely and deliver for disposal according to local
regulations.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.


Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling
exposure, be suitable for the purpose, and conform to the
appropriate international or national standards, such as a
dust mask conforming to EN149 FFP1.


These measures should be regarded as a minimum.

Storage: Store in tightly closed original container in a cool, dry,
well-ventilated area. Keep separate from food, feedstuffs,
fertilisers and other sensitive material.



Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: The commercial substance is packaged in 25 kg polypropylene
containers or 25 kg poly-lined steel drums.


The blended substance is packaged in 25 litre polypropylene
containers, or if larger pack sizes are required, 200 litre
polypropylene drums unless other ingredients in the blend
dictate that other packaging is required.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: None.
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None which is hazardous.

Dust explosion: Like most organic compounds, this substance is combustible
and may form a dust explosion if widely dispersed in air.


However, as it is manufactured as an aqueous preparation,
this is not applicable.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration or landfill. In principle, it
may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: Not applicable.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed
with inert material (e.g. sand or soil) may be disposed of

by landfill at an authorised tip in accordance with local
regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (e.g. carbon
oxides and sulphur and sodium containing compounds) could be
formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly
tothe sewage system or the aqueous environment.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: None.