Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-381-8 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
If inhaled: Keep patient calm, remove to fresh air.
On skin contact: Wash thoroughly with soap and water.
On contact with eyes: Wash affected eyes for at least 15 minutes under running water with eyelids held open.
On ingestion: Rinse mouth and then drink plenty of water.
Fire-fighting measures
Harmful vapours and fumes/fog can be released in case of fire.
Contaminated extinguishing water must be disposed of in accordance with official regulations.
Accidental release measures
Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.
Cleaning up for large amounts: Pump off product.
Cleaning up for residues: Pick up with suitable absorbent material. Dispose of absorbed material in accordance with regulations.
Handling and storage
Protection against fire and explosion: No special precautions necessary.
Conditions for safe storage: Segregate from strong bases. Segregate from heavy-metal salts. Keep container tightly closed and in a cool place.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Eye protection: Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Hand protection: Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types.
General safety and hygiene measures: Handle in accordance with good industrial hygiene and safety practice.
Stability and reactivity
Reacts with alkalies. Reacts with heavy metal salts.
Substances to avoid: oxidizing agents, strong alkalies, heavy metal salts
No hazardous reactions/decomposition products if stored and handled as prescribed/indicated.
Disposal considerations
Packs that cannot be cleaned should be disposed of in the same manner as the contents.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
