Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 424-240-4 | CAS number: 96478-09-0
Guidance on Safe Use
Administrative data
First-aid measures
Inhalation :
Remove to fresh air, seek medical attention if necessary.
Skin contact :
Take off contaminated clothing, and wash skin with soap and copious amounts of water. Launder clothing before reuse.
Eye contact :
In case of contact, immediately flush eyes with copious amounts of water for at least 15 minutes. Seek medical attention if irritation persists.
Ingestion :
Have victim rinse mouth with water. Have victim drink 240 to 300ml of water, do not induce vomiting. Get medical attention.
Fire-fighting measures
Extinguishing Media :
Water mist, dry chemical powder, carbon dioxide, foam or dry sand can be used at the early stage of the fire.
Specific Hazards with regard to Fire-Fighting Measures :
Burning may produce carbon monoxide and nitrogen compounds, including oxides of nitrogen and hydrogen cyanide.
Specific fire-fighting measures :
In fire situations involving the surrounding area, move the product to safe place if you can do it without risk.
Protection of fire-fighters :
Wear self-contained breathing apparatus and appropriate personal protective equipment.
Accidental release measures
Measures for Handling Personnel :
Wear appropriate personal protective equipment during clean-up.
Measures for environmental effects :
Keep spills and cleaning runoffs away from drains, surface, ground-water and soil.
Measures when handling spilled substances :
If small amounts are spilled, wipe or vacuum up. If large amount is concerned, moisten material with water, and place it in covered container as much as you can. Wipe or vacuum up residual trace. Collected material should be disposed. Ventilate area during and after pick up.
Handling and storage
Handling :
Keep away from heat and sources of ignition. Handle with appropriate personal protective equipments under ventilation.
Care should be taken to avoid generation of dust. Explosion-proof electrical equipment is recommended if
considerable dust is generated.
Storage :
Store in well-ventilated place at ambient temperature. Tightly closed. Keep away from direct sunlight and sources of ignition
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not classified as hazardous for transport by road/rail
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not classified as hazardous for transport by inland waterways.
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not classified as hazardous for marine transport.
Shipping information
- Proper shipping name and description:
- Not applicable
- Chemical name:
- Not applicable
- Labels:
- Not applicable
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not classified as hazardous for transport by air
Shipping information
- Proper shipping name and description:
- Not applicable
- Chemical name:
- Not applicable
- Labels:
- Not applicable
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Engineering measures : Mechanical exhaust and local exhaust are necessary.
Adopted value : There is no TLV specified by ACGIH1).
Personal protective equipment :
Respiratory protection : If ventilation is inadequate, wear appropriate respirator which is approved or made according to a standard approved by the relevant national body for health and safety.
Hand protection : Rubber or vinyl gloves
Eye protection : Safety goggles
Skin and body protection : Clean body-covering clothing
Safety and Health measures : Wash thoroughly after handling. Follow good industrial hygiene practices for ventilation and clean up. Launder clothing before reuse.
Stability and reactivity
Stability :
This product is stable under normal conditions of handling and storage.
Conditions to avoid :
Polymerization may occur by high temperature, strong light, radio active rays, plasma ect.
Incompatible materials :
Contact with peroxides or azo compounds may also cause polymerization. Acids or bases may cause polymerization or decomposition.
Hazardous decomposition products :
Burning may produce carbon monoxide and nitrogen compounds, including oxides of nitrogen and hydrogen cyanide.
Disposal considerations
Comply with the applicable regulations in your country.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
