Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Inhalation: Remove victim to fresh air immediately and keep the victim warm and rest. Get medical advice/attention. Keep at rest in a position comfortable for breathing. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Skin contact: Remove any contaminated clothing. Wash off affected area with plenty of water and soap. If pain, itching or rash occurs, get medical advice/attention.
Eye contact: Immediately flush eyes with running water for 15 minutes or more, seek medical attention. If present and easy to do Remove contact lenses.
Ingestion: If conscious to drink plenty of water. Seek immediate medical attention.
The protection of first-aiders: First-aiders should wear appropriate protections as needed.
Most important symptoms / effects, acute and delayed: No information.
Indication of immediate medical attention and special treatment needed if necessary: No information.

Fire-fighting measures

Suitable extinguishing media: Water, dry chemical, carbon dioxide, alcohol foam is valid.
Extinguishing agent shall not be used: Straight stream.
Specific Hazards: The gas generated by combustion contain carbon monooxide, NOx etc.
Specific Fire-Fighting Measures: Shut off fuel to fire and use suitable extinguishing agents.
Fight fire from an upwind position as far as possible.
In case of peripheral fires, promptly move containers to safe area.
If containers are immobile, keep cool by spraying water.
Special protective actions for firefighters: Wear appropriate protections (e.q., protective gloves, protective glasses and air breathing apparatus, etc).

Accidental release measures

Personal precautions, Protective Equipment and Emergency Procedures: Always wear protections during work. Fight fire from an upwind position. Remove those that can be the igniting sources nearby immediately. Keep unauthorized personnel away.
Environmental precautions: Do not release into the environment (water areas, soil).
Methods and Materials for Containment and Cleaning up: Large spills: Prevent flow by surrounding with sand, etc. Collect by scoop, attract machine, etc, and transfer to empty containers.
Small spills: Absorb or cover with sand or waste cloth, etc, and transfer to sealable containers.
Prevention of secondary disasters: Promptly remove sources of ignition in the vicinity and provide a fire extinguishing agent.

Handling and storage

Handling
Technical measures: Install emergency eye wash and shower equipment near the handling area.
Local and General Ventilation: Install adequate local ventilation equipment.
Precautions: Keep fire away. Avoid contact with eyes and skin.
Precautions for Safe Handling: Be careful when mixed with acids and oxidizing materials.
Wear appropriate protections (e.g. protective glasses and protective gloves, etc).
Avoid contact with skin, eyes and clothes. Wear conductive work clothes and work boots.
Storage
Technical measures: Keep away from sources of ignition.
Conditions for safe storage: Keep fire away. Avoid direct sunlight and rain.
Store in places equipped with air-conditioning and non-permeable floor, and ensure that the temperature is below 40 °C.
Material Used in Packaging/Containers: Use UN approved containers or containers approved by local and national authorities.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Respiratory protection: Wear gas masks for organic gas, supplied-air respirator, air breathing apparatus as needed.
Hand protection: Wear oil-resistant protective gloves.
Eye protection: Wear goggles, face shields, safety glasses with side shields.
Skin and Body Protection: Wear long-sleeved working clothing, and wear oil-resistant apron and boots as needed.

Stability and reactivity

Reactivity: There is no risk data related to reactivity.
Stability: Stable under normal temperatures and pressures.
Ignition and explosion may occur due to fire.
Possibility of Hazardous Reactions: This substance is not self-reactive or oxidizable. Heat may be generated when mixed with acids and oxidizing compound.
Conditions to avoid: Avoid contact with incompatible materials.
Incompatible materials: Acids and oxidizing compounds.
Hazardous decomposition products: Burning can produce carbon monoxide, nitrogen oxides.

Disposal considerations

All disposal practices must be in compliance with all Federal, State/Provincial and local laws and regulations.
Dispose of surplus and nonrecyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Vapor from product residues may create a highly flammable or explosive atmosphere inside the container.
Do not cut, weld or grind used containers unless they have been cleaned thoroughly internally. Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.

Categories Display