Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: If signs/symptoms develop, remove person to fresh air. If
signs/symptoms persist, get medical attention.
Emergency measure - Eyes: Flush eyes with large amounts of water. If signs/symptoms
persist, get medical attention.
Emergency measure - Skin: Wash affected area with soap and water. If signs/symptoms
develop, get medical attention.
Emergency measure - Ingestion: Do not induce vomiting unless instructed to do so by medical
personnel. Give victim two glasses of water. Never give
anything by mouth to an unconcious person. Get medical

Fire-fighting measures

Recommended extinguishing agent: Use fire extinguishers with class B extinguishing agents
(e.g. dry chemical carbon dioxide).

Product arising from burning: At elevated temperatures, hydrogen fluoride and toxic vapor
may arise upon decomposition.

Product determined by test: N

Protective equipment: Water may be used to blanket the fire. Exposure to extreme
heat can give rise to thermal decomposition. Wear full
protective equipment (Bunker Gear) and a self-contained
breathing apparatus.

Accidental release measures

Emergency measures in case of spillage: Evacuate unprotected and untrained personnel from hazard
area. The spill should be cleaned up by qualified personnel.
Ventilate the area with fresh air. Contain spill. For
larger spills, cover drains and build dikes to prevent entry
into sewer systems or bodies of water. Working from around
the edges of the spill inward, cover with bentonite,
vermiculite, or commercially available inorganic absorbent
material. Mix in sufficient absorbent until it appears dry.
Collect as much of the spilled material as possible. Clean
up residue with an appropriate solvent selected by a
qualified and authorized person. Read and follow safety
precautions on the solvent label and MSDS. Colect the
resulting residue containing solution. Place in an approved
metal. Seal the container. Dispose of collected material as
soon as possible.

Handling and storage

Handling: For industrial or professional use only. Avoid breathing of
vapors, mists or spray. Do not eat, drink or smoke when
using this product. Wash exposed areas thoroughly with soap
and water. Avoid skin contact with hot material. Do not
breath thermal decomposition products. Do not smoke while
using this product. Store work clothes separately from other
clothing, food and tobacco products. Avoid contact with
oxidizing agents. Avoid continuous exposure of the material
to extreme conditions of heat, i.e., above 150 °C (welding,
open flame, misuse or equipment failure). Avoid exceeding a
watt density of 50 watts/inch2 from a heater surface.
Contineous exposure to 150°C results in very slight
decomposition of this product and therefore, is a very
conservative use temperature threshold. Applications
involving exposure of the fluid to temperatures exceeding
150°C or watt densities exceeding 50 watts/inch2 have been
safely implemented.

Storage: Keep container in well-ventilated area. Keep container
tightly closed. Store away from heat. Store away from
oxidizing agents.

Packaging of the substance and or preparation: 1 Gallon - 12 Pound ( glass flask ) = 5.5 kg

3.25 Gallon - 40 Pound ( metal container : drum ) : 18.1 kg

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Transport code: UN3082
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None.

Chemical reaction with water: Not applicable.

Dust explosion: Not applicable for a fluid.

Disposal considerations

Industry - Possibility of recovery/recycling: 614 Recovery by destillation.

Industry - Possibility of destruction - incineration: 664 Incineration in halogen specific incinerator.