Registration Dossier

Diss Factsheets

Administrative data

Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
other: see 'Remark'
Remarks:
The reliability is rated 2 because the study followed the standard guideline of reference (EU A.10 method), which describes a procedure designed to evaluate this endpoint, the results were reviewed for reliability and assessed as valid. Nevertheless no information was available wheter or not the study was conducted under GLP condition.

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2008
Report date:
2008

Materials and methods

Test guideline
Qualifier:
according to guideline
Guideline:
EU Method A.10 (Flammability (Solids))
Deviations:
no
GLP compliance:
no

Test material

Constituent 1
Reference substance name:
Mono and bis and tris{tris[4-(mono and dimethylamino)phenyl]methylium} [12,21,30,32-tetrahydro-29H,31Hphthalocyanine- mono, bis and trisulfonato-k4N29,N30,N31,N32]cuprate.
IUPAC Name:
Mono and bis and tris{tris[4-(mono and dimethylamino)phenyl]methylium} [12,21,30,32-tetrahydro-29H,31Hphthalocyanine- mono, bis and trisulfonato-k4N29,N30,N31,N32]cuprate.
Details on test material:
- Name of test material (as cited in study report):Sepisol Fast Violet 2B
- Substance type: organocopper
- Appearance/Physical state: dark violet powder
- Lot/batch No.: 129638

Results and discussion

Flammable solids
Test procedure:
burning time (test type not further specified)
Remarks:
or specified in description of method (migrated information)
Burning time:
0 s
Remarks on result:
other: the combustion front does not reach the first reference
Pyrophoric solids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.
Pyrophoric liquids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.

Any other information on results incl. tables

the combustion front does not reach the first reference

Applicant's summary and conclusion

Interpretation of results:
non flammable
Remarks:
Migrated information
Conclusions:
Under the experimental conditions, and during a preliminary test, the combustion front does not reach the first reference. As a result,
SEPISOL FAST VIOLET 2B is not considered as a flammable solid.
Executive summary:

A test to determine if Sepisol Fast VIOLET 2B is a flammable solid has been carried out by following the EU method A.10.

The test material is formed into an unbroken strip or powder train about 250 mm long by 20 mm wide by 10 mm high on a non-combustible, non-porous and low heat -conducting base plate. A hot flame from a gas burner is applied to one end of the powder train until the powder ignites for a maximum of 2 minutes.

During the preliminary assay, the combustion front does not reach the first reference.

It has been concluded that Sepisol Fast VIOLET 2B was not a flammable solid according to the annex V of directive EC/67/548.