Registration Dossier

Administrative data

First-aid measures

- General advice:
Take off all contaminated clothing immediately. Show this safety data sheet to the doctor in attendance.

- Following inhalation: Move to fresh air. If symptoms persist, call a physician.
- Following skin contact: Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician.
- Following eye contact: Immediately flush eye(s) with plenty of water. If symptoms persist, call a physician.
- Following ingestion: Rinse mouth with water. Do NOT induce vomiting. Call a physician immediately.
- Most important symptoms and effects: None known.

Fire-fighting measures

- Suitable extinguishing media:
Carbon dioxide (CO2)
Water spray
Dry powder
Foam

- Unsuitable extinguishing media:
High volume water jet

- Special hazards arising from the substance or mixture:
Hazardous decomposition products formed under fire conditions.
Can be released in case of fire: Carbon oxides

- Advice for fire fighter:
In the event of fire, wear self-contained breathing apparatus.
In case of fire do not inhale smoke, conflagration gases and steams.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

- Personal precautions:
Use personal protective equipment.

- Protective equipment and emergency procedures:
Ensure adequate ventilation.
Remove all sources of ignition.

- Environmental precautions:
The product should not be allowed to enter drains, water courses or the soil.
If the product contaminates rivers and lakes or drains inform respective authorities.
Pay attention to local or official regulations.

- Methods and material for containment and cleaning up:
Use mechanical handling equipment. Avoid dust formation.
Dispose of in accordance with local regulations.

Handling and storage

- Precautions for safe handling:
Advice on safe handling :
Avoid creating dust.
Provide sufficient air exchange and/or exhaust in work rooms. Remove all sources of ignition.
Mixture may charge electrostatically: always use earthing leads when transferring from one container to another.

Advice on protection against : fire and explosion
The material can accumulate static charge and can therefore cause electrical ignition.
Take measures to prevent the build up of electrostatic charge. Vapours may form explosive mixture with air.
Keep away from heat and sources of ignition.

Hygiene measures :
Avoid contact with skin, eyes and clothing.
Do not breathe dust.
Take off all contaminated clothing immediately.
Handle in accordance with good industrial hygiene and safety practice.

Conditions for safe storage, including any incompatibilities:
Requirements for storage:
Do always store in containers which correspond to the original areas and containers ones.
Keep container tightly closed. Keep in a dry, cool place.

Further information on storage conditions:
Prevent formation of dust and deposition.
Store container in a well ventilated position.
Store in cool, dry conditions in well sealed containers. Keep away from heat and direct sunlight.

Advice on common storage:
Do not store together with: Oxidizing agents

Specific use(s):
Consult the technical guidelines for the use of this substance/mixture.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Technical protection measures
Provide sufficient air exchange and/or exhaust in work rooms.

Hand protection
Material: Nitrile rubber
Break through time: > 480 min
Glove thickness: > 0.35 mm
Protective index: Class 6
The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other.
The obtained break through times according to EN 374 Part III are not measured under normal operating conditions.
Therefore a maximum usage time of 50% of the break through time is recommended.

5. Body protection
Wear suitable protective clothing (EN 14605)

6. Eye protection
Goggles (EN 166)

7. Respiratory protection
Use the indicated respiratory protection if the occupational exposure limit is exceeded and/or in case of product release (dust).
Recommended Filter type: Combination filter A/P (EN 141)

Stability and reactivity

1. Reactivity
No hazards to be specially mentioned.

2. Chemical stability
The product is chemically stable.

3. Possibility of hazardous reactions
Vapours may form explosive mixture with air.

4. Conditions to avoid
Extremes of temperature and direct sunlight.

5. Incompatible materials
Strong oxidizing agents

6. Hazardous decomposition products
No decomposition if stored and applied as directed.

Disposal considerations

Pay attention to local or official regulations.