Registration Dossier

Administrative data

First-aid measures

Eye Contact: Immediately wash eyes with fresh water for at least 15 minutes, lifting lower and upper eyelids occasionally and seek medical attention immediately.

Skin Contact: Remove contaminated clothing as soon as possible; this will be a fire hazard.
Wash exposed skin thoroughly with soap and water. If irritation persists, consult a physician.
Launder contaminated clothing before re-use. Badly contaminated leather shoes or clothing should be discharged.

Inhalation: In event over-exposure remove individual to fresh air, taking steps necessary to protect the rescuer. If victim is unconscious but breathing, place in recovery position.
If not breathing, administer artificial respiration. Immediately seek medical assistance

Ingestion: Aspiration hazard. If this substance is swallowed, DO NOT INDUCE VOMITING.
If vomiting begins, lower victim´s head in an effort to prevent vomit from entering lungs. Immediately seek medical assistance.
If victim is unconscious do not attempt to administer fluids, place in recovery position and protect airway.

Fire-fighting measures

Extinguishing media: Use water spray, dry chemical, foam or carbon dioxide.

Accidental release measures

Shut off source and contain with sand or earth to prevent entry to watercourses and sewers. Contain spill immediately in smallest area possible.
Measures for environmental protection: Prevent contamination of surface water and groundwater and soil.

Handling and storage

Handle in well-ventilated area or provide efficient exhaust ventilation. Wear long sleeved, chemical resistant gloves, safety glasses if there is risk of splashing. Avoid prolonged contact with the skin.

Store in properly designed tanks or approved tightly closed containers in cool, well-ventilated places, keep away from sources of ignition. Protect from static discharges.

All hazard precaution given here must be applied to handling of empty containers.

Transport information

Land transport (ADR/RID)

UN number:
Shippingopen allclose all
Packaging group:
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Technical protection measures:
Appropriate engineering controls relevant to task.
- Containment as appropriate;
- Segregation of the emitting process;
- Good standard of general ventilation;
- Effective contaminant extraction;

Organisational protection measures
- Minimisation of manual phases;
- Minimise number of staff exposed;
- Management/supervision in place to check that the RMMs in place are being used correctly and OCs followed;
- Training for staff on good practice;
- Avoidance of contact with contaminated tools and objects;
- Regular cleaning of equipment and work area;
- Good standard of personal hygiene

Personal protective equipment:
- Substance/task appropriate gloves;
- Skin coverage with appropriate barrier material based on potential for contact with the chemicals;
- Substance/task appropriate respirator;
- Eye protection.
- Optional face shield;

Eye/face protection
Safety glasses with side-shields conforming to EN166 are required when exposed to vapour or when splashing is possible. Eye wash should be provided.

Skin and body protection
Unprotected exposure by skin contact should be avoided. Protective clothing consisting from impervious gloves (nitrile rubber or PVC) and coveralls should be used when necessary to avoid skin contact.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC (standard EN 374).
Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Complete suit protecting against chemicals. The type of protective equipment must be selected according to the concentration and amount of the dangerous substances at the specific workplace.

Respiratory protection
For nuisance exposures use type P1 (EU EN 143) particle respirator. For higher level protection use type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards such as CEN (EU).

Stability and reactivity

Chemical stability
Stable under normal storage conditions.

Conditions to avoid
Do not heat above flash point. Avoid naked flames and sparks.

Incompatible materials
Strong oxidizing agents, strong reducing agents, acids.

Hazardous decomposition products
Does not decompose under normal conditions.

Hazardous combustion products
Carbon monoxide, polycyclic aromatic hydrocarbons, unburnt hydrocarbon, oxides of nitrogen.

Electrostatic accumulation hazard

Disposal considerations

When material cannot be re-cycled or incinerated in safe manner, it should be disposed of in accordance with local regulations.