Registration Dossier

Administrative data

First-aid measures

General information:
In case of adverse health effects seek medical advice.

After inhalation:
If breathed in, move person into fresh air.
If symptoms persist, call a physician.
Keep patient warm and at rest.
If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.

After skin contact:
In case of contact, immediately flush skin with soap and plenty of water.
Do NOT use solvents or thinners.
If skin irritation persists, call a physician.

After eye contact:
Protect unharmed eye.
If easy to do, remove contact lens, if worn.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

After ingestion:
If swallowed, seek medical advice immediately and show this container or label.
If swallowed, DO NOT induce vomiting.
If a person vomits when lying on his back, place him in the recovery position.

Fire-fighting measures

In the event of fire, wear self-contained breathing apparatus.
Use personal protective equipment.

Standard procedure for chemical fires.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
In the event of fire and/or explosion do not breathe fumes.
Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Use personal protective equipment (safety glasses, protective gloves EN 374).
Avoid contact with skin and eyes.
Ensure adequate ventilation, especially in confined areas.
Avoid inhalation of vapour or mist.

Do not flush into surface water or sanitary sewer system.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.

Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
Clean contaminated surface thoroughly.

Handling and storage

Advice on safe handling:
Store in original container.
Keep containers tightly closed in a dry, cool and well ventilated place.
Protect from frost, heat and sunlight.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

In the case of vapour formation use a respirator with an approved filter.

Handle in accordance with good industrial hygiene and safety practice.

Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Wear eye/face protection.

Hand protection:

Nitrile rubber
Break through time: > 4 h (depending on application)
Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work.

Stability and reactivity

Chemical stability: No decomposition expected if used as directed.
Hazardous reactions: No decomposition if stored and applied as directed.
Hazardous decomposition: Build-up of dangerous/toxic fumes possible in cases of fire/high temperature.

Disposal considerations

Waste incineration or disposal with the approval of the responsible local authority.