Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General information:

In case of accident or if you feel unwell seek medical advice (show label or SDS where possible).

After inhalation:

Provide fresh air.

After contact with the skin:

Wash with plenty of water or water and soap. In the event of a visible skin change or other complaints, seek medical advice (show label or SDS where possible).

After contact with the eyes:

Rinse immediately with plenty of water. Seek medical advice in case of continuous irritation.

After swallowing:

Give several small portions of water to drink. Do not induce vomiting.

Fire-fighting measures

Extinguishing media:

Suitable extinguishing media:

water spray, extinguishing powder, foam, alcohol-resistant foam.

Extinguishing media which must not be used for safety reasons:

water jet.

Special hazards arising from the substance or mixture

At low oxygen level: irritating substances. Heavy soot formation during combustion. Hazardous combustion products: carbon monoxide.

Advice for firefighters

Special protective equipment for fire fighting:

Use respiratory protection independent of recirculated air.

General information:

Fight fire from a safe distance.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Wear personal protection equipment. Avoid dust formation. Do not breathe dust. Avoid contact with eyes and skin.

Environmental precautions

Cover any spilled material in accordance with regulations to prevent dispersal by wind. Prevent material from entering surface waters, drains or sewers and soil. Dispose of in prescribed marked containers. Observe local/state/federal regulations.

Methods and material for containment and cleaning up

Damp down, absorb mechanically and dispose according to local/state/federal regulations. Avoid formation of dust and dust deposition.

Further information:

Eliminate all sources of ignition

Handling and storage

Precautions for safe handling:

Ensure adequate ventilation. Avoid dust formation.

Precautions against fire and explosion:

Fine dust may form explosive mixture with air. Avoid dust deposit, remove dust regularly. Take precautionary measures against electrostatic charging. Keep away from sources of ignition and do not smoke. Observe the general rules for fire prevention.

Conditions for safe storage, including any incompatibilities

Conditions for storage rooms and vessels:

Protect against light.

Advice for storage of incompatible materials:

Do not store together with oxidizing agents like peroxides etc.

Further information for storage:

Protect against light. Keep container tightly closed and store in a well-ventilated place. The effect of direct sunlight or UV radiation must be completely ruled out, even during transit. Store in a cool, temperature regulated location.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated for transport
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated for transport
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated for transport
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated for transport
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters:

-

Exposure controls:

Exposure in the work place limited and controlled

General protection and hygiene measures:

Do not breathe dust. Avoid contact with eyes and skin. Do not eat, drink or smoke when handling.

Personal protection equipment:

Respiratory protection

In case of dust formation: fine dust mask P2 .

Hand protection

rubber gloves . protective gloves coated with neoprene .

Eye protection

tight fitting protective goggles .

Skin protection

protective clothing, protective goggles/face protection

Exposure to the environment limited and controlled

Prevent material from entering surface waters, drains or sewers and soil.

Stability and reactivity

Reactivity; Chemical stability; Possibility of hazardous reactions

Risk of self accelerating decomposition reaction. Ensure adequate stabilisation.

Conditions to avoid:

Possibility of spontaneous polymerization of unstabilized product by ambient temperature. Ensure adequate stabilisation. Keep away from incompatiblesubstances. high temperatures.

Incompatible materials:

Radical initiators (peroxid, light, heat, heavy metal compounds) may cause polymerization.

Hazardous decomposition products

If stored and handled properly: none known.

Disposal considerations

Waste treatment methods

Material:

Recommendation:

Dispose of according to regulations by incineration in a special waste incinerator. Observe local/state/federal regulations.

Uncleaned packaging

Recommendation:

Completely discharge containers (no tear drops, no powder rest, scraped carefully). Containers may be recycled or re-used. Observe local/state/federal regulations. Uncleaned packaging should be treated with the same precautions as the material.