Registration Dossier

Administrative data

First-aid measures

General advice : Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.
Inhalation : Move to fresh air in case of accidental inhalation of dust or
fumes from overheating or combustion.
If symptoms persist, call a physician.
Skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
Eye contact : Flush eyes with water as a precaution.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
Ingestion : Clean mouth with water and drink afterwards plenty of water.
Do NOT induce vomiting.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Obtain medical attention.

Fire-fighting measures

Suitable extinguishing media : Dry chemical
Alcohol-resistant foam
Carbon dioxide (CO2)
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Unsuitable extinguishing
media
: High volume water jet
Special protective equipment
for fire-fighters
: In the event of fire, wear self-contained breathing apparatus.
Further information : Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions : Use personal protective equipment.
Ensure adequate ventilation
Remove all sources of ignition.
Evacuate personnel to safe areas.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.
Environmental precautions : Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods for cleaning up : Contain spillage, and then collect with non-combustible
absorbent material, (e.g. sand, earth, diatomaceous earth,
vermiculite) and place in container for disposal according to
local / national regulations

Handling and storage

Handling
Advice on safe handling : Avoid exceeding of the given occupational exposure limits
(see section 8).
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Take precautionary measures against static discharges.
Container may be opened only under exhaust ventilation
hood.
Open drum carefully as content may be under pressure.
Dispose of rinse water in accordance with local and national
regulations.
Advice on protection against
fire and explosion
: Use explosion-proof equipment.
Avoid formation of aerosol.
Keep away from sources of ignition - No smoking.
Take measures to prevent the build up of electrostatic charge.
Storage
Requirements for storage
areas and containers
: Protect against light.
: No smoking.
Store in cool place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Electrical installations / working materials must comply with
the technological safety standards.
Keep container tightly closed and dry.
Storage temperature : < 25 °C

Transport information

Land transport (ADR/RID)

UN number:
1993
Proper shipping name and description:
not relevant - on-site intermediate
Class:
3
Classification code:
F1
Packaging group:
III
Labels:
3
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
1993
Proper shipping name and description:
not applicable
Class:
III
Classification code:
F1
Packaging group:
III
Labels:
3
Remarksopen allclose all

Marine transport (IMDG)

UN number:
1993
Class:
3
Packaging group:
III
EmS code:
F-E, S-E
Labels:
3
Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Respiratory protection : In the case of vapour formation use a respirator with an
approved filter.
Hand protection : Glove material: Viton (R)
Solvent-resistant gloves
Consider the hazard characteristics of this product and any
special workplace conditions when selecting the appropriate
type of protective gloves.
Eye protection : Safety glasses with side-shields
Skin and body protection : Choose body protection according to the amount and
concentration of the dangerous substance at the work place.
Hygiene measures : Handle in accordance with good industrial hygiene and safety
practice.
Wash hands before breaks and at the end of workday.

Stability and reactivity

Conditions to avoid : Heat.
Heat, flames and sparks.
Materials to avoid : Acids
: Strong bases
Strong oxidizing agents
Hazardous reactions : Reacts violently with:
trace amounts of acids
: Vapours may form explosive mixture with air.

Disposal considerations