Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

EYE CONTACT: Check for and remove any contact lenses. IMMEDIATELY flush
Eyes with running water for at least 15 minutes while keeping eyes open. Cold water
may be used. Seek medical attention.
SKIN CONTACT: After contact with skin, wash with plenty of water. Gently and thoroughly wash
the contaminated skin with running water and non-abrasive soap. Cold water may be used.
Cover the irritated skin with an emollient. Seek medical attention. Wash any contaminated
clothing before reusing.
INHALATION: Remove victim from source of exposure to fresh air. If breathing is difficult
administer oxygen. Seek medical attention.
INGESTION: Do not induce vomiting. Give water to victim to drink. Seek medical attention.

Fire-fighting measures

Extinguishing media: carbon dioxide, dry chemical powder, alcohol or polymer foam.
Special fire-fighting procedures: Wear self-contained breathing apparatus and protective
clothing to prevent contact with skin and eyes.
Unusual fire and explosion hazards/decomposition of product: emits toxic fumes under fire

Accidental release measures

Steps to be taken if material is released or spilled: Wear appropriate respirator, rubber boots
and heavy rubber gloves. Scoop up and place in an appropriate container. Ventilate area and
wash spill site after pickup is complete. Wash skin immediately with plenty of water. Absorb on
sand or vermiculite and place in closed containers for disposal.

Handling and storage

Technical measures: Handling is performed in a well ventilated place. Wear suitable
protective equipment. Prevent generation of vapor or mist. Keep away from heat/sparks/open
flame/hot surfaces. -No smoking. Take measures to prevent the build up of electrostatic
charge. Use explosion-proof equipment. Wash hands and face thoroughly after handling. Use
a closed system if possible. Use a ventilation, local exhaust if vapor or aerosol will be
Advice on safe handling: Avoid contact with skin, eyes and clothing. May develop
pressure. Open carefully.
Storage conditions: Store in cool place. Keep container tightly closed in a dry and
well-ventilated place. Containers which are opened must be carefully resealed and kept
upright to prevent leakage.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering controls: Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection: Protective gloves.
Eye protection: Safety glasses. A face-shield, if the situation requires.
Skin and body protection: Protective clothing. Protective boots.

Stability and reactivity

Stable under recommended storage conditions.
Materials to avoid: Oxidizing agents, Strong reducing agents

Disposal considerations


Categories Display