Registration Dossier

Administrative data

First-aid measures

- Contact with eyes: Wash with water or saline. Keep eyelids open during flushing. Consult your doctor and show the label.
- Contact with skin: Remove clothing (possibly shoes) contaminated. Wash the affected area with soap or mild detergent and rinse thoroughly with water until the complete removal of the substance (15-20 minutes). Tell your doctor immediately and show the label.
- Ingestion: if swallowed, rinse mouth thoroughly with water. Tell your doctor immediately and show this container or label.
- Inhalation: avoid breathing dust that may be generated by manipulating the product. Move to fresh air in a well-ventilated area. Contact your doctor if the exposure was significant in terms of quantity or time ..

Fire-fighting measures

Extinguishing
- Suitable extinguishing agents: Water spray, dry chemical, foam, carbon dioxide
- Unsuitable extinguishing agents: /

Special hazards arising from the substance
- Hazardous Combustion Products: thermal decomposition or combustion may cause the release of toxic fumes and dangerous COx.

Advice for fire-fighters
- Recommendations protection techniques: do not attempt to extinguish the fire without the use of a self-contained breathing apparatus (SCBA) and appropriate protective clothing.
- Devices for Special Protection for fire-fighters: Wear boots, gloves, eye and face protection, respirators comply with the relevant standards UNI EN for Italy and for Europe. Tools given in the best conditions of precaution on the basis of the information in the previous subsections.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Protective equipment for non-emergency personnel
- Eyes: Wear appropriate protective equipment (see section 8).
- Skin: Wear clothing with full body protection.
- Airway: In case of fire and / or explosion do not breathe fumes and vapors. Use a self-contained breathing apparatus (SCBA) and appropriate protective clothing. The vapors can be removed by spraying with water.

Individual protection measures, such as personal protective equipment
If the results of the risk assessment carried out in accordance with Directive 98/24/EEC (In Italy, Legislative Decree no. 81, April 9, 2008, as amended) show that the general and collective prevention are not sufficient to reduce the risk, and if you can not avoid exposure to the substance by other means must be adopted adequate personal protective equipment, comply with the relevant technical standards UNI / EN.
a) Eye / face: Safety glasses according to EN 166, face shield.
b) Skin protection
- Hand protection: Wear protective gloves. The glove material has to be impermeable and resistant to the product / the substance / the preparation. Material: Nitrile (nitrile rubber), hypoallergenic. Thickness: not less than 0.12 mm.
- Other, protection Choose body protection must be chosen depending on activity and possible exposure, eg. boots, chemical-protection suit according to the EN 14605 in case of splashes or EN ISO 13982 in case of dust.
c) Respiratory protection: If the risk assessment shows the need for air-purifying respirators, use a dust mask type P1, P2 and P3 (EN 143). Use respirators and components tested and approved under appropriate government standards such as NIOSH (U.S.) and CEN (EU). In case of brief exposure or low pollution use respiratory filter P1 for dust category 2a (inert dusts with TLV 10 mg/m3) Immediately remove all soiled and contaminated clothing apparatus.
d) Thermal hazards: Not provided for in the standard practice of using the substance. Assess any personal protective equipment according to specific conditions of use of the same.

Environmental precautions
In case of accidental release or leakage avoid that the substance reaches discharges and can reach surface water or groundwater.
Methods and materials for containment of the reclamation:
- Containment: Collect all the material spilled on the ground with appropriate protective equipment and put it in a clean, dry container.
- Methods of cleaning up: Recover the substance for suction or other mechanical means and wash the area thoroughly with water and detergents. Send to the storage waiting for the company specialized disposal. If the payment is done on the highway or public place, adequate precautions must be taken in order to protect people from any risk.

Handling and storage

Precautions for safe handling
- Recommendations for safe handling: Keep away from sources of ignition. Handle in a well ventilated room. Avoid contact with materials / incompatible substances.
Wear appropriate PPE. Keep the substance away from the waste water.
- Recommendations of occupational hygiene: Do not eat, drink or smoke in work areas. Wash hands after use. Remove contaminated clothing and PPE before entering areas in which food is consumed.

Conditions for safe storage, including any incompatibilities
How to manage risks associated with:
- Potential sources of ignition: Do not expose to heat sources.
Mode of containment of the effects of:
- Weather conditions: Do not expose to high temperatures.
- Environmental pressure: not expected mode of containment.
- Temperature: Store at a temperature between +5 ° C and +35 ° C
- Sunlight: Do not expose to direct sunlight.
- Moisture: Do not store in damp conditions.
- Vibration is not expected mode of containment.

Maintaining the integrity of substances:
- Stabilizers: Not expected the use of stabilizers.
- Antioxidant: Not expected the use of antioxidants.
Other recommendations:
- Ventilation: Request based on the storage of the substance.
- Specific design for storage rooms: Not required based on the classification of the substance.
- Quantitative limits storage: Not required based on the classification of the substance.

Transport information

Land transport (ADR/RID)

UN number:
NA
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
NA
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
NA
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
NA
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
- Monitoring: The measurement of substances in the workplace should be performed with standardized methods (eg UNI EN 689:1997: Atmosphere at work - Guidance on assessment of exposure by inhalation to chemical agents for the comparison with limit values ​​and measurement strategy; UNI EN 482:2006: atmospheres in the workplace - General requirements for the performance of procedures for the measurement of chemical agents) or, in their absence, with appropriate methods.

Individual protection measures, such as personal protective equipment
a) Eye / face: Safety glasses according to EN 166, face shield.
b) Skin protection
- Hand protection: Wear protective gloves. The glove material has to be impermeable and resistant to the product / the substance / the preparation. Material: Nitrile (nitrile rubber), hypoallergenic. Thickness: not less than 0.12 mm.
- Other, protection Choose body protection must be chosen depending on activity and possible exposure, eg. boots, chemical-protection suit according to the EN 14605 in case of splashes or EN ISO 13982 in case of dust.
c) Respiratory protection: If the risk assessment shows the need for air-purifying respirators, use a dust mask type P1, P2 and P3 (EN 143). Use respirators and components tested and approved under appropriate government standards such as NIOSH (U.S.) and CEN (EU). In case of brief exposure or low pollution use respiratory filter P1 for dust category 2a (inert dusts with TLV 10 mg/m3) Immediately remove all soiled and contaminated clothing apparatus.
d) Thermal hazards: Not provided for in the standard practice of using the substance. Assess any personal protective equipment according to specific conditions of use of the same.

Stability and reactivity

Reactivity
The substance is not considered reactive under normal conditions of use.

Chemical stability
The substance is stable in normal conditions of temperature and pressure and when stored in closed containers in a cool, ventilated area.

Conditions to avoid
Avoid exposure to light, air, moisture and excessive heat.

Incompatible materials
Strong oxidizing agents.

Hazardous decomposition products
Heating at high temperatures decomposes releasing toxic fumes and gases to COx

Disposal considerations

Waste of the substance: landfill
Packaging / containers contaminated landfill
It is not recommended disposal through wastewater.
Refer to the relevant Community / national / local regulations on waste disposal.