Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: If vapour or mist is inhaled remove to fresh air. Seek
medical attnetion if breathing is difficult.
Emergency measure - Eyes: Rinse immediately with plenty of water for at least 15
minutes.
Emergency measure - Skin: Wash immediately with plenty of water and soap.
Emergency measure - Ingestion: Seek medical attention if gastrointestinal irritation
develops or persists.

Fire-fighting measures

Recommended extinguishing agent: Water spray, carbon dioxide or dry chemical

Product arising from burning: Oxides of carbon and phosphorus.

Product determined by test: N

Protective equipment: Firefighters, and others exposed, should wear self-contained
breathing apparatus.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.



Absorb spillages with a suitable inert material (eg sand or
soil). Carefully transfer the spillage to waste

containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original containers.

Clean the spillage area with water and detergent.


Dispose of waste material by incineration or landfill in
accordance with local regulations.

Handling and storage

Handling: The substance should be handled in accordance with good
industrial hygiene practices.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should confrom to the appropriate
international or national standards as follows;


Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166


The standards mentioned above should be regarded as a minimu
m.

Storage: Containers should be kept tightly closed and stored at
ambient temperature.

Packaging of the substance and or preparation: 55 gallon closed head polyethylene drum.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: None assigned.
Transport: No specific requirements.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None identified.

Chemical reaction with water: None

Dust explosion: Not applicable to a liquid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Not normally possible.

Industry - Possibility of neutralisation: Not applicable in the absence of any identified hazardous
effects.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages mixed with inert
material (e.g. sand or soil) may be disposed of by landfill
at an authorised tip in accordance with local regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditionsat a licensed waste treatment
processor in accordance with local regualtions. Stack gases
should be scrubbed because noxious fumes, including oxides
of carbon and phosphorus, could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. Adverse
effects on sewage treatment systems would be unlikely.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.