Registration Dossier

Administrative data

Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Testing was conducted between 02 April 2007 and 04 April 2007.
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: Study conducted to GLP and in compliance with agreed protocols, with no or minor deviations from standard test guidelines and/or minor methodological deficiencies, which do not effect the quality of the relevant results.

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2007
Report Date:
2007

Materials and methods

Test guideline
Qualifier:
according to
Guideline:
EU Method A.10 (Flammability (Solids))
Deviations:
no
GLP compliance:
yes (incl. certificate)

Test material

Reference
Name:
Unnamed
Type:
Constituent
Details on test material:
Sponsor's identification: C-Y9
Description : yellow powder
Lot number : MB-1
Date received : 06 March 2007
Storage conditions: room temperature, in the dark, over silica gel

Results and discussion

Flammable solids
Test procedure:
burning time (test type not further specified)
Remarks:
or specified in description of method (migrated information)
Remarks on result:
other: The pile failed to ignite during the two minutes that the Bunsen flame was applied.
Pyrophoric solids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.
Pyrophoric liquids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.

Any other information on results incl. tables

Preliminary screening test

The pile failed to ignite during the two minutes that the Bunsen flame was applied.

The result of the preliminary screening test obviated the need to perform the main test.

      

Moisture content

 

Determination A

Determination B

a)  Mass of loss bottle (g)

19.1271

18.9293

b)  Mass of loss bottle and test material (g)

20.1412

19.9323

c)  Mass of loss bottle and test material     after drying (g)

20.1100

19.9014

Moisture content (% w/w)

3.077

3.081

Mean moisture content (% w/w)

3.079

Applicant's summary and conclusion

Interpretation of results:
non flammable
Remarks:
Migrated information
Conclusions:
The test material has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.
Executive summary:

The flammability (solids) was determined using Method A10 specified in Commission Directive 92/69/EEC (which constitutes Annex V of Council Directive 67/548/EEC).

The test material has been determined to be not highly flammable.