Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

4.1 Description of first aid measures
Skin
Wash with soap and water. Remove contaminated clothing. Get medical attention if irritation develops. Launder contaminated clothing before reuse.
Eyes
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center or doctor.
Inhaled
Remove exposed person to fresh air if adverse effects are observed. If experiencing respiratory symptoms call a poison center or doctor.
Swallowed
Do NOT induce vomiting. Never give anything by mouth to a person who is losing consciousness, unconscious or convulsing. Call a poison center or doctor if
exposed or you feel unwell.
Advice for first-aid providers
When providing first aid always protect yourself against exposure to chemicals or blood born diseases by wearing gloves, masks and eye protection. After
providing first aid wash your exposed skin with soap and water.

4.2 Most important symptoms and effects, both acute and delayed
See section 11.

4.3 Indication of any immediate medical attention and special treatment needed
Note to physician: Treat symptomatically.

Fire-fighting measures

CO2, dry chemical, foam, water spray, water fog. Water can be used to cool and protect exposed material.

5.2 Special hazards arising from substance or mixture
Container may rupture in a fire situation. DO NOT USE a solid stream of water. See section 10 for additional information.

5.3 Advice for firefighters
Recommend wearing self-contained breathing apparatus. Water may cause splattering. Use water to cool containers exposed to fire. A solid stream of water will
spread the burning material. Do not release chemically contaminated water into drains, soil or surface water.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Only trained personnel should be permitted in area. Personal protective equipment must be worn. Ventilate area if spilled in a confined space or other poorly
ventilated area. Material on floor may be slippery.

6.2 Environmental precautions
Take precautions to avoid release to the environment. Do not flush into surface water, sanitary sewer or ground water system.

6.3 Methods and material for containment and cleaning up
Shut off leak if without risk. Pick up free liquid for recycle and/or disposal. Pump any free liquid into an appropriate closed container. Residual liquid can be
absorbed on inert material. Place in metal containers for recovery or disposal.

6.4 Reference to other sections
See sections 8 and 13 for additional information.

Handling and storage

7.1 Precautions for safe handling
Keep containers closed when not in use. Do not discharge into drains or the environment, dispose to an authorized waste collection point. Use appropriate
containment to avoid environmental contamination. When handling, do not eat, drink, or smoke. Do not get in eyes. Product can accumulate static charge when
handled. Equipment should be grounded. Use grounding and bonding connection when transferring material to prevent static discharge, fire and explosion. Use spark-resistant tools. Wash thoroughly after handling. Launder contaminated clothing before reuse. Empty containers retain material residue. Do not cut, weld,
braze, solder, drill, grind or expose containers to heat, flame, spark or other sources of ignition. Dispose of packaging or containers in accordance with local,
regional, national and international regulations.
Pumping Temperature
15 °C, 59 °F
Maximum Handling Temperature
70 °C, 158 °F
Maximum Loading Temperature
70 °C, 158 °F

7.2 Conditions for safe storage, including any incompatibilites
Store separately from oxidizers. Take precautions to avoid release to the environment. Store in a cool, dry, well-ventilated area. Store separately from
incompatible materials. Keep container tightly closed. Do not store in open, unlabeled or mislabeled containers. See section 10 for incompatible materials.
Maximum Storage Temperature
45 °C, 113 °F

7.3 Specific end use(s)
End uses are listed in an attached exposure scenario when one is required.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.1 Control parameters

None known.

Other Exposure Limits
None known.

8.2 Exposure controls
If use generates a mist or vapor, local exhaust ventilation is recommended. Additional ventilation or exhaust may be required to maintain air concentrations below
recommended exposure limits.
Eye/face protection
Chemical goggles or faceshield.
Skin protection
Nitrile. Neoprene. Consult clothing/glove manufacturer to determine appropriate type of glove for given situation. Gloves should always be inspected before each
use and discarded if they show tears, pinholes, or signs of wear.
Long sleeve shirt is recommended. Launder contaminated clothing before reuse.
Respiratory Protection
Under normal use conditions, respirator is not usually required. Use appropriate respiratory protection if exposure to dust particles, mist or vapors is likely. Use
self-contained breathing apparatus for entry into confined space, for other poorly ventilated areas and for large spill clean-up sites.
Hygiene Measures
Wash thoroughly after handling this product. Do not eat, drink or smoke when using this product.
Environmental exposure controls
See section 6 for details.

Stability and reactivity

10.1 Reactivity
Carefully review all information provided in sections 10.2 - 10.6.

10.2 Chemical stability
Material is normally stable at moderately elevated temperatures and pressures.

10.3 Possibility of hazardous reactions
Will not occur.

10.4 Conditions to avoid
Do not expose to excessive heat, ignition sources, or oxidizing materials.

10.5 Incompatible materials
Strong oxidizing agents.

10.6 Hazardous decomposition products
Smoke, carbon monoxide, carbon dioxide, aldehydes and other products of incomplete combustion.

Disposal considerations

13.1 Waste treatment methods
All disposal practices must be in accordance with local, regional, national and international regulations. Do not dispose in landfill.
Empty container retains product residue and can be hazardous. Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat, flame,
sparks, static electricity, or other sources of ignition. Dispose of packaging or containers in accordance with local, regional, national and international regulations.