Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 938-148-1 | CAS number: 375-45-1
Guidance on Safe Use
Administrative data
First-aid measures
1.Description of first aid measures
1.1. If inhaled
- Remove to fresh air.
- Oxygen or artificial respiration if needed.
1.2. In case of eye contact
- Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
- If eye irritation persists, consult a specialist.
1.3. In case of skin contact
- Wash off with soap and water.
1.4. If swallowed
- Drink 1 or 2 glasses of water.
- Do NOT induce vomiting.
- If symptoms persist, call a physician.
2. Most important symptoms and effects, both acute and delayed
2.1. Inhalation
- Causes respiratory tract irritation.
2.2. Skin contact
- Symptoms: Redness, Irritation
2.3. Eye contact
- Contact with eyes may cause irritation.
- Redness
2.4. Ingestion
- Ingestion may provoke the following symptoms:
- Symptoms: Nausea, Vomiting, Diarrhoea
3. Indication of any immediate medical attention and special treatment needed
- None.
Fire-fighting measures
1. Extinguishing media
1.1. Suitable extinguishing media
- Water
- powder
- Foam
- Dry chemical
- Carbon dioxide (CO2)
1.2. Unsuitable extinguishing media
- None.
2. Special hazards arising from the substance or mixture
- The product is not flammable.
- Not explosive
- The pressure in sealed containers can increase under the influence of heat.
- Explosive reaction may occur on heating or burning.
- Thermal decomposition can lead to release of toxic and corrosive gases.
3. Advice for firefighters
- Wear self-contained breathing apparatus and protective suit.
- When intervention in close proximity wear acid resistant over suit.
- Evacuate personnel to safe areas.
- Approach from upwind.
- Protect intervention team with a water spray as they approach the fire.
- Keep containers and surroundings cool with water spray.
- Keep product and empty container away from heat and sources of ignition.
Accidental release measures
1. Personal precautions, protective equipment and emergency procedures
1.1. Advice for non-emergency personnel
- Prevent further leakage or spillage if safe to do so.
1.2. Advice for emergency responders
- Ensure adequate ventilation.
- Sweep up to prevent slipping hazard.
- Keep away from open flames, hot surfaces and sources of ignition.
2. Environmental precautions
- Should not be released into the environment.
- Do not flush into surface water or sanitary sewer system.
3. Methods and materials for containment and cleaning up
- Soak up with inert absorbent material.
- Suitable material for picking up
- Dry sand
- Earth
- Shovel into suitable container for disposal.
4. Reference to other sections
- Refer to protective measures listed in sections HANDLING AND STORAGE and EXPOSURE CONTROLS/PERSONAL PROTECTION.
Handling and storage
1. Precautions for safe handling
- No special handling advice required.
- Ensure adequate ventilation.
- Use personal protective equipment.
- Keep away from heat and sources of ignition.
- To avoid thermal decomposition, do not overheat.
- Take measures to prevent the build up of electrostatic charge.
- Clean and dry piping circuits and equipment before any operations.
- Ensure all equipment is electrically grounded before beginning transfer operations.
2. Conditions for storage, including incompatibilities
2.1. Storage
- No special storage conditions required.
- Keep in properly labelled containers.
- Keep in a cool, well-ventilated place.
- Keep away from heat and sources of ignition.
- Keep away from combustible material.
- Keep away from Incompatible products.
- Provide tight electrical equipment well protected against corrosion.
- Refer to protective measures listed in sections 7 and 8.
2.2. Packaging material
2.2.1. Suitable material:
- PTFE lined stainless steel 304 L or 316 L.
- Stainless steel
- Steel drum
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- None. The substance does not meet the identifying criteria for hazard in transport.
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- None. The substance does not meet the identifying criteria for hazard in transport.
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Classification is not required since the product does not meet the identifying criteria for hazard in transport.
Marine transport (UN RTDG/IMDG)
- UN number:
- None. The substance does not meet the identifying criteria for hazard in transport.
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Classification is not required since the product does not meet the identifying criteria for hazard in transport.
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- None. The substance does not meet the identifying criteria for hazard in transport.
