Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. Seek medical attention if respiratory
irritation develops.
Emergency measure - Eyes: Immediately flush eyes with copious amounts of water for at
least 15 minutes. Seek medical attention.
Emergency measure - Skin: Wash affected area with water and soap. Seek medical
attention if irritation develops.
Emergency measure - Ingestion: Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water spray, carbon dioxide or dry chemical extinguishers
may be used.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon and nitrogen
oxides). However, there is no experimental evidence to
support the anticipated combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.


Absorb spillages with a suitable inert material (eg sand or
soil). Carefully transfer the spillage to waste containers,
or use a sealed industrial vacuum machine. Containers filled
with waste material must be labelled in the same way as the
original containers.


Clean the spillage area with water and detergent.


Dispose of waste material by incineration or landfill in
accordance with local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves.

Chemical resistant clothing.

Eye protection.


When necessary appropriate respiratory protection should be
used. e.g. a vapour mask.


The standards mentioned above should be regarded as a
minimum.

Storage: Store in a cool, dry, well-ventilated area.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 200 litre steel drums.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None reported.
Transport: Avoid crushing the containers.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported

Chemical reaction with water: None reported which is hazardous.

Dust explosion: Not applicable, the substance is a liquid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration or landfill. In principle, it
may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: No chemical treatment is practicable to neutralise the
hazardous health properties.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local
regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon and
nitrogen oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.

Public at large - Possibility of recovery/recycling: Not applicable as the substance will not be made available
to the general public.

Public at large - Possibility of neutralisation: Not applicable as the substance will not be made available
to the general public.

Public at large - Possibility of destruction: controlled discharge: Not applicable as the substance will not be made available
to the general public.

Public at large - Possibility of destruction - incineration: Not applicable as the substance will not be made available
to the general public.

Public at large - Possibility of destruction - water purification: Not applicable as the substance will not be made available
to the general public.

Public at large - Possibility of destruction - others: Not applicable as the substance will not be made available
to the general public.