Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

First aid: general information:
Pay attention to self-protection.
Remove victims from hazardous area.
Keep warm, position comfortably, and cover well.
Do not leave affected persons unattended.

First aid inhalation:
Move victims into fresh air.
If the casualty is not breathing: Perform mouth-to-mouth
resuscitation, notify emergency physician immediately.

First aid skin:
Wash off affected area immediately with plenty of water.
Continue decontamination with polyethylene glycol 400 after initial rinsing with water and then wash with water and soap.
If symptoms persist, consult a physician for treatment.

First aid eye:
With eye held open, thoroughly rinse immediately with plenty of water for at least 10 minutes.
Consult an ophthalmologist immediately if the symptoms persist.

First aid ingestion:
Rinse out mouth.
Immediately give large quantities of water to drink.


Consult a physician immediately.

Fire-fighting measures

Extinguishing media:
Suitable: water spray, foam, dry powder

Hazards during fire-fighting:
Hazardous fumes in fires, specific to the product: nitrogen oxides (NOx)
Under certain fire conditions, traces of other toxic products may occur.


Accidental release measures

Personal precautions:
Use personal protective equipment.

Environmental Precautions:
Advice: General
Should not be released into the environment.

Methods for cleaning or taking up:
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Fill into marked, sealable containers.



Handling and storage

Advice on safe handling:
Avoid contact with skin and eyes.

Fire and explosion protection:
No special precautions required.

Storage requirements:
Advice: Keep container tightly closed.

Further info on storage conditions
Observe prohibition against storing together!


Transport information

Land transport (ADR/RID)

UN number:
2922
Shippingopen allclose all
Class:
8
Classification code:
CT1
Packaging group:
II
Labels:
8
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
2922
Shippingopen allclose all
Class:
8
Classification code:
CT1
Packaging group:
II
Labels:
8
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2922
Proper shipping name and description:
CORROSIVE LIQUID, toxic, n.o.s. (contains Diaminodicyclohexylmethane)
Chemical name:
Formaldehyde, polymer with benzenamine, hydrogenated
Class:
8
Packaging group:
II
EmS code:
F-A, S-B
Labels:
8
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
2922
Proper shipping name and description:
CORROSIVE LIQUID, toxic, n.o.s. (contains Diaminodicyclohexylmethane)
Chemical name:
Formaldehyde, polymer with benzenamine, hydrogenated
Class:
8
Packaging group:
II
Labels:
8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Hand protection:
The following details refer to information provided by Kächele-Cama Latex GmbH, Am Kreuzacker 9, D-36124 Eichenzell, www.kcl.de, which
supplies the corresponding protective gloves.
Type of material nitrile rubber (Dermatril)
Material thickness 0,1 mm
Breakthrough time 480 min

Eye protection:
close-fitting protective goggles (e.g. closed goggles)

Body protection:
Use protective clothing / face shield if necessary.

Industrial hygiene:
Do not inhale vapours / aerosols.
Avoid contact with skin and eyes.
Remove immediately all contaminated clothing.

Stability and reactivity

Hazardous reactions: No dangerous reactions known.
Further info on stability: Stable under recommended storage conditions.
No decomposition if used as directed.

Decomposition products:
Decomposition products in combustion and thermal decomposition.
Organic and nitrogen containing decomposition products
carbon monoxide, carbon dioxide

Disposal considerations

With respect to local regulations, e.g. dispose of to waste incineration plant no waste key number as per the European Waste Types List can be assigned to this product, since such classification is based on the (as yet undetermined) use to which the product is put by the consumer. The waste key number must be determined as per the European Waste Types List (decisionon EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.