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Classification is not required since the product does not meet the identifying criteria for hazard in transport.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
1. Control parameters
1.1. Exposure Limit Values
Remarks:
- Threshold limit values of by-products from thermal decomposition
Hydrogen fluoride anhydrous
- US. ACGIH Threshold Limit Values 12 2010
time weighted average = 0.5 ppm
Remarks: as F
- US. ACGIH Threshold Limit Values 12 2010
Ceiling Limit Value = 2 ppm
Remarks: as F
- EU. Indicative Exposure and Directives relating to the protection of risks related to work exposure to chemical, physical, and biological agents. 12 2009
time weighted average = 1.8 ppm
time weighted average = 1.5 mg/m3
Remarks: Indicative
- EU. Indicative Exposure and Directives relating to the protection of risks related to work exposure to chemical, physical, and biological agents. 12 2009
Short term exposure limit = 3 ppm
Short term exposure limit = 2.5 mg/m3
Remarks: Indicative
- US. ACGIH Threshold Limit Values 12 2010
Remarks: as F, Can be absorbed through skin.
Carbonyl difluoride
- US. ACGIH Threshold Limit Values 2009
time weighted average = 2 ppm
- US. ACGIH Threshold Limit Values 2009
Short term exposure limit = 5 ppm
- EU. Indicative Exposure and Directives relating to the protection of risks related to work exposure to chemical, physical, and biological agents. 12 2009
time weighted average = 2.5 mg/m3
Remarks: Indicative
Hydrogen chloride
- US. ACGIH Threshold Limit Values 12 2010
Ceiling Limit Value = 2 ppm
- EU. Indicative Exposure and Directives relating to the protection of risks related to work exposure to chemical, physical, and biological agents. 12 2009
time weighted average = 5 ppm
time weighted average = 8 mg/m3
Remarks: Indicative
- EU. Indicative Exposure and Directives relating to the protection of risks related to work exposure to chemical, physical, and biological agents. 12 2009
Short term exposure limit = 10 ppm
Short term exposure limit = 15 mg/m3
Remarks: Indicative
Carbon monoxide
- Europe. Commission Directive 2017/164/EU establishing a fourth list of indicative occupational exposure limit values
time weighted average = 20 ppm
time weighted average = 23 mg/m3
Remarks: Indicative
- Europe. Commission Directive 2017/164/EU establishing a fourth list of indicative occupational exposure limit values
Short term exposure limit = 100 ppm
Short term exposure limit = 117 mg/m3
Remarks: Indicative
- US. ACGIH Threshold Limit Values 2009
time weighted average = 25 ppm
2. Exposure controls
2.1. Appropriate engineering controls
- Ensure adequate ventilation.
- Refer to protective measures listed in sections 7 and 8.
- Apply technical measures to comply with the occupational exposure limits.
2.2. Individual protection measures
2.2.1. Respiratory protection
- Use respirator when performing operations involving potential exposure to vapour of the product.
- The filter class for the respirator must be suitable for the maximum expected contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If this concentration is exceeded, self-contained breathing apparatus must be used.
- Use only respiratory protection that conforms to international/ national standards.
- Remove respiratory and skin/eye protection only after vapours have been cleared from the area.
2.2.2. Hand protection
- Rubber gloves
- Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
2.2.3. Eye protection
- Tightly fitting safety goggles
2.2.4. Skin and body protection
- Long sleeved clothing
- Safety shoes
2.2.5. Hygiene measures
- Ensure that eyewash stations and safety showers are close to the workstation location.
- When using do not eat, drink or smoke.
- Wash hands before breaks and at the end of workday.
- Handle in accordance with good industrial hygiene and safety practice.
2.3. Environmental exposure controls
- Dispose of rinse water in accordance with local and national regulations.
Stability and reactivity
1. Reactivity
- No dangerous reaction known under conditions of normal use.
2. Chemical stability
- Stable under recommended storage conditions.
3. Possibility of hazardous reactions
- No dangerous reaction known under conditions of normal use.
4. Conditions to avoid
- To avoid thermal decomposition, do not overheat.
- Keep away from flames and sparks.
5. Incompatible materials
- Strong bases, sodium and potassium hydroxide
- Metals, Alkali metals, Alkaline earth metals
- Aluminum and magnesium in powder form
- Oxidizing agents
6. Hazardous decomposition products
- Gaseous hydrogen fluoride (HF)., Fluorophosgene, Gaseous hydrogen chloride (HCl)., Carbon monoxide
Disposal considerations
1. Waste disposal methods
- Can be incinerated, when in compliance with local regulations.
- The incinerator must be equipped with a system for the neutralisation or recovery of HF.
- In accordance with local and national regulations.
2. Contaminated packaging
- Purge the container with nitrogen and direct the gas to a treatment plant.
- Empty containers can be landfilled, when in accordance with the local regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
