Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures: Not specifically necessary. Observance of good industrial hygiene is recommended.
Most important symptoms and effects, both acute and delayed: No episodes of damage to health ascribable to the product have been reported.
Indication of any immediate medical attention and special treatment needed: Information not available.
Fire-fighting measures
Extinguishing media
SUITABLE EXTINGUISHING EQUIPMENT
The extinguishing equipment should be of the conventional kind: carbon dioxide, foam, powder and water spray.
UNSUITABLE EXTINGUISHING EQUIPMENT None in particular.
Special hazards arising from the substance or mixture
HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE Do not breathe combustion products.
Advice for firefighters
GENERAL INFORMATION
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health. Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of contaminated water used for extinction and the remains of the fire according to applicable regulations.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS
Normal firefighting clothing i.e. fire kit (BS EN 469), gloves (BS EN 659) and boots (HO specification A29 and A30) in combination with self-contained open circuit positive pressure compressed air breathing apparatus (BS EN 137).
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Block the leakage if there is no hazard.
Wear suitable protective equipment (including personal protective equipment referred to under Section 8 of the safety data sheet) to prevent any contamination of skin, eyes and personal clothing. These indications apply for both processing staff and those involved in emergency procedures.
Environmental precautions
The product must not penetrate into the sewer system or come into contact with surface water or ground water.
Methods and material for containment and cleaning up
Collect the leaked product into a suitable container. If the product is flammable, use explosion-proof equipment. Evaluate the compatibility of the container to be used, by checking section 10. Absorb the remainder with inert absorbent material. Make sure the leakage site is well aired. Contaminated material should be disposed of in compliance with the provisions set forth in point 13.
Reference to other sections
Any information on personal protection and disposal is given in sections 8 and 13.
Handling and storage
Precautions for safe handling
Before handling the product, consult all the other sections of this material safety data sheet. Avoid leakage of the product into the environment. Do not eat, drink or smoke during use.
Conditions for safe storage, including any incompatibilities
Keep the product in clearly labelled containers. Keep containers away from any incompatible materials, see section 10 for details.
Specific end use(s)
Information not available.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
Information not available.
Exposure controls
Comply with the safety measures usually applied when handling chemical substances.
HAND PROTECTION None required.
SKIN PROTECTION None required.
EYE PROTECTION None required.
RESPIRATORY PROTECTION
None required, unless indicated otherwise in the chemical risk assessment.
ENVIRONMENTAL EXPOSURE CONTROLS
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.
Stability and reactivity
Reactivity: There are no particular risks of reaction with other substances in normal conditions of use.
Chemical stability: The product is stable in normal conditions of use and storage.
Possibility of hazardous reactions: No hazardous reactions are foreseeable in normal conditions of use and storage.
Conditions to avoid: None in particular. However, the usual precautions used for chemical products should be respected.
Incompatible materials: Information not available.
Hazardous decomposition products: Information not available.
Disposal considerations
Waste treatment methods
Reuse, when possible. Neat product residues should be considered special non-hazardous waste.
Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.
CONTAMINATED PACKAGING
Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